So this is my first flywheeler build and it was pretty challenging. There was a lot of first for this build but the build guide helps a lot. Besides the challenge of building one, it’s a super fun blaster and haven’t seen many so I thought I would make one for an event. This has OOD reaper flywheels and lokis motors. I haven’t tested it super hard since I only have a 2s lips but it’s pretty fun to use. Currently hit 120fps but I think the with a 3s and the current setup I have it do 160fps. Would recommend it your up for a challenge of your skills and patience.

I have a nerf rival hades I got years ago, and I recently took it out again to do some plinking, but I find it accuracy to be quite subpar. Are there any accuracy mods/upgrades available for it? Or do I need to DIY something?

I had to do it... Was having waaaaaay too much fun with the OG blaster...Every one i showed the standard one too kept sayin it was total over kill :) and i kept thinkin naaaaaaa. It can be bigger... Only an extra 40mm overall but this is a super easy 245fps pull prime and i think i can tweak it a lil more. With the extra spring load ive added a TPU plunger head to soften the blow a bit. Runs a 330mm worker barrel and a cut down k25 type spring with Ashtons personal specs.

Bruce’s lever action Triton, was consistently getting 155-175, depending on what kind of dart, and highest for the day was 183. Wasn’t number chasing tight, not sure the lever will appreciate it, but we’ll see…

(All designs are proprietary designs to be used with Zuru dart blasters and cannot be used in any other application.)

Taking a small step back from my sledgefire project to work on something a little bit easier. Uses all the original hardware from the stock grip including the internal roller. The shape is a product of size limitations, but I'm pretty happy with how it came out.

Once again, thanks for taking the time to check out my builds.

I got to be a coach for Beef Squad at the most recent Ragnarocktoberfest. While I didn't get to play in any comp myself, I got a lot of exposure to competition-spec blasters, and coupled with the problems and lessons learned from my previous attempt at a blaster in this niche, I've started work on this.

• single stage HyCon geometry, mounted on aluminum plating for stability
• compact form factor for playing tucked into cover
• large battery compartment: 110x40x35mm (I might make a remote line version that removes everything behind the pistol grip)
• aluminum flat construction to increase rigidity and reduce footprint

ok so I had this dumb idea to like mod a magnus into a lever action but well, the closest thing I've done with it is is like the lever itself works but it requires me to like push it up to prime, and that feels like that I'm probably going to end up breaking it..... so what should I do? I feel like maybe it's like an issue with like where I decided the screw on the slide is in in the wrong way or what, is what I'm thinking of making possible with like how it currently is right now (only got the bolt on the slide on like one side)

The big beast came with a mostly working battery and a charger. Customizing the S76 a bit.

I just realized my nerf retaliator had a orange stock cap rather than a grey one so just asking [EDIT!!! ] since the stock cap doesn't look like it fits properly I think the last user swapped something here. ... Also thrifted this so thank y'all for your answers! And also it is European

(all the designs shown are solely intended for use with Nerf dart blasters and cannot be used elsewhere.)

After a couple days of designing and printing it's finally put together. The right half is the V2 and the left half is the V3 so they look a little bit different but not really. The V3 just matches the profile of the body a little bit better. Fits like a charm, charges the plunger tube perfectly. Just have to sort out some issues with the shell ejector binding(probably going to throw a chamfer on the faces of the pen to help with travel), and need to sand down the barrel interior a tiny bit where the dart exits.

Once I get the air restrictor modified to be able to interface with this correctly, hopefully I'll be able to post a video of it working.

Thank you everyone for the support on this build, this is my largest 3D printed/Nerf project to date.

I found this Defibrillator megaXL blaster on printables and wanted to do a lil remix on it. I use 70mm long megaXL darts and they work nicely. You just have to push them down the barrel past the bearings. l plan on uploading the files later tonight if anyone is interested.

The blacked out blasters on the box?

I got this at goodwill recently and idk if it’s just me, but the flywheels sound off to me. It sounds kinda crunchy, like they’re grinding on something, if that makes any sense. It’s also shooting in the 50-55 fps range according to my chronobarrel. I opened it up and didn’t see any obvious debris or anything in the motors. Is this normal or is something wrong?

Yea yea I know, N1. But BNIB with select fire + attachments?? Is this not a steal? In CAD so like $14 USD

How do I fix this? Nerf fortnite basr-l

edit: prime is stuck like that.

Suppose for a minute you got it in your head to make a newly printed pistol into a pump-action, complete with a shoulder stock. How would you prefer to handle that? 1) Design one from scratch, or 2) make an attachment point for people to use their own?

Another lucky week! The Stryfe and Xshot were half off. I've been sitting on the stock and firefly clip for a Votex for awhile, so was super excited for the setup. All under $10 each this week

allegedly $14 according to an american leak site with no image

Handguard designed by me in cad and printed it in PETG, and all M-LOK and pic rail are to correct scale. The stock is milspec printed in clear PETG designed by Levi_175414 on Printables: Link. I plan to get some extra parts for it like a longer barrel and a charging handle.

Any thoughts, opinions, or recommendations?

I have a xshot menace but find the grip too small. I work from home and shoot a target down the hall from my computer chair. I have a number of blasters but use my menace the most at home because I can sit there with a bin of darts and can just load one after the other. Is there a single dart blaster with a larger grip that is compatible with half length darts? I dont have access to a 3D printer so needs to be stock. Thanks for your help!

Hey all, I just finished doing a repaint on a Nexus Pro X2.

I’m running into an issue where the slam fire will engage at the end of the forward priming motion (without squeezing the trigger). This happens with every other prime.

I believe everything is seated correctly. Has anyone come across this issue and have any recommendations? I’ve put several NPX 2’s back together and have not come across this before.

Thanks in advance!