r/CAguns • • Oct 24 '25

Legal Question CA 2025 New Gun Law Practical Overview

303 Upvotes

Update 1/1/2026: CA DOJ did sent out a bulletin on DES regarding AB-1263 & SB-704 on 12/24/2025. It can be found in this thread (thanks /u/norcal_firearm ). Unfortunately, the document provided virtually zero guidance.

There's also a list maintained by the community for sellers shipping to California in compliance with AB-1263 & SB-704. That list can be found in this thread (thanks /u/TMRD0 )

It remains to be seen if we'll see regulations or further guidance from CA DOJ regarding the new laws this year.


Update 11/29/2025: CRPA has published their Info Bulletin/Guide for Firearm Industry Members concerning AB-1263 as of 11/26/2025. Most of it is the same but a little more detailed on certain parts than my guide and written towards a vendor audience. I'll likely make some updates to my guide; of interest is they include all magazines being affected by AB-1263 because they're mentioned in CA PC 30515, and on a second reading I agree. Right now I'm in my busy time so I haven't done updates yet. Thanks for the callout by /u/cornstrategy !

I was also in the process of doing my own vendor guide... I'll see if I have time to work on that soon. In particular I wanted to discuss using local vendors as pass throughs for California Firearm Accessory (as defined) sales, if they're willing.


Welcome to the CA 2025 New Gun Law Practical Overview

The purpose of this thread is to go over the changes in the law as a result of the new gun bills signed into law in 2025; particularly those related to purchasing. Most of this information I've said in multiple threads and replies. I will probably do some separate threads discussing particular laws in detail as I have time, and link them back here. But for now, I present the pertinent information. It would likely make a wonderful pin on top of the sub for a while, if the mods want to do the needful.

Disclaimer: I Am Not A Lawyer (IANAL). I’m especially not your lawyer. This is not legal advice, but kinda like, my opinion man, on the new gun laws that were passed this year. I do my best to read them, interpret them, and provide a summary. All for the price of free.

Further, this is written for a general audience, not an audience for those with special credentials like LEOs or Firearm Dealers, who may have different exemptions or concerns not mentioned here. Feel free to ask in the comments though.

Anyhow, most people in /r/caguns are focused on the purchase and acquisition of more guns, ammo, and accessories, for better or worse! Therefore, this summary will focus on purchase information and deadlines when these laws go into effect, and how that will affect your ability to purchase.


Glock and Glock Clone Sales Ban

Starting 7/1/2026, AB-1127 prohibits Firearms Dealers from selling a “machine-convertable pistol” at retail (unless they had it in inventory before 1/1/2026). This sales ban does not apply to private party transfers, or LEOs (of course).

What is a “machinegun convertible pistol”? Short Answer: Various Glocks or Glock Clones (with a “cruciform trigger bar”) that may be fitted with a “Glock Switch”, an illegal device that mounts on the backplate converting the firearm to automatic fire. See this thread where /u/Traditional-Tune1755 put together a list of makes & models on the CA Handgun Roster likely affected by the sales ban.

At the time of this posting, Glock has notified industry members they plan to discontinue various models (especially models on the CA Handgun Roster) that are Glock Switch compatible, and release new models. It remains to be seen whether these new models meet the requirements of the bill to be added back on the roster. AB-1127 specifically authorizes CA DOJ to write regulations regarding the sales ban.


Firearm Barrels

Starting 1/1/2026, SB-704 requires that individuals will no longer be able to transfer or purchase a Firearm Barrel (including blanks) unless the transaction is completed in person through a Firearm Dealer. Further, AB-1263 requires that Firearm Dealers provide a notice with firearm law information with firearm barrel purchase, and requires the purchaser to provide proof of age and identity confirming the purchaser is at least 18 years of age. This means you shouldn’t expect to legally order firearm barrels delivered to your house starting 1/1/2026.

Further, SB-704 prohibits those under the age of 18 and those prohibited from possessing a firearm from purchasing firearm barrels. The law also prohibits firearm barrel possession with the “intent to sell or offer to sell” in violation of SB-704.

Starting 7/1/2027, SB-704 will require Firearm Dealers to record purchaser information and conduct an eligibility check. This check would be $5 per transfer, which could increase up to $1 every year. Based on how it’s written, I suspect it will be a check similar to an Ammo Eligibility Check.

There is no general FFL03 + COE exemption.

All of this is subject to regulation written by CA DOJ, which I imagine will likely be published in late December or early January as Emergency Regulations. SB-704 specifically authorizes CA DOJ to write regulations.


Firearm Accessories

Starting 1/1/2026, AB-1263 requires “Firearm Industry Members” to have purchasers of “Firearm Accessories” provide proof of age and identity confirming the purchaser is at least 18 years of age. Additionally, Firearm Industry Members must provide the purchaser a notice with firearm law information. Further, when shipping a Firearm Accessory to a purchaser, a Firearm Industry Member must ensure the package is labeled “Signature and proof of identification of person aged 18 years or older required for delivery.”, that the shipping instructions list an address that matches the purchaser’s identification, and to require the purchaser to present proof of adult identification to the courier and sign for the package when it’s delivered.

What is a “Firearm Industry Member”?

a person, firm, corporation, company, partnership, society, joint stock company, or any other entity or association engaged in the manufacture, distribution, importation, marketing, wholesale sale, or retail sale of firearm-related products.

What is a “Firearm Accessory”? I think it’s best to break this down into three parts, the first two which I’ve talked about extensively in the past.

any other attachment or device described in subdivision (a) of Section 30515 of the Penal Code that may render a firearm an assault weapon when inserted into, affixed onto, or used in conjunction with a firearm

This is definitely: Pistol Grips, Thumbhole Stocks, Folding or Telescoping Stocks, Grenade Launchers or Flare Launchers, Flash Suppressors, Forward Pistol Grips, Threaded handgun barrels, second handgun handgrips, handgun shrouds, folding/telescoping shotgun stocks, and any other accessories from CA PC 30515.

an attachment or device designed or adapted to be inserted into, affixed onto, or used in conjunction with a firearm that is designed, intended, or functions to increase a firearm’s rate of fire or to increase the speed at which a person may reload a firearm or replace the magazine

This is vague. It’s unclear, other than there’s already CA law prohibiting stuff like bump stocks or binary triggers. It could be: Fixed Magazine compliance devices like AR MAGLOCK, kingpin, CompMag, etc. Might also be things like speedloaders and MA Loader.

The term firearm accessory also includes any other device, tool, kit, part, or parts set that is clearly designed and intended for use in manufacturing firearms.

The last part I haven’t really talked about. I honestly couldn’t tell you what it means. It is so vague, so encompassing that it could be any firearm part, accessory, or tool. AB-1263 is supposed to be related to ghost guns and illegal manufacture of firearms, so… do I think this would apply to optics? I don’t think of an optic as part of manufacturing a firearm. Could a ¼-28 x 1” Socket Head Hex Screw used in an AR-15 pistol grip be considered a Firearm Accessory? Maybe! I would hope it is interpreted narrowly to maybe only target, I don’t know, gun jigs or something. There’s not a clear limiting principle, so it’s hard to say exactly what falls into this. This is me saying I have no clear advice regarding this part of the definition other than to say we’ll only know what it means once CA DOJ publishes regulations. I believe that if the CA DOJ tries to apply this really broadly though, they’ll have issues coming up with a consistent limiting principle.

All of this is to say: Even if we get a clearer idea as to what parts/tools/etc. this applies to from CA DOJ, many part sellers will likely stop shipping those regulated parts to California.

There is no FFL03 + COE exemption.

All of this is subject to regulation written by CA DOJ, which I imagine will likely be published in late December or early January as Emergency Regulations. AB-1263 doesn't specifically authorize CA DOJ to write regulations, but I imagine they will anyway.


3 in 30

Currently, there’s a statute on the books commonly known as “1 in 30”. This is found under CA PC 27535, generally limiting people from purchasing more than one firearm (or completed frames/receivers, or firearm precursor parts) within any 30-day period. FFL03 + COE holders are exempt.

However, as a result Ngyuen v. Bonta, the 9th Circuit overturned this statute, the state stopped appealing, and the mandate was issued putting the judgement into effect on 8-14-2025. Therefore, “1 in 30” is no longer in effect.

Starting 4/1/2026, AB-1078 will limit people from purchasing more than three firearms (or complete frames/receivers, or firearm precursor parts) within any 30-day period. FFL03 + COE holders are exempt.

Of course a legislator had to just bump it up a bit to 3 guns in 30 days and call it a day. This law is almost certainly unconstitutional as well, given the opinion in Ngyuen v. Bonta. While most of us are hopeful that we’ll therefore be able to easily secure a preliminary injunction preventing this law from going into effect, it’s the 9th Circuit, so who knows.


Clearing up some confusion

“But wait!” you might say “I heard the whole Gun Barrel Background Check bill doesn’t go into effect until 7/1/2027!”. My eye twitches, my blood pressure increases; not because of you of course.

Why yes, that’s been said a lot on Youtube. I could link almost every guntuber that has talked about SB-704 and they either say the whole bill goes into effect on 7/1/2027 (which is wrong), or they only talk about the Barrel Background Check provision of that bill going into effect on 7/1/2027, which is technically true but also not very helpful. I can only guess that they read the summary of the bill, or they only saw one date in the whole bill and assumed the whole bill was going to go into effect on that date.

I’m not going to get into operative vs effective dates (terms I use interchangeably and incorrectly), and there’s a good article on that here. By default, per Article IV Section 8(c)(1) of the California Constitution, most bills signed into law go into effect January 1st of next year. However, legislators can write their bills so that they become operative at a later date. When legislators write those later dates though, they only apply to the provision of the bill that they say it does. So now we get to SB-704, specifically section 33700… we’re just going to talk about (a)(1) and (a)(2) here:

(a) (1) A firearm barrel, as defined in Section 16525, shall not be sold or transferred unless that transaction is completed in person by a firearms dealer licensed pursuant to Sections 26700 to 26915, inclusive.

(2) Commencing July 1, 2027, a firearm barrel, as defined in Section 16525, shall not be sold or transferred unless that transaction is completed in person by a firearms dealer licensed pursuant to Sections 26700 to 26915, inclusive, and the licensed firearms dealer has conducted an eligibility check to determine if that the person is authorized to purchase a firearm barrel under subdivision (b) in a manner prescribed by the Department of Justice.

Do you notice how (a)(1) doesn’t have a date, while (a)(2) does? How when (a)(2) talks about that date, it just says “Commencing” followed by the rest of the statute? That means that (a)(2) becomes operative on 7/1/2027, while (a)(1) becomes operative on the default date, which would be 1/1/2026. If you read the whole bill, you’ll see that the only provisions that talk about 2027 are related to the background check specifically.

Another user in this sub ended up calling up SB-704’s author’s office and speaking to their legislative director to confirm that indeed the bill has multiple operative dates as discussed above (Thanks /u/AccordingIy !).

The only guntuber I’m aware of who put out the correct information was Reno May. Remember: I’m not your lawyer, but Reno May is.

The other thing people ask is “Wait, I thought AB-1263 was about 3D printer code or something. What’s this about restrictions on gun parts?”

The answer is AB-1263 is about a lot of things, as I discussed in my analysis months ago (which is still generally true).

I don’t know why they don’t talk about the part of AB-1263 that effectively restricts shipping of a bunch of gun parts. It’s a complicated bill, but it’s something that people need to be aware of since it will affect firearm consumers and sellers directly.


Hopefully y'all found this helpful. Feel free to post any questions. If you think I got anything wrong, point it out.


r/CAguns • • Feb 03 '26

Politics SB-948: FSCs would require 8 hours of training, including 1 hour live fire training; also required for those moving to CA with firearms.

238 Upvotes

Update 5/19/2026: Latest legislative update for this bill can be found here.


Hello all. Still without my computer so less fancy formatting.

Bill text: https://leginfo.legislature.ca.gov/faces/billNavClient.xhtml?bill_id=202520260SB948

SB-948 by author: Senator Jesse Arreguín.

This bill has two components:

1.) This bill would mandate starting January 1st 2027 that those who move to California with firearms (known as Personal Firearm Importers), in addition to the current requirement of registering their firearms within 60 days of moving to California, must also obtain a Firearm Safety Certificate (FSC) and submit it with their firearm registration.

2.) This bill would mandate starting July 1st 2028 that to apply for a Firearm Safety Certificate, which one must obtain to purchase a firearm in California, that one must complete a training course of no less than 8 hours, which includes at least 1 hour of live shooting instruction.

Here's the bill as it would amend the current law: https://leginfo.legislature.ca.gov/faces/billCompareClient.xhtml?bill_id=202520260SB948&showamends=false

Naturally the bill does not say how much such a course would cost, and you would likely be expected to pay for it. It does mention that the legislature can use DROS funds to pay for implementation costs and ongoing expenses for this program, which of course would probably increase DROS fees if they did.

This is essentially a reintroduction of AB-1187 from Assembly Member Celeste Rodriguez from last year: https://leginfo.legislature.ca.gov/faces/billTextClient.xhtml?bill_id=202520260AB1187

Edit: As an additional argument against this bill, I want to point out that if you're a new prospective gun owner, you would have to do this training, which includes live fire. Live fire training with... what gun? You don't own a gun yet, so you'd have to rent a gun in addition to purchasing rounds at the range the live fire training is at, thus increasing the costs of training for new gun owners purchasing their first firearm even more.


r/CAguns • • 11h ago

Dry firing

152 Upvotes

You guys I just dry fired in my bedroom after my kids went to sleep for the first time ever and I was so scared to pull the trigger 🤣🤣 I checked that the gun was clear probably 20 times before I finally built up enough confidence to aim at my bedroom wall and actually pull the trigger.

I’m a mom and new to shooting. Just wanted to share a win. 30 minutes of dry fire tonight completed, here’s to many more.


r/CAguns • • 14h ago

It's home

Post image
113 Upvotes

I'm using a Springer Precision filler plate and it worked perfectly with the LCI.

For anyone who successfully removed the slide, did you have to hammer that slide catch out from the other side? The new design doesn't come with a punch and is pretty stiff

Overall, fit and finish is excellent and there's virtually no wobble or rattle in the slide to frame

Magazines go flying out when the release is pressed so no issues with the mag disconnect aside from existing. I'm holding until more info comes out on how to remove and not cause the trigger to float around. We may need someone to make a filler plug or 3D print one

Can't test this until the weekend so I'm not sure how I'm going to sleep for the next few days

Happy almost 50th bday to me


r/CAguns • • 10h ago

Gun Pics Vortex Defender ST Enclosed

26 Upvotes

Am I trippin or is this thing moving?


r/CAguns • • 21h ago

Look What The Cat Dragged In👀😮‍💨Newest Addition 🔥

Thumbnail
gallery
136 Upvotes

r/CAguns • • 15h ago

Event I wouldn't normally do this, but I'd be wary about attending SOME events at Ojai Valley Gun Club

52 Upvotes

These guys are trying to open up to the public a little more and hold some events that people want to go shoot, and they hold an Action Pistol and Action Rifle match that anyone can go shoot for $20. Alright I'll bite, and I had just enough time to cruise up there on Sunday to check the Action Pistol out. Pay my $20, sign the waiver and put my name on a scoresheet. Read to the end, because there's some clarifications.

When I first showed up there were 2-3 very welcoming people already there doing a little pre-match shooting just to mess around. Alright cool, I shake hands and join in. Immediately I notice that 2 of these people are talking experience, however aren't acting it, and there's a little questionable firearms handling however nothing that I'd say anything about, just kind of one of those things that makes you think "I'm going to keep my eyes on what's happening here".

Everyone shows up, I help move all the steel targets out of a conex box and onto the target line. We set up 4 stages consisting of 20 impacts needed to complete each. Not a whole lot of "action" in these stages, however it's also been quite awhile since I've been the youngest person at a match so whatever at this point it'll be an easy day and I'll go home early.

Then the event started with the VP of the club directing. What this turned out to be can kind of be described as a mix of Action Pistol and Steel Challenge, however it's from the perspective of a Cowboy Action shooter. So there were some terms used by the MD that weren't super clear to us and needed a little clarification. At the brief for stage 1 (all shooters, all 7 of us, would complete each stage before moving to the next) we (myself and one other new shooter, who I knew from Piru) were informed that under the "make ready" command, a loaded magazine would be inserted into the gun however the gun was not to be chambered. In so many words, he explained that instead of encouraging and educating their population up to a very normal level of firearms handling, instead they chose to alter a very standard thing to cater to the lowest common denominator. At this point I'm starting to understand what I got into. All mags, regardless of capacity, are to be loaded to a maximum of 10 rounds and I didn't really put up much of a fight on this because it was clear it wouldn't really matter regardless of what the law actually says.

Shooting started one shooter at a time which wasn't a huge deal because there were only 4 short stages to go through, and I was 3rd on the list. Almost immediately I saw things that would have gotten anyone a minimum of a stern warning or likely DQ'ed at any actual match, namely pretty poor trigger control. There weren't really any opportunities to break the 180 although I'm sure someone did during a reload but I wasn't going to stay close enough to find out. How nobody ND'ed during this match I have no idea, it was fingers on triggers through reloads the whole time. nylon holsters, IWB holster sucked in tight on a belt just kind of wrapped around all clothing, myself and the one other Piru shooter just kind of looked at each other like "what is going on here"? One shooter would for some reason not immediately reholster and start chatting with everyone dangling a gun in their hands until they decided it was time to reholster, and then it was one of those "support the holster for some reason with the left hand while they point a gun at their own hand to reinsert it" actions.

In the end the score you get is just total time because you can put as much ammo downrange as you need to in order to complete the stage and all targets are steel. My overall time was 76 seconds. The guy I knew from Piru was having a noticeably slow day, and got 126 seconds. The next fastest was 180 seconds and the worst overall was over 600 seconds (but this person arguably did the most shooting for their money).

Best part is that a few years back at my local multigun match, there was a guy who would come up from Ojai and bring his absolutely terrible firearms handling and fudd stories about how his Mini14 was the only one on the whole planet that was better than an AR and how we were the dumb ones for suggesting that unjacketed lead bullets were acceptable in Glock barrels, and we gave him 1,2,3 tries and he was sent home and by his own decisions never did come back. Well guess who shows up to the Ojai match late so he didn't have to set up and left early so he didn't have to help tear down? Go figure his weapons safety hasn't gotten any better since I saw him last.

NOW, I want to be clear that for all I know this is a standup club overall, and they're supervised, safe, and welcoming (from my experience they were absolutely welcoming. Very nice bunch). However given this single time I attended this event, I wouldn't go do it again OR shoot the "action rifle" match directed by the same guy. THAT SAID there's another event that's going to run on their 600yd bay called "Action Rifle Long Range" and I confirmed today that it's being run by a different guy and after chatting with him I do feel interested enough to maybe give that one a shot. But if you're looking to dip toes in competition and see these come across your plate, personally I'd sit that one out, and this is coming from someone who's constantly on here urging people to compete.


r/CAguns • • 13h ago

Gun Pics First Ar-15 Build (ca legal)

Thumbnail gallery
18 Upvotes

r/CAguns • • 15h ago

BLM Land Shooting

23 Upvotes

What's the protocol? Other than finding an area that permits shooting/hunting per the BLM website - I just walk in and shoot? Anything I need to check in with first? With it open to public shooting - what are my safety precautions? I just hope someone isn't shooting towards me etc?

I'm in San Joaquin Co. and I see there's a place by Cache Creek. Any recommendations or suggestions?


r/CAguns • • 16h ago

CCW LASD CCW dashboard update: 11,967 applications received; 1,153 open

Thumbnail
lasd.org
18 Upvotes

r/CAguns • • 1d ago

I’m so tired from working

81 Upvotes

But I need money to buy guns 😩😩😩😩😩


r/CAguns • • 11h ago

Desert eagle question

Thumbnail
gallery
7 Upvotes

This is my friends gun and hes having issues with his desert eagle so posting on his behalf. The gun wont cycle properly and gets stuck. Beass fails to eject resulting in a double feed. Anyone run into the same issue? Any suggestions or solutions on this? What can he do to fix it? Said it cycles fine with hand/function test


r/CAguns • • 22h ago

Politics It's time to vote!

45 Upvotes

As an SF CCW holder, I can say firsthand that policies can change. It's not easy, but the least we could do is vote for those that are willing to put in the effort (or at the very least, not as bad as what we currently have).

I know it can feel hopeless and apathetic, but we win little by little. Don't surrender!


r/CAguns • • 12h ago

P211 GT5 optic plate

Thumbnail
gallery
5 Upvotes

Posting here incase someone is still looking for an optic/plate set up. Initially, I started with a defender xl which directly mounts and uses the provided recoil lugs. It was alright but having to wipe blowback carbon after every mag was annoying.

So, I switched to a 507comp and calculated kinetic plate setup. The issue here is shown below. When the gun is unloaded the plate sits flush, but when it is loaded the plate is lifted up by the darn Lci. You can remove the lci but that will leave you a gap which means more carbon blowback.

The fix: springer precision’s optic plate. A guy from here did confirm it fits better and allows the lci to function as intended.

If anyone else got a better plate suggestion for a 507comp please drop it below. 🤙🏽


r/CAguns • • 22h ago

Route 66 Solo Question

Post image
31 Upvotes

Pic for attention. Looking to check out the Route 66 range for the first time. What’s the best way to go about a private bay solo? I see I can reserve online but would need to pay the whole party fee (which is fine if that’s how I have to do it) or do they adjust pricing in person if they aren’t busy? I only have weekdays free so that’s when I’ll be going. I’m thinking of swinging by today to check out the steel gallery and was debating on bringing my rifle depending on the private bay situation.


r/CAguns • • 8h ago

Flared Magwell for Echelon?

2 Upvotes

Looking for a flared magwell for my 4.5f comp that will work with the standard size 10 round mags. Any suggestions?


r/CAguns • • 12h ago

Optic recommendations for a Winchester 1894 30-30?

3 Upvotes

I recently aquired a Winchester 94 Ranger (angle eject model from the 80s) and I've been wanting to put some glass on it for deer hunting purposes. I'm currently looking for good optic mounts, I've seen people put picatinny rails on them but IMHO it looks really ugly with them, and I have something to say about 21st century variations of lever guns but that isnt relevent at the moment lol

That being said, I'm looking at mounted scope rings and I'm not really sure what sort of scope to attach on it. I'm not looking for anything crazy, I'm running .30-30 and I don't plan on shooting anything over 150 yards. I'd want something that complements the size and frame of my rifle (so nothing too big), and brings bang to your buck. Any recs for a decent scope?


r/CAguns • • 20h ago

Gun Pics Glocktober

Post image
14 Upvotes

Currently what i shoot with. Featuring the last Glock sold at bass pro shops Rancho Cucamonga 12/29/25


r/CAguns • • 21h ago

RG SSE

14 Upvotes

Sold out in 30 minutes - savages! LOL


r/CAguns • • 1d ago

SR180M

Thumbnail
gallery
98 Upvotes

When I posted up the pic of the shotgun, my DMs got flooded with what's in the back.

Been working with @potbatindustries on IG to make an Homage to the SR3M using a Brownells BRN180.

He made me the handguard, VSS 1913 stock adapter, pistol grip/fin, Middleton selector upgrade, and AK style charging handle.

Absolutely fell in love with this thing and can't wait to get it home to LA.

And yes, that is an extended Blast Cage with a comp inside that makes it 16 inch barrel with an OAL of 35 inches.

Anyway, he says he's already working on improvements on it and will be releasing a kit or individual parts for pre-order next month


r/CAguns • • 1d ago

New gun day

Post image
212 Upvotes

r/CAguns • • 1d ago

Gun Pics 2k11 Pro Comp fresh out the slammer

Thumbnail
gallery
95 Upvotes

Feels good in hands. Time to break this baby in!


r/CAguns • • 1d ago

MARS-H and his little brother MARS-L

Post image
88 Upvotes

MARS-L has been in my safe for a bit, while MARS-H just got out of jail yesterday. Both rifles run like machines. If you’re on the fence about buying an LMT rifle, don’t overthink it—just do it!


r/CAguns • • 1d ago

Fresh out of jail Shield X.

Post image
39 Upvotes

FYI sear housing pin is a pain in the ass to take out.


r/CAguns • • 1d ago

Gun Pics How much am I missing out on 2011s - specifically 2k11s?

Post image
98 Upvotes

I’m an amateur shooter. Don’t compete. Just enjoy getting out 6-8x / year to shoot. I’ve been enjoying my p229 Elite with the SRT trigger and I’ve got an optic cut slide coming for it. It feels super solid and nice compared to my poly guns. That said, I’ve had the itch to pick up a 2k11 since they hit the roster. $3k after taxes also buys a lot of 9mm to practice with. How much am I missing out on by skipping the 2011 craze?