even if it is a little cursed lol

I bought an arcturus URGI and this is how it showed up. Im beyond pissed right now because i mean seriously??? This is how it showed up. The gun was falling out of the box and all the contents were damaged!! (Update: I called Evike and they said its the couriers fault. Theyve opened a claim for me and I should hopefully be getting a replacement soon. No hate to Evike these guys are awesome. Fuck FedEx!!)

Hi, no matter what I do this sits at an angle on the riser. It is straight at first but gets crooked when fully tightened. Any ideas? This is with the pts unity fast riser. Thx

Pretty much the complete opposite of the Mk 23. This thing is obnoxiously loud and ridiculously heavy..

Managed to pick up the clone-correct B&T replica made for the USP, which really finishes off the build.

For any USP owners out there, you can actually modify a SureFire X300 to mount directly onto the USP frame. Massive win, as it saves having to use aftermarket rails that make the whole thing look blocky, while opening up more options for aftermarket holsters.

Build list:

- Guarder steel slide and polymer frame

- Guarder steel threaded barrel

- Guarder recoil and hammer spring set

- Detonator steel suppressor-height night sights

- High-flow gas valves

- Umarex walther suppressor

- Sotac X300 light (modified)

Hello,

I am wanting to start a business related to airsoft since I love guns, and well, airsoft.

I have recently been blessed with an opportunity to machine basically anything for just the cost of materials, which makes prototyping a gun extremely easy and cheap.

I was wondering, if I were to make a full metal PM63, or an MPL/MPK, would anyone be interested?

In terms of internals, it would be GBB, and I would have to look into HPA aswell. Obviously, it would be done small scale, so I would not want to sell an airsoft gun, in which, parts are impossible to find. So, I am hoping I can piggyback off of a platform like a hi-capa, adjusting it to fit the gun & producing it on my own.

Whatever gun people end up being more interested in, it would be full metal, the body would be stamped and any parts with precision would be machined. The gun would be based off of the real dimensions, scale, and stamping.

Because I would be working with a low budget, once I get prototypes done, I would have to do presales. Which, I know is kind-of a pain in the ass, but I believe it would be worth it to alot of you. And, no, I can promise we will not be doing an exit scam like that infamous company who tried to sell a 3D printed HPA MPK.

I would estimate the price of each gun may be ~$500. But, I really cannot say for sure as I have not even decided yet!

I would also like to note, I can promise that the gun would be of good quality. It would be made fully in USA.

It's beautiful.

(ESD GHK AK drum)
(Yes, this takes GHK AK mags)

The only context I see in the comments is “Don’t ask 😂” from this video

I have a spring action m107 snowwolf if that helps

Trying to decide which one I should make my primary. They both fit well and are very comfortable so I guess it just boils down to which one looks better. Opinions?

W/ DCI guns threaded barrel

The little Beretta 950 from WE, Walther PPK from VFC and the Tanaka Works Smith & Wesson M500.

first impression: decent build quality, the dust cover is quite wobbly, the grip is also kinda wierd to say the least? (it tries to be wood and fails). came with both a steel hi cap and a plastic 10 round style 5.45x39 mag (yikes)

shot some test bbs, no chrono but it should be 440fps on 0.2g, trigger response is quite decent for not having a ETU

might post some more after using it for a few games

Customizing an AR-15 is basically just Lego for adults 🔥 comment your Gbbr setups 🫡👌

I just recently got into this Hobby, sadly in germany its very hard to find places and people to play with. I used my friends airsoft guns but Id love to buy my own. I am absolutly lost on how to begin, especially because of the german regulations. Anyone here from Germany who can help me out? ;-;

Hi!

We have a tokyo marui p226 and a WE m92 and while firing we noticed that both of them have problems with finishing a mag without leaking empty multiple times.

Could this be a lubrication issue?

edit: to answer your questions

It leaks from the top usually after three to five bbs fired, sometimes you can spot the cloud of gas escaping if u get the timing right.

As for the fire rate we were shooting cans so id say a shot every 5 seconds or so.

The magazines themselves dont leak after filling (nothing audible or smelly atleast) except for the p226 mag during filling.

The gas itself is rated 145 psi greengas and both guns are from shogun (dutch airsoft company).

FIXED: thanks for the advice about how to fill a magazine up correctly and how to tighten the valve it seemingly solved the issue.

yep it lives on

I have had this vest for a while. I'm going to buy a new one because of how it kinda looks cheap and the quick release makes it look cheap too.

Can yall recommend me vest/platecarriers to replace this one that kind of look like it.

Please comment them.

My Combat Machine M4‘s (I don’t know if it’s stock but it was a used one that was given to me for my birthday) front barrel came off. The only thing I did was put magazines in it and take them out when it came off.

Double Bell Scar-L 803b. I traded a M4 that i didn't use much for this, and got 120€ on top, since this is quite a lot cheaper than said M4.

External quality isn't as bad as people said, ofc i needed to tighten a few screws and use some electric tape to tighten some wobbling parts. The ambi selector switch gets offset sometimes, so i might take the gears away from the right side so that won't happen.

As for the internals i just had installed:

-Solink CNC 1:16 speed gear set.

-an adjustable nozzle (my tech didn't say which brand)

-SHS blue 15 steel tooth piston and piston head

-Gate Aster V2 SX Expert MOSFET, and the quantum trigger that came with it

-4uantumn Hop up bucking and nub

-Shimming and AOE fixed

I use BattleAxe 110rd mid caps, shoots ~1,4J with 0,30g BBs

I feel like i should get a new motor at some point, stock one is ok but nothing special, a new red dot is also something i will probably get. I want something chunkier, since the Scar is a chunky gun, 3,8KG empty, with attachments and fully loaded about 4,5KG, for reference my RK95 TP empty is around 3,5KG and fully loaded 4,2KG.

Hey everyone, I'm planning an AK-74 build using the Specna Arms CORE J-Series AK-74M as a donor for the receiver/body, folding stock, dust cover, and outer barrel. I'm planning to use a CYMA-style V3 AEG gearbox and want to make sure the parts I'm looking at will fit before I buy everything.

I've seen a few people mention that Specna AKs use similar dimensions to CYMA AKs, but I wanted to ask if anyone has experience with this exact model.

Here are the parts I'm considering:

• Gearbox: CYMA Version 3 AK AEG gearbox
• Hop-up: Matrix one-piece metal AK AEG hop-up chamber (CYMA OEM)
• Upper handguard: LCT CNC Sport Upper Handguard, model ZB-19N
• Lower handguard: LCT CNC Sport Handguard, model ZB-10L
• Charging handle: APS reinforced AK-series AEG charging handle
• Safety/selector: 5KU CNC fire selector for CYMA AK AEG rifles
• Motor grip: EMG x Strike Industries polymer EPG motor grip
• Dust cover and outer barrel: Keeping the Specna parts

My main questions are:

1. Will a CYMA V3 gearbox fit inside the Specna CORE J-Series AK-74M receiver, or are there differences in the mounting points or dimensions?
2. Will the Matrix/CYMA-style AK hop-up chamber work with the Specna outer barrel and gearbox?
3. Are the LCT ZB-19N upper handguard and ZB-10L lower handguard compatible with the Specna AK, or would they need modification?
4. Would the APS charging handle fit the Specna dust cover and charging assembly?
5. Would the 5KU CYMA AK selector work with the Specna receiver and CYMA gearbox?
6. Would the EMG x Strike Industries motor grip fit the CYMA V3 gearbox and Specna receiver?
7. Are there any other parts or compatibility issues I should know about before starting this build?

I'm trying to keep the build reasonably affordable, so I'd rather confirm compatibility before spending money on parts that won't fit.

If anyone has built or modified a Specna CORE J-Series AK, I'd really appreciate any advice, especially from people who have used CYMA or LCT parts on one. Thanks!

After a couple shots hissing sound coming out. Not sure if this is normal or something I need to fix. I know nothing about dwel times. The only other HPA gun I have is a wolverine and it's never had this issue

Hey, I’m using 8mm bushings, but one side of my sector gear won’t fit into the bushing. It’s the side marked “13:1 U.F.C.” The other side fits fine, and the other gears in the set fit into the bushings without any problems. Does anyone know what could be causing this?