Glock 19X, PMM threaded barrel with a Silencerco Omega 9K. ALG 6s mount with an Aimpoint T1 and surefire x300V.

Ruger 22/45 Tactical with a Silencerco Sparrow, X300V, Lobo RMR mount and Trijicon RMR.

Have fun and be safe out there!

This is the long lost 22lr that probably made it into the family in the 1950s. My uncle recently found it hidden inside the wall of one of our hunting shacks. For an american I assume the closest thing is a deer stand. Basically a hut high in the air that is supported by metal or wood posts. Anyways, this once belonged to my grandpa and he was the one to hide it and eventually forget about where he put it. We have also just registered it to our names.

It was originally used in our family to put down pigs when needed. However one extremely interesting thing is that if u look close enough u can see a magazine type thing under the gun + its cut stock. Let me remind u that this is a toz-8 and those were only made as 1 shot rifles. That magazine is 100% handmade, made from 3 different piece of brass it was made as an internal magazine which wasn't supposed to come out. The gun barrel has been cut at the bottom and another metal piece that has been precisely machined to feed from the magazine. It is extremely well done and if u know anything about guns then hand making a magazine that actually feeds is not easy at all. At some point the magazine was blocked off because it probably stopped working or wasn't needed anymore. We suspect this gun once belonged to the forest brothers that mostly were around after the war in and in the 50s and thats why these changes were made to it.

Ive took on the task to fully restore it. Its in pretty good shape, only surface rust and thankfully the bolt is rust free as I cannot figure out how one would come apart. ​As of now ive fully restored the rear sight with new springs and bluing. Also blued the trigger guard and trigger base plate. Mostly have been thinking what I will do with the surface rust and how to clean it. Rust has gotten inside of the rear sights base and thats tricky to get off. Might need to soak the gun in rust removal to get to that. Then will polish the whole gun and apply a new layer of bluing. Will make a new stock for it aswell.

2 ftf within the first 100 rounds, 1 fte at around 350, besides that she ran smooth like room temp butter!

I've been on the hunt for 15 years for this gun! I can't contain my excitement!

Not only did I get one, but two! Both were a blast to shoot so far.

2x IMI JERHICO 941 R. The nicer early 0035xx serial had the .41AE conversion with it as well.

Looking for coil spring, sight and magazine recommendations. preferably oem of stuff

Serial number is the same 003500 as spikes gun from cowboy bebop!!

Might make one of them a Spike clone so could use some leads there as well.

Repost as other was closed, hope I fixed it.

My beautiful Beretta 84BB Italian police trade in, Opinel No. 9, old ass Briar wood pipe, and full art reverse holo Skarmory

For bedside, in the safe, for how many guns, etc

I keep one hp in each with my bedside & carry pistol, all fmjs in spare magazines and ar magazines. It seems minimal but hollow points seemed expensive and I needed range ammo

The price of ammo is crazy these days. There was a time that a range day would cost what lunch at McDonalds cost. Not anymore. I'm curious how everyone/anyone trains now? I personally can't afford $70 range days every weekend,and that only gets me 4 x mags in an AR. Throw in a sidearm and it's more like $110 each time. Now,I've gotten both my daughters into it and that just triples the cost. How do you all do it? Mix in dry fire range time? I'm truly interested in how to get the best out of what I can afford.

I’ll complicate that more with I’m not a veteran. So I don’t have the tactical knowledge. I value training, but it’s gotten to where I can afford a class and a few range days a year or range time and no training. This isn’t to say the trainers are overcharging. Just that the dollar no longer stretches and I’m trying to find the right balance. Again, my costs are now threefold. Any thoughts or suggestions?

PSA was advertising late model (aluminum frames) P38s. I bought one and received it today. The slide catch spring had jumped the slot but other than that, It's in pretty good shape. I snapped the catch spring back in the slot and it runs like a Swiss clock.

Hello everyone! Been on the fence about the PDP and Echelon for a couple months now. It wasn’t until a couple days ago I saw the Echelon PRO that kinda made me lean towards it. I currently own 3 handguns 1 of which is my EDC (M&P 2.0 carry comp) and is my only striker fired pistol. I’m kinda looking for another EDC to carry on occasion. I know there’s gonna be some biased opinions but more the better!

As the title says it’s built into the lower receiver and doesn’t work because it’s the same laser from 1994 does anyone know how or if I even can throw some new batteries in it if so what kind

Yall have any recs? Looking for some sort of purse for my wife’s bodyguard

​

The smallest one that I know of which is HK p30sk is a little big compared, And to be honest. I hate the triggers

I know of two single actions.

The Smith& Wesson CSX E

Kimber Cds9

The FN reflex has an internal Hammer.

Double action guns I know in this size are 380 and I'm simply not interested in adding another caliber.

I'm just generally wondering if I'm missing one I Just don't know about it

I'm looking for a pistol to use with an IWB holster, so I'd prefer something compact rather than a full sized behemoth. For safety reasons, a decocker is a must for me.

I've already handled the following pistols, but neither was a good fit for me:

• CZ P-07: The slide release was difficult for me to reach.
• Beretta 92FS Compact: I couldn't get a secure grip on the pistol, and reaching the magazine release was awkward.

Control wise the Walther PDP hunter pro would be a great fit but no decocker since striker fired.

The possibility of mounting a red dot would be a plus but not a must

Thank you in Advance

I have a spare holosun 507k and I want to mount it on my benelli. The only mount I've seen is from chpws. Anyone done this to their shotgun?

https://chpws.com/product/benelli-m2-m4-to-holosun-eps-407k-507k-vortex-defender-ccw-ch-edc-edc-en-rmsc-max-hnt-r-max/

Can I slap a stock on my Mossberg shockwave now, or do I still have to go through some hoops?

Currently no one besides Savage manufactures a 7BC in left hand besides some freakishly expensive companies.

I am looking to build one for around 1500$
I currently hunt with a ROUGHTECH Tx3 .300

I have never built a bolt action.
I was wondering if anyone has a build sheet for something like this!
Ideally 16 ish inch barrel. I’m in the thick woods of north Idaho

I just got a can for my colt M4 22 LR , but the thread on the end of the barrel doesn’t match the GEM tech GM 22 can I just bought. Is there an adapter I can buy or do I need to switch out the barrel?