That tiny little thing went 5mi (each way) on 3000mah lion in intense winds.

im new to fpv drones and i was in my buddies garage flying my drone and the camera cut out mid flight and i cant figure out why it doesnt look like any of the wires are out of place or like anything is broken i attached some photos does anyone know what the issue could be and how to fix it? let me know if you need different or better photo the drone is a beta fpv air75ii

Can anyone tell me why I lost control? When making a turn, the FC is reporting the battery voltage is 10.9V. Battery is 120C URUAV Graphene 1050mAh with about 10 flights. Glad I recorded it because it was easy to find, one broken arm though (fixed).

I’m having a real hard time with my drone. I crashed it and am trying to replace one of my motors but even after soldering the motor on it won’t respond on beta flight. I’ve dealt with this before and usually I can just get them to all go online eventually but idk what to do. My soldering skills aren’t the best but it’s not terrible, at least I think so..

Hi all, I've made a purchase recently on hobbydrone.cz and received a 5% off for the next purchase. It's valid until the end of October and I am not going to use it. If you plan to order from them, drop me a message with your basket and have a 5% off from your purchase.

I am not sponsored by them, nor this is an advertisement. I just don't want the coupon to go in vain.

Pretty much what the title says I am trying to make a 1s fpv plane and I already see that I won't have enough uarts.

So I am exploring the option of getting a pwm receiver setting 2 channels to crsf and controlling it like a regular drone while some servos that don't need fc connections run from the receiver.

If you have any info on this or an other way to add extra uart/pwm outputs any advice is appreciated.

Getting more comfortable with gaps at the quarry behind my house.

I am thinking to buy long antenna for vtx
Currently using 120mm singularity
I feel like it is getting a shadowing issue and i am thinking of getting a more range-capable antenna as this offers 4dbi and 5dbi versions.

If there are other good options please let me know

Hey everyone, I've recently got back into FPV, starting with the Meteor75 Pro II, and I'm now planning a 3.5-inch freestyle build using a Volador frame.

I'm torn between the O4 Wide and O4 Pro. I recently picked up another Meteor75 Pro II for a bargain and was planning to take its O4 Wide for my build. My current Meteor's O4 Wide is also being inspected under warranty, so I may end up with a replacement.

I'm looking for unbiased opinions: is there any real advantage to the O4 Pro over the O4 Wide besides recording quality? I don't really care about onboard footage, so I'm mainly interested in flight performance, live feed quality, range and latency.

Is the O4 Pro actually worth the extra weight and cost?

First time ripping at this quarry behind my house. Flying a Seeker 5. It isn't smooth, but it was fun!

The quad of Theseus is complete. With new 6S-capable 1800KV motors installed, I can now put the previous 4S motors back on my old Naze32 quad (and probably retire it to be a display piece after a flight or two). I also took the chance to install the F722 flight controller I got for cheap, replacing the F405 I had in there previously. Now I can run 8k/8k loops and Dshot600.

I love how it flies, very torquey and fast with a good bit of weight to throw around. Tiny bit of bounceback on the pitch axis with the Supafly preset, I'll try giving it a little dynamic D.

Also I cannot find the serial number in order to raise a case at djis support pages. Any help appreciated😄😄

Haven't even flown the wing yet lol, was using it just to power while programming the FC and I was at it for hours without thinking. Got the 3S down to 4.5V uhg. At least it was only $12, a fairly inexpensive lesson.

I have a Pavo Pico II with 4 LIHV 450mah batteries. I was expecting at least 3.5mins of flight time but this is really poor and I was just hovering. When cruising im gettimg sub 2mins. I land at 3.4v per cell which goes back up to 3.5 or 3.6.

Is there any setting on beta flight that could be causing this? Its the default settings.

From my testing this seem like the battery/drone too heavy and there's not enough capacity?

All these batteries were purchased at same time. Drone is a is with o4 unit lite and default beta flight settings.

Any ideas? Cheers

After a few dozen days of use it stopped drawing the right amount of power from the charger, the charger connected to the plug always supplied 11 volts but a few days ago the toolkitrc showed me 5 volts, so I think it's a problem with the toolkitrc, can you help me?

Hi everyone,

I am currently repairing the Micro-USB area on my FrSky Taranis X9 Lite mainboard.

To make sure I do things right, I need to verify the exact specs/value of the SMD resistor labeled R114 (located right next to the USB port/D119 ESD chip).

Could someone who has an X9 Lite open (or a spare mainboard) please check:

1. The code/number printed on top of resistor R114 (e.g., 220, 330, 0, etc.)?
2. Or take a quick multimeter resistance reading across R114?

Here is a photo of the area on my board for reference.

Thanks a lot for your help!