Possibly just a generic Apex set but still seems like a decent deal? Made in Taiwan

Picked up a pretty insane tool haul the other day. Haggled him down from $200 to $80. Barley had an idea of what I was picking up as the guy had horrible photos and didnt even photograph half of it! I thought i was picking up maybe 20% of this.

Got there and he was just like.. "yeah take all this too". Crazy. Best find in a while.

500 sockets

320 wrenches

Have yet to count the hand tools but easily 200+

Will give everything a nice soak in a DIY De-rust solution and then try to figure out what to do with it all. haha

[Wera RA 2 05008892001]

Many electrician's knives have a rather rugged design, but I really like the look of this TSUNODA EK-72.

The finish feels high-quality, the wooden handle is simple and elegant, and the hollow-ground blade opens smoothly. The distinctive tip shape, typical of electrician's knives, is also practical.

Weight: 107 g

Overall length: 177 mm

Blade length: 72 mm

Blade thickness: 3 mm

Stainless steel blade and frame, natural wood handle, and a liner lock.

**Edit- this is the top of a functional trainer weight stack - the piece that connects the two weight stacks together.

**This is hot-dip galvanized steel from Get RX’d

**I have the Allen key & the correct 6 side socket, I have wrenches and vice grips

**The hardware also came from Get RX’d but I think I put the wrong nut onto the bolt

Attempting to put together gym equipment & could not tighten this all the way so as I’m backing it off …I can’t get it loose. The bolt head is rounded so it’s extremely hard to keep it steady. I’ve tried vice grips & oil & put all my strength into it, tried holding bolt side still and nut side- cant get this thing loose!!! I think the nut is the incorrect size. I have no idea what to do next!

Got my first piece of Festool gear (I’m in Australia). Finally upgraded from an 18V Bosch 10L to a proper vacuum for my handyman business. I’m starting to do more custom cabinetry work and finding that I’m using a track saw and sanders more and making more mess than the little Bosch can cope with. Haven’t had a chance to properly use the MIDI yet but from a quick test I’m impressed with the suction and the whole thing feels very quality! Got the Bluetooth remote to go on the hose, I know I’m going to love that for when I’m up on the ladder drilling holes in walls for picture hangers!! Looking forward to putting it through its paces!

A guy was selling his dad's retirement machining tools and let me get this Central Machinery Tool Grinder for $120. It was unopened in the box and manufactured in 2004.

The whole thing is solid cast iron and weighs 100lbs. I'm so excited to add this to my metalworking setup and start grinding my own HSS lathe bits.

I know this might go more down the road of consumables rather than tools, but, thought it might be fun.

Got this for 20 bucks good deal or no

My old side cutters got so dull it sweating my hands even on cutting zip ties.I decided to get a knipex after i find out the Bosch 180mm VDE Pliers i bought from bosch isnt so great and i cant trust on buying anohter bosch hand tool.(Even with VDE its almost half of the of knipex).I was looking online and find these 2 at same price[Also both 180mm).Since this will be first knipex tool i will own i dont know what is the difference between them.They both come with gray comfort grip things but one got laser engraved brand on its body and other one is on the body itself.I dont know so much about it.

About to accept an offer for a helper position. The owner gave me this tool list, is there any brands that are go to or worth the money. Never bought tools before so I don’t want to just go to harbor freight to buy stuff if you guys have a better recommendation.

This bit of plastic tube from the power steering tank is stuck like glue in the hose any idea on how I might get it out like some sort of reverse pliers tweezers that push outward?? It’s super small my finger for scale
Not sure if right subreddit but thanks if anyone could help

https://www.youtube.com/watch?v=NxuOheGLfVQ

Had some trees and hedges that needed cutting.

Home Depot had this chainsaw for $249 on clearance with battery and charger. Makita is sending me a free extra battery on top of that from a promo.

Charles H. Day Co. had the hedge trimmer for $179, tool only.

Found a guy selling the 40V weed whacker for $80 new in box (he got two in order to qualify for an extra battery promo last year).

So $510 for chainsaw, hedge trimmers, weed whacker, 5ah battery, and 4ah batteries, all new. And probably $40 in gasoline driving all over town and checking lots of places to find the deals and get everything.

Charged up the battery and went to work on all the excess tree branches. (Tall ladder helped.) Literally filled up three entire compost bins with the trimmings, did all my hedges, and still had one bar of battery left.

I've used some gasoline chainsaws in the past, but this Makita is on a whole other level. It went like butter through basically everything. Nothing felt to remotely challenge this saw. I've never had that actual fun chainsawing, but that was actually a pleasurable experience.

The hedge trimmers are also beastly. They powered through the dead, dense hard buildup of sticks under our bushes without slowing down or bogging down.

I have not tried the weed whacker yet, but if it does bit whacks weeds as good as this saw saws branches, then I'll be shocked, because it's got the same industrial-feeling build quality as the others.

May just order that new TD005 impact from Japan based on this experience. Wish they had a release date for the US market version.

I have a 3/8 craftsman ratchet from the 80s that needed a rebuild, and last I looked a kit was $35 or so. This was $40 shipped on eBay. My first snap on ratchet. Someone seems to have filled the screws with glue/epoxy for some reason, any ideas how to get it out without wrecking the screws? Id like to clean it out and grease it.

Edit: I got the screws out, I had to melt the epoxy out with a lighter. No idea what possessed someone to do that

Edit 2: I cleaned all the old grease out, it was black, gummy, and smelled horrible. I put some new grease in it and cleaned the gunk out of the lettering on the outside and it works great now

When tools on marketplace haven't been completely destroyed by trade use or neglect, this is what you find in my part of the world.

It'd take an awful lot of sanding discs to make up for the lack of warranty and a brand new unit.

Yeah...

Theres a bunch. Some are a little rust. I honestly want to get rid of it quickly. Are they worth anything other than scrap?

Update: I will be scrapping them. Thanks

I’m a more beginner maker at home, I have some 3D printers, a soldering iron, electrical tools and I’m getting into the field more and more. I’ve dealt with a good bit of drills before at my school’s shop and my late grandfather’s shop. So I want to get a good general purpose drill and I am looking for any suggestions anyone might have. Thanks for reading and for your suggestions!

If you use solid paint markers like the Sakura I have and you let them dry, alcohol wipes rubbed lightly over the excess leaves the paint in the indents and cleans them off nicely!