Did some work on my HPA rifle emg f1 bdr lower and upper and a g&g handguard, used to be a red handguard as u can see but they way it was made the mlok where off set

I was looking at the dye i4 and it's more expensive than the gun I picked out!

Hello, Reddit. I have seen people with similar problems (and sharing that here, which is why I chose this subreddit in particular) but they usually seemed to figure it out after a while. However, I don't feel like waiting, so here we are. :P

In the attached picture, in the palm of the hand, are the 2 pieces and 1 spring I am having difficulty placing. I know which holes the pieces go in, but I can't for the life of me find where the damned spring should stay. I tried sticking the pieces in it, I tried sliding it in both the holes in desperation, but I am left stumped. Any help?

P.S.: since this is the Internet – and more specifically Reddit – I feel like I should specify that no, this post is not an excuse to write that last portion of the second paragraph for the funny. I genuinely seek help to fix this issue. Thanks :]

so, flash hider didn’t come off at all..

looks like i’m not going to this game day or any for the next year

anyone know where i can find a rifle dirt cheap and asap?

I put in the co2 cartridge it made the pop sound I put the bbs in and it won’t fire out. It just puts a bb in the barrel and when I point it down the bb rolls out.

Hello,

I am wanting to start a business related to airsoft since I love guns, and well, airsoft.

I have recently been blessed with an opportunity to machine basically anything for just the cost of materials, which makes prototyping a gun extremely easy and cheap.

I was wondering, if I were to make a full metal PM63, or an MPL/MPK, would anyone be interested?

In terms of internals, it would be GBB, and I would have to look into HPA aswell. Obviously, it would be done small scale, so I would not want to sell an airsoft gun, in which, parts are impossible to find. So, I am hoping I can piggyback off of a platform like a hi-capa, adjusting it to fit the gun & producing it on my own.

Whatever gun people end up being more interested in, it would be full metal, the body would be stamped and any parts with precision would be machined. The gun would be based off of the real dimensions, scale, and stamping.

Because I would be working with a low budget, once I get prototypes done, I would have to do presales. Which, I know is kind-of a pain in the ass, but I believe it would be worth it to alot of you. And, no, I can promise we will not be doing an exit scam like that infamous company who tried to sell a 3D printed HPA MPK.

I would estimate the price of each gun may be ~$500. But, I really cannot say for sure as I have not even decided yet!

I would also like to note, I can promise that the gun would be of good quality. It would be made fully in USA.

I want to se ar 15 builds with this handguard or something similar because i cant finde any.

New video out on my channel. Hope you guys enjoy it :)

My Combat Machine M4‘s (I don’t know if it’s stock but it was a used one that was given to me for my birthday) front barrel came off. The only thing I did was put magazines in it and take them out when it came off.

yep it lives on

I have had this vest for a while. I'm going to buy a new one because of how it kinda looks cheap and the quick release makes it look cheap too.

Can yall recommend me vest/platecarriers to replace this one that kind of look like it.

Please comment them.

New to airsoft. Using a GBBR; is it normal for BB’s to have that little scratch after being fired?

Not reusing them, don’t worry.

Cheers!

Hi!

We have a tokyo marui p226 and a WE m92 and while firing we noticed that both of them have problems with finishing a mag without leaking empty multiple times.

Could this be a lubrication issue?

edit: to answer your questions

It leaks from the top usually after three to five bbs fired, sometimes you can spot the cloud of gas escaping if u get the timing right.

As for the fire rate we were shooting cans so id say a shot every 5 seconds or so.

The magazines themselves dont leak after filling (nothing audible or smelly atleast) except for the p226 mag during filling.

The gas itself is rated 145 psi greengas and both guns are from shogun (dutch airsoft company).

FIXED: thanks for the advice about how to fill a magazine up correctly and how to tighten the valve it seemingly solved the issue.

New rook to our team is having issues maintaining his gait. When he runs/slides or does practically any maneuver that requires explosive movement, it just looks awkward. This is starting to affect how he carries his rifle and its bordering on total neglect on line of fire safety given he can't control the weight of the gun, much less the barrel. We've tried practicing, obstacle courses and building stability, but its not working. Tips?

I just recently got into this Hobby, sadly in germany its very hard to find places and people to play with. I used my friends airsoft guns but Id love to buy my own. I am absolutly lost on how to begin, especially because of the german regulations. Anyone here from Germany who can help me out? ;-;

Customizing an AR-15 is basically just Lego for adults 🔥 comment your Gbbr setups 🫡👌

I have a spring action m107 snowwolf if that helps

first impression: decent build quality, the dust cover is quite wobbly, the grip is also kinda wierd to say the least? (it tries to be wood and fails). came with both a steel hi cap and a plastic 10 round style 5.45x39 mag (yikes)

shot some test bbs, no chrono but it should be 440fps on 0.2g, trigger response is quite decent for not having a ETU

might post some more after using it for a few games

Trying to decide which one I should make my primary. They both fit well and are very comfortable so I guess it just boils down to which one looks better. Opinions?