Second Jeep after a diesel WJ.

This was taken at my first RTV trial back in April. At the time it had 3" of lift, 32s and enough polyurethane in the front suspension to make ride comfort a theoretical concept.

Since then the entire project has become an obsessive quest to improve geometry, ride quality, steering feel and RTV competitiveness by fractions only I can detect.

It's now at around 4" of lift with an all-rubber front end and so drives much better, proving that many of my previous ideas were, in fact, a waste of money!

Next on the list is curing the Jeep lean with some OME leaf packs, as the rear suspension is largely in control of direction at the moment.

Looking forward to finally finishing it, for roughly the 752nd time, this year.

Haven't taken her out yet, possibly tomorrow

I just wanted something to make her look less hideous. Not perfect but it'll do just fine.

Hey guys,

Wondering if anyone has put emblems on their Jeep. I'm getting some body work done and provided all the emblems which were mostly ripped off of other jeeps. I was told that they can be spray glued on but it may not hold especially during the winter. I saw online theres some success with double sided 3m tape but then that raises the emblems even more, i'm not sure how much it could possibly raise them though. Either way i know it'll take time but I was wondering if you guys have done it and what's been successful.

I was told it be ideal if i can get them brand new but definitely hard to come by. After some research, I can still get most of them brand new except for the hood emblem and tailgate emblem that reads Jeep (5EM87SA1). This part is just impossible for me to find brand new. For context I have a 99 cherokee sport.

Anyways, am I still able to get a nice seal if most of my emblems have been taken off other jeeps?

My 1990 4L cherokee is leaking bad from the oil filter adaptor elbow. I bought new o rings to replace the 3 o rings inside of it. However I can't get it off. Most videos I see online use a T60 but mine just has a standard 5/8 bolt holding it to the block. There is not a lot of space between the elbow and the frame. I have tried to use a stuby socket and just a normal box wrench but the bolt is seized tight. Yes I have used a lot of penetrating oil allready. Dose not help. There is a lot of oil in the area from the leak so I am hesitant to try heat.

I have been thinking of using a few wobble sockets and connecting my impact to it. However, i'm scared of breaking the bolt off in the block. I have been also thinking of just saying f**k it and smearing JB weld over where the elbow meets the block to see it that would stop the leak.

Any advice? Has anyone try JB weld dose it stop oil from seeping through?

Thanks

Well,

I took my driver side front wheel off due to a flat and I think its time to upgrade a piece or two. Just wanting to share, see feedback, hear questions comments and concerns. 300,000+ miles. 2000 Xj Sport. 4 door inline 6.

Would’ve been funny if the other driver came out while I was there 😂

So I'm going to install JKS sway bar quick disconnect links on my Cherokee soon. But I'm also going to install longer brake hoses too. I read online that YJ brake hoses work on Cherokees and they're cheaper than extended ones for an XJ. So I looked on Rock Auto and they have the DORMAN H622063, but that brake hose is for raised suspension YJ. The raised suspension brake hose overall length is 24.5 inches meanwhile the stock YJ one is 20.38 inches. So should I get the longer one or stick to the stock length YJ brake hose? And for the one I get would that be enough for my sway bar disconnected on my XJ when it's flexing? I'm already on a 3 inch lift and 31s and my Jeep doesn't have ABS. Also, should I get a line for the rear too? And would those YJ hoses just bolt on and work no problem?

I couldn't find any quality videos on the swap but mostly just wanting to watch the install process and end result. Is a 5.7 swap worth it? There's cheaper routes for sure (ex. Small block chevys for v8 opitions). But I was just curious to see an XJ swapped 5.7 if anyone knows of any decent clips.

Does anyone know how I would mount a winch to the front bumper with my set up ? I have about 4 inches from the grill to the front of bumper Also does anyone have a windshield wiper reservoir under the hood ? If so what kit did you buy ? Thanks in advance! :)

people who have done it , is it worth the trouble ??

Previous owner did a 2x6 rocker conversion, but didn't seal it well. Failed inspection last year and once I pulled those off figured I'd do the floor pans while I was in there.

I have it all cut out and sanded down to good metal, but I've heard mixed reviews on lap joint / tacking it back together given I only have a flux core welder.

Does anyone recommend a shop in the greater Pittsburgh area? Does anyone have the skillset and a weekend day (I'd supply beer, pizza, and whatever else is requested) to help someone who's been struck by analysis paralysis for months?

https://nypost.com/2026/10/16/us-news/real-housewives-star-carole-radziwill-vows-to-buy-every-copy-of-the-post-front-page-exposing-her-scofflaw-parking/

Have had the xj parked for about 5 months and just started it up again the other day.

Noticed this but nothing in the oil or oil level changing at all.

No over heating or anything

My Jeep (1999 4.0 ax15 4x4) has developed a very annoying and perplexing problem. At random times, it will seemingly lose all battery power after I turn it off to where it acts as if I have no battery. When this happens, I can run the locker compressor but nothing else. No windows, radio, and the key doesn't cycle anything on. No interior lighting either.

I've had to jump it off twice and each time, it doesn't struggle at all and fires right up. Voltage reading is totally normal while running (alternator is good). Here's the weird part - other times though, the power just comes back on. It came back once when I opened the passenger door and then again yesterday while messing with the headlight switch. Sometimes, if I disconnect and reconnect the negative terminal on the battery, it will regain power. Other times, it won't.

The battery was made in 2024 and seems to be totally fine (I haven't really tested it yet). I thought maybe my aftermarket stereo amp was drawing power but that wouldn't really explain why it will come come back at random.

Any thoughts? I'm leaning towards a bad ground somewhere, a failing fuse, or bad battery connectors. I guess the battery could be faulty, too. I'm going to attempt to actually troubleshoot it but thought someone maybe has run into this problem before.

I cannot for the f***ing life of my figure out how these go in and STAY in. Please someone send directions asap. Doors in the AC compartment of a 1993 Jeep Cherokee Xj 4.0l L6 sport.

I've always thought they used the same sensor, but I'm getting told on Mopar parts sites that certain ones fit an 01 but not my 97. I have a standard 4.0 auto. Can I use these?

https://parts.mopargenuineparts.com/oem-parts/mopar-crankshaft-position-sensor-68407888aa

Hey all! I had something strange happen when I parked my car at work. Everything was operating normally until I parked. I hit the door lock button and then my instrument cluster stated to blink as did my taillights. I tried to turn on the car but it will not crank or do anything. Any help is appreciated thanks!

Needing some help if you guys think doing this in the air or on the ground is best? Also way you were able to move the axle towards the driver side, I had it settled and centered and parked for a month without snugging it up after a full lift upgrade, and now it’s pushed toward the passenger side. Maybe 1.5” I’d really like to get it ,tits centered, and then I’ll be able to do steering brace with pillow block and crossover but centering is a must before I start driving her again.

Please lmk and Tia

Got an aftermarket Radiator and I've decided to re run the trans cooling lines. However, Im stuck on what size of adapter i should get to go from the radiator to AN. The radiator is a Mishimoto radiator and I'm getting a trans cooler as well.