the simulation is quite simplistic rather than a full-on physics-backed sim like angethegreat's one. this does mean it's cheap to run CPU-wise, this one's running in the browser. which means something like this could be used in sim engines.

lots of engine layouts are possible and sound (to my ears) fairly good, including rotaries! no 2-stroke engines yet. I'm also not quite happy with how the burbles/pops sound.

turbo stustustustu is there in some of the cars, as well as straight-cut gear whine, and supercharger whine in the r53 mini. I'll record some more clips demo-ing these.

the cool thing is plugging in configs from real engine parameters, and having the result sound pretty close to reality with a bit of parameter twiddling. the v10 for example has that major-3rd harmonic interval that sounds so cool.

I went a bit overboard and had too much fun with the doppler flyby feature, and a 'tunnel' toggle. and the silly engine animations.

edit: I am a software engineer and have been passionately creating side projects like this for over 10 years, pls don't let the sloppy ui distract from how cool these engines sound

Quick POV comparison showing real-time cylindrical re-projection on steep 800R curved displays. SimCurve applies a geometric warp matched to the physical panel radius, eliminating horizon bending and peripheral stretching with zero input lag or FPS hit.

Built specifically for aggressive curves (800R–1000R) in sims that only output a standard flat projection—not needed for flat panels or gentle curves. Free trial is up on the SimCurve website for anyone who wants to test the geometry on their rig.

Managed to get my hands on a SimRep Engineering P9XX wheel as my “final” upgrade, coming from a ks wheel these high end wheels are worlds apart.
The pics are the evolution my rig has gone through the year.
Gear I’m currently running:
MOZA r25 ultra
MOZA handbrake and sequential shifter
MOZA ab6
MOZA crp2’s with haptic modules
MOZA ay210
MOZA mtp and mtpl throttle quadrant
MOZA mep rudder
DIY button box
34” g5
Honeycomb alpha
Wheel: Simrep P9XX

Couple of kids in my village collecting donations for a non profit going door were curious about a sim I was working on. They've never seen a sim before I showed them mine have them drive a little on the ring. Their reaction was genuinely priceless. Brought back the Good memory of when I first tried a simulator.

My rig is not aluminum profile so I am limited to the accessories I can use. Good thing I have a 3d printer and a general knowledge of 3d modeling.

The Amazon gated shifter only came with a cylinder shift knob so I also printed a spherical knob as well.

Looks like on 20th Race Room is getting a lot of new updates:

• UI update (menus)
• FFB update/fixes with new settings
• OpenXR support
• historical spa, laguna seca...
• rolling starts
• menu wheel support
• new vehicle dashboards
• ...

Looks very interesting to me. I stopped playing it as I had no love for its FFB and SteamVR, but I will try it out.

Just leaving this here in case others are unaware about this, like me.

Due to everyone hacking, the PlayStation, people are working on getting Gran turismo to the pc !

You all weren’t wrong, it was 2 days of building and a week of tuning but it’s done. It was not missing any parts but will say the “compatibility” of the mix of accessories I purchased definitely weren’t clearly easy to make work.

Pedal sliders don’t fit with the pedal tray upside down, so you are stuck with them being super high.

The adjustable base for the reclining seat doesn’t work with the cross bars it comes with on TR’s own RE2 seat. I left them off, so far so good.

The keyboard treat I bought from them won’t work because the TR one bracket block it from properly swinging in regardless of height and orientation. In the product photo they use it with a full width wheel deck not the TR one. Lesson learned.

I drilled holes in my monitor arm and it works fine for now.

My Logitech PRO DD is so huge that the TR one deck is still banging into my knees even after purchasing the v2 upgrade where the extruded aluminum can be flat instead of upright.

I think purchasing the full width wheel deck would solve all these problems, but it’s not as adjustable as the TR one. I think the real answer is upgrading to a front mount wheel hub in the future. Maybe Black Friday sales….

I just tried out the new Aston Martin Valkyrie Steering Wheel at the Simracing Expo in Frankfurt. Feels great for the price compared to other branded wheels.

What are your thoughts?

Hi! I'm from Brazil and I started sim racing about 3 weeks ago, on a Logitech G923.
I've been practicing car control and consistency with the Legends Ford '34 at Tsukuba.
My biggest struggle is getting the car to rotate, and I can't really feel whether I'm managing to drive the car at the limit.
I'm also having a hard time understanding what my main mistakes are, which makes it hard to be consistent, since I don't really understand what's happening.
Here's one of my laps (1:05.598), with the inputs overlay. Any feedback on what you see would help a lot. Thanks!

went all in on moza coming from the t598

my current setup-

r25 ultra base

cs pro wheel

ks pro wheel

mbooster active pedal

next level racing f-gt elite 160 rig

300 watt dayton base shackers front and rear

Hello guys!

Yesterday i had a post about which bundle should i choose and there were mixed comments someone said 9 nm is enough and ofc someone said even 12 is not enough.

I just came to a conclusion whatever will be on sales in the black friday promotion will be the choosen one.

However i dont have an exact rig on my mind, i searched up everything and found the one and only answer is a profile rig, but i dont want to spend that kind of money before christmas because i need to buy a lot of gifts. I want something that cheap and even that i can go with a profile and a used car seat that isnt really hitting it for me, if i buy a profile i want a seat that have my sweat on it.

My budget is around 250-300 euro and i saw this rig on aliexpress and a few people posted about it on reddit, but havent seen any videos about it and not a lot review however aliexpress buyers gave good reviews.

Do you have any else suggestions? I read that this rig usually on sales and can cost around 150-180 euros for that money i mean it can be bad to and put in the trash after 6 months and i can buy a profile.

Important note: i am 196 cm or 6’4 feet and 108 kg or around 240 lbs.

Thanks for the help!

More information on the new COBAL safety module, pace improvements, and Ferrari F50 support in the full Patreon post.

Thomas

Can someone that knows a thing or two about ergonomics help me out? I just installed a new set up moza pedals and can’t get them to feel good. I feel like I’m a correct distance from the wheel. On the brake my ankle starts to hurt on the marked area and my knee after a little bit. Seems a little too close. But the throttle seems like it’s too far away.

Just traded a Next Level Racing GT Lite (the older style folding one) for a nearly new Playseat Evolution and I am very happy. Looks much nicer, much more comfortable and everything fits nicely.

Also upgraded from the Moza SRP Lite pedals to the Logitech G RS pedals with the 75kg load cell, what a difference that has made, very nice pedal set on a budget.

ASR has it on sale for 25% off. For those who have it, or those looking for a higher end wheel base, do you think it is still a relevant buy in 2026 given it was released back 2019 (I believe).

The other I was looking at is the vnm elite/supreme. But I'm a sucker for discounts. What are your thoughts? Not interested in other wheelbases at the moment. Simucube/VNM are the only two I would consider upgrading to.

On the SimExpo I saw these pedals and was intrigued by the tilting heel cups. Now it may specifically have to do with Coanda drivers using them, given they are the fastest.

I own Simsonn pedals and I like them very much, I see no reason to upgrade. I found this 3D printing file and I would like to know whether someone owning the Simsonn or the Simjack pedals actually tried printing and attaching them. How/what was your experience?

https://www.printables.com/model/1478818-simsonn-tilting-heel-rest-side-plates-only (Side plate adapters for Simsonn) https://www.printables.com/model/1478258-simjack-pro-tilting-heel-rests (Cups + side plates for Simjack)

Happy racing!

Would be a phenomenal experience if my pc could run BeamNG VR at max settings

Hey guys, it's me again. I have this clip of mine and I want to get your opinions. This was also a fight for P1, but I see the guy trying to close the gap when he realized I'd won the position. Was it my fault, or did he just desperately close the gap?

When i click on checkout it redirects me to some random checkout . top website. I was trying to buy a gt omega prime with the rs12 seat on the eu website. Seems really weird, other than that the site seems completely normal.

Beginner racer here on a g29, I’ll mainly be playing gt7 and f1 with an eye on iRacing on pc in the future, should I get the rs50 now or wait for the Moza bundle? The main reason for waiting is the potential for a ks pro for a screen option

Hello,

Im building my own wheelbase and want to get the right sim for it. Ive previously played the f1 games and gran turismo 7 and Im looking for the following things in a sim:

-Track and car variety

-Good Singleplayer (Good AI, Career either through the game or mods) This is what I play mostly

-Somewhat alive multiplayer for the ocassional session

-Better physics than GT7

-Doesnt need a degree in computer science to setup ideally something more plug and play

Any input would be very helpful

Hi everyone,

I am looking to get a new seat for my rig and was lucky enough to attend the Expo this weekend. I made a point of trying as many seats as possible and cataloging my thoughts on them, and most likely I will go with the Treq STX.

But one seat stuck with me, the Wolf Racing Börü. I had never heard about them and bumped into them by mistake at the very end. They had some really nice and colorful rigs and a few seats. This one struck me as feeling very comfortable and luxurious. Very thick cushions and the fabric was very soft and pleasant to the touch. Price is very good as well, 470 euros and it comes with bracket + slider.

My reservations are only because I couldn't find much information about them. Nonthing on youtube, there is 1 reddit thread which is very negative but also old, etc.I was sure they were German, due to name and because their website only has German and English, but it turns out their are Turkish. Not that it matters all that much, but the staff at the expo didn't speak English and I struggled to get any basic information out of them. For exampe, I have no idea how thick the bracket is, if they sell replacement padding etc.

Anyone have experience with them? Anything you can share would be appreciated. Cheers

Hey guys,

New to sim racing, quite casusal with it, Currently I have a Sparco R100 I bought used but its quite tight on my hips and like foldable stand for the wheel base etc.

I've just purchased a GT Omega Art that will be coming soon. It isn't the best but space wise it will be exactly what I need.

What seat would you recommend? Ideally I'd like to find a car seat but think thats too much of a headache to do for someone like me. I want a seat that I can sim race in and also sit in to play playstation for a few hours for other games.

Right now I'm thinking the RS12 or the Next Level ERS3 but welcome to options from people who know better than me so please help me out! 😊