I like to watch series and movies with headphones. And the built in Bluetooth on FireSticks or other devices just isn't great and or reliable.

What I've been doing is a 15 foot RCA to line in on my desktop PC and then using the Bluetooth on my desktop to use my Bluetooth headphones that way and the connection is stable but the audio always goes in and out of one ear and I have to keep adjusting the cable to fix it and it will work for a short while before it starts having issues again. And the audio quality isn't that great but it's not terrible.

I'm curious if there's a better way with better audio quality that would also cut out the hums and white noise of the RCA/line in method.

I think there's an optical output on my TV but not sure what'd I need for the desktop PC but I'm thinking that might be the way to go?

I was thinking of buying the Elgato Wave DX while it’s on sale, along with a Teyun Q12 audio interface to use with it. Would the sound quality be poor, or would there be any other issues? If I go this route and upgrade the interface later, would that be a good plan? I’ve also ordered a boom arm to keep the mic close by.

What ear pads do you recommend for my Audio-Technica M40x headphones?

I want to replace them because the ones they have are uncomfortable. I'd like some with more space inside (not so close to the driver), a larger ear hole, and softer, more comfortable materials. (If they add a more airy sound or a wider soundstage because of the extra space, that's great). I'd like them to not significantly affect the sound or the seal, and not leak too much sound. I searched, and Brainwavz and Dekoni don't ship to my country. I also looked on Amazon, but I couldn't find any models from those brands. I want to buy from Amazon Mexico because the other stores don't ship to my country, and I don't trust eBay, haha.

Hi, I plan to buy the Adam Audio T7V for my home audio setup and for this I also plan to buy a AV-Receiver and for this I cam here to ask which one you are using paired with your Adam Audio T7V?

Is there a way for the DX1 to simultaneously output both the USB input audio and optical input audio to my headphones? Or can it only use one at a time?

Hey, i'm thinking about connecting my wireless headphones to audio interface just to be cable free. i googled how to connect it to regular audio interface (in my case M-AUDIO AIR 192/6) and google gave me option with JCALLY ZU3 3.5mm Impedance Adapter 75 Ohm

Right now if i plug my jack 3,5 straight from m-audio interface to logitech wireless dongle it makes hissing sound, like a ground issues maybe? hard to tell what it's actually is but it's defo not quiet, i need to have music at like 50% and i still hear it slightly

i don't have much budget but seems like 5$ isn't bad choice for testing if it will make difference.

what i'm trying to achieve is having almost zero latency audio from audio interface with mic monitoring to my wireless headset, so no direct monitoring in windows or something like that, just pure audio for A to B

i don't reallly care about microphone in headset, it's very bad so i don't use it

what to do to achieve this, maybe some kind of mixing software? or this Impedance Adapter

I’m out of my depth, I have this RCA to aux cable, but the y means the two bits I need to plug in to the speakers are very close together, the speakers would have to be right next to each other. Can I get something with an extended Y - much longer so the speakers can be either side of a table? Or some kind of extender. Based in the UK, I know nothing about audio. Thanks!

I've been using a pair of Soundcore Life Q20+ headphones with the aux cord they came with for years now, and I'd like to keep using them for however many years it takes for them to start falling apart.

Small problem: New computer, no built-in headphone jack. Not a problem I'm familiar with as someone who has almost exclusively used laptops their whole life. I'm getting by using a DAC I had lying around, but I can't use the Q20+'s built-in microphone when using my DAC, so I was wondering if there were any relatively affordable aux cords or DACs or adapters that could plug into a USB-C port that can support my need for good audio output and microphone input?

Also if it's a new cord, I'd rather it be around the same length as my current one (~4 ft.) or longer.

Помогите пожалуйста, у меня проблемы со звуком на компьютере, подключен монитор через HDMI и колонки через джек, драйвера все поустановлены, но звука так и так нету, хотя в настройках в списке все имеется.Все перепробовал из ютуба и тд.

На самом деле эта была проблема была и изначально но тогда не хотел решать поэтому воткнул ЮСБ переходник и все пошло как надо. Джек от колонки подключал и сзади и спереди корпуса толка нету, но как бы колонки реагируют на пк когда включаешь и тд.

Благодарю

Hello!

I recently got a pair of somewhat vintage speakers (I'll be honest, mainly for aesthetic reasons) and would like to hook them up to my TV, if that's possible. I figured I probably need an amplifier for that. I've attached pictures of the ports my TV has available and the plugs the speakers have. Each one has two, and I think in english they are called banana plugs?

I'd like to use them with my TV and also be able to connect to the amplifier with my phone via bluetooth to play music through them that way. How do I find out which amplifier can do those things? I have absolutely no idea about this topic. I'm not an audiophile, so it doesn't need to be any high-end stuff, just something of decent quality that can make my setup work.

Thanks!

EDIT: TV is a 2020 Samsung Smart TV, Speakers are Grundig Box RB 400, they say 4 OHM, 65 Watts and 35 Watts on the Bottom, I didnt see the sticker at first.

mi audífono no carga parece estar muerto ya revise los pines y se ven bien y ya los limpie pero nada que puedo hacer