If I ignore it it'll just go away right?

I have shifted my setup away from Frame Generation and spatial upscalers entirely.

Running the native Linux AppImage build via Steam Linux Runtime, the game is holding a locked, rock-solid 60 FPS natively:

• No Frame Generation: Interpolation tools (MAKO / LSFG-VK) are fully disabled, eliminating input latency penalties and motion artifacts.
• No Image Upscaling / Reconstruction: FSR, LS1, and external scalers are set to Off. The game renders at native resolution without post-processing blur or sharpening passes.
• Frame Pacing & Performance: By bypassing Proton translation layers and running directly on the Vulkan pipeline, frametimes remain flat at 60 FPS with full control responsiveness.

Important Setup Note (Non-Steam Shortcut Launch Fix)

As noted in the community issue/discussion submitted to u/FelipePrado0's repository:

• When adding gow3-x86_64.AppImage as a non-Steam shortcut in SteamOS, Steam often forces Proton automatically or locks the compatibility tool.
• Do not use Proton: Because the AppImage is a native Linux ELF binary, running it through Proton (Wine) causes the game to crash or fail to launch completely.
• The Fix: Go to the game shortcut's Properties > Compatibility, check Force the use of a specific Steam Play compatibility tool, and select Steam Linux Runtime.

Selecting Steam Linux Runtime tells SteamOS to launch the binary natively within Valve's Linux runtime environment without invoking Wine, allowing it to boot directly in Gaming Mode.

Yes ai has been used, and this is a fork of the windows build that was released 2 days ago. Steam Deck mode has been added to this port to optimize for 30fps on Steam Deck with the potential for higher performance down the line.

I just think this is really cool, because I never thought we'd get these games running on Deck. No games have been confirmed as fully playable as of yet, but so far these are looking much better and more stable than the PS3 versions which the Deck could barely run at all.

Download or follow the progress here: https://github.com/spacepepperoni/uncharted_Linux

I struck thriftstore gold

I don't have a steam deck, but I'd like to own one in the future. Imagine my surprise when I found this case for $3.99. I had no idea it was limited edition when I picked it up and only available as part of a bundle. What do y'all think it is worth? I can't find listings for the case by itself to compare, just used bundles.

The only damage is one zipper pull is missing, and the other had teeth marks on the plastic. I think I'm just gonna use some orange paracord to make some diy zipper pulls that match.

I should have checked and seen if they had the steam deck somewhere. It completely slipped my mind. I was several hours from home and keep telling myself that it was likely put into the display case and scooped up immediately, so I didn't miss out by not looking.

I’m putting this up in the hopes that perhaps a decent person found it and checks. I was at gate B14. Boarding a United flight heading for Chicago Ohare. Totally tired and not paying attention. So annoyed with myself.

Although the pic shows Esoteric Ebb, I was playing Isaac at the time.

As of this Friday afternoon, they pushed out an update for a black screen issue for high refresh rate monitors but it also seemed to fix the stuttering issues. I'm running the game at 1080p and getting a very steady 60fps. Occasional dips but MUCH better. Default resolution should run a solid 60 with no dips

Out of curiosity, has anyone been playing Stalker 2 on their Steam Deck lately? I have the OLED TV, but I've heard it's only playable on low settings and runs at 30 FPS.

After purchasing every single handheld device, including the Xbox Ally X, Legion Go 2, and OneXPlayer 3, I can confidently tell you that the Steam Deck still provides a better overall experience than all of them. I sold my Deck OLED earlier this year; yes, I was being stupid, and now I am back after selling the OneXPlayer 3. These devices are great; however, I couldnt use them for the only thing I bought them for: gaming. I am here to tell you that the grass is always greener on the other side and the Steam Deck still rocks. Don't experience FOMO watching the X20 or anything else. Also I got the steam deck oled just for 300 bucks with dbrand Killswitch. Got really lucky

This is so damn annoying!

I was happy when Valve released the SteamOS feature of downloading updates while in stand by. I set it up to download everything "as soon as possible" and yet everytime I'm grabbing my Steam Deck, I have to update my damn games and some are even pending for "this week" rather than the upcoming night. It sucks. I want it to download updates while I sleep so I can play while I'm awake. Is there no way to achieve this?

Just got the latest update. I absolutely love the screensaver feature while downloading games.

With Steam adding custom screensavers to Gaming Mode, I had the idea of using animated artwork from my library while the system is idle.

Steam Animated Screensaver lets you pick games, choose animations from SteamGridDB and prepare them together. You can swap artwork, add a cover next to the title and keep the original framing or crop to 16:9 or 16:10.

It uses Steam’s built-in screensaver support. Once everything is installed, you can close the app and Steam handles playback. No Decky needed, and it works offline after downloading the artwork.

Setup happens in Desktop Mode. You’ll need your own free SteamGridDB API key, then you can prepare your games and install the screensaver. Back in Gaming Mode, select it under Settings → Customization → Screensavers.

I’ve mostly tested it on my Steam Machine and MacBook Air, so I’d love some feedback from Steam Deck LCD and OLED owners. The video was recorded on the MacBook Air.

The project is free and open source. If anyone wants to help, animation smoothness could use more work. Some SteamGridDB animations are already choppy, which becomes more noticeable at full screen.

GitHub and downloads

PS: the music of the clip is Song Of The Forge by Scott Buckley

hey all,

solo dev here. i've been making slots & skulls, a turn-based roguelite where your weapon is a slot machine and you build the symbol pool it can land on.

the deck has been my main test device since the very first build, so the controls, ui and text size were all made with it in mind, not patched in later. since it's turn-based you can put it down mid fight and pick it up later, which ended up fitting the deck really well. there's also an auto mode if you just want to watch a run play out.

the free demo is already up and will be part of steam next fest (oct 19-26). the full game releases on nov 4.

if you try it on your deck i'd really like to hear how it feels, especially anything about controls or readability. still have time to fix stuff before launch.

steam page: https://store.steampowered.com/app/4428910/

ANOTHER UPDATE (gasp):

It’s useable now. The board and wire are intact and after some “persuasive bending” the key cap now sits virtually flush and has only minor resistance when moving it. This will last me until I can order the new one and has donated his case to prevent further damage.

He’s ordered the part and has said I can pay him back once I’m back on my feet.

Again thank you to everyone. You’re all too kind and sweet. (The blubbering has been upgraded to trying not to cry)

Thank you

UPDATE:
A kind Glaswegian reached out and is taking it apart as I type this to assess the damage and see if he can get it partially useable until I can order a replacement. Hes letting me get it shipped to him and is going to message when it gets to his so I can nip round and get it replaced.

I want to truly thank EVERYONE here for all the amazing support, advice and kind words. It’s been overwhelming and I’m not afraid to admit I got blubbery seeing how many people care, truly unexpected.

Original text:
Currently staying in a homeless shelter and someone wasn’t happy with where I’d been assigned to sleep and threw my bag into the hallway hard causing this, it was loose in my bag as the case got stolen about 3 months ago (was using it to store hold hard drives and I guess someone thought the weight felt right) I really don’t know what to do or where to go. I don’t have a fixed address so I can’t send it to valve for repair. Anyone suggest anywhere / one local to Glasgow who can help out as other than my phone this is all I got.

Apologies if this doesn’t make a huge amount of sense but typing in a panic as I’m currently devastated

Edit: inputs from the stick are still registered, it just keeps getting stuck and I’m afraid it’ll break more.

Edit again:
Need to clarify I don’t have a fixed address as homeless so getting things shipped is very difficult at the moment.

Hi!

I've had a steamdeck oled 512gb for 2 years with no hardware modification.

I've noticed the battery draining by 1% per hour while on sleep mode without any game running. And I dont remember the battery draining that fast before.

I have the latest stable steamos update installed.

The battery is basically draining as fast in sleep mode as if I was having a game running (like Trails on the sky 2nd chapter that I play nowadays).

Does that sound ok to you ?

How can I check battery health? Do I need to recalibrate ?

Thanks for the help !

Hello all,
I’m running into an issue when trying to open EmuDeck app on desktop mode. It’s giving me this error…. Any help will be much appreciated!

Since I installed it, the steam deck doesn't heat up as much. GPU and CPU temp sometimes doesn't even reach 70° even when playing games like KCD2, The Witcher 3 Remastered, and The Blood of Dawnwalker. The image quality is also good and it generates more FPS than FSR 4.1. I'm so impressed tbh. Framegen keeps getting better and better.

New version of HelixSR 1.9.0 released today, gives about ~15% more performance than the previous 1.8.1 version. For those who don’t know what HelixSR is, it’s basically a port of DLSS 3.7 for the Deck, which provides a good upscaling quality, closer* to what FSR 4.1.1 brings to the table, at least from what I just tested, with the performance cost of FSR 3.1.

I'm in absolute awe. Those are in-game screenshots I just made using my Steam Deck OLED (no photo mode, no processing at all). I can finally say Cyberpunk 2077 is fully enjoyable on Steam Deck. Runs so good, ~40fps (80hz screen mode) like on Switch 2 but with way less ghosting and sharper.

I'm using Proton Cachy-OS latest and the amazing HelixSR Manager plugin for swapping FSR 3.1 with
DLSS 3.7 alongside OptiScaler. Yes, needs tweaking, but it's so stable it's unreal.

My in-game and OptiScaler settings are on the latest screenshots (in Spanish).

Give it a try!

EDIT:
Check the screenshots without the Reddit's compression here https://imgur.com/a/Zd5xZGg

Steamdeck will absolutely not load games ive tried hard restarts. I verified integrity of tool files, switched between beta and stable update channels. Stable and experimental compatibility tool. Ive also tried launching games from my desktop, and even when I try to go to a game and delete the Proton files it gives me no visual clue that anything happened. While running a diagnostic it says sniper runtime container is not installed but when I search for it, it is installed and it wont let me uninstall it. Its like the entire system is locked up.

Im just so tired of this thing at this point im just considering factory resetting it, but i would live to hear any suggestions on how to fix it.

OCD 256
Other games are working fine.
Guess it serves me right for messing with HelixSR.

Hi all, bought a steamdeck recently and up on the dpad was not working at all but the other buttons do. I’ve tried unplugging and replugging, cleaning the contacts with iso, as well as taking the plastic off and pushing hard on the rubber to input but alas, nothing. Anyways I just need to find the part at this point methinks. Thanks!