even if it is a little cursed lol

Hi!

We have a tokyo marui p226 and a WE m92 and while firing we noticed that both of them have problems with finishing a mag without leaking empty multiple times.

Could this be a lubrication issue?

edit: to answer your questions

It leaks from the top usually after three to five bbs fired, sometimes you can spot the cloud of gas escaping if u get the timing right.

As for the fire rate we were shooting cans so id say a shot every 5 seconds or so.

The magazines themselves dont leak after filling (nothing audible or smelly atleast) except for the p226 mag during filling.

The gas itself is rated 145 psi greengas and both guns are from shogun (dutch airsoft company).

FIXED: thanks for the advice about how to fill a magazine up correctly and how to tighten the valve it seemingly solved the issue.

New to airsoft. Using a GBBR; is it normal for BB’s to have that little scratch after being fired?

Not reusing them, don’t worry.

Cheers!

It's beautiful.

(ESD GHK AK drum)
(Yes, this takes GHK AK mags)

The only context I see in the comments is “Don’t ask 😂” from this video

Why are you add this cool and beautiful gun huh?

Holy Warrior HW PC-1.

Haven't used it in a game. I only larp. I didn’t even know they had this but then they said “custom reticle” and I had to get it immediately.

Requires LIR2032 instead of the typical or it doesn't last long at all. Can use their sketchy software to add 3 custom reticles.

Normal preset reticles can be zeroed digitally with buttons. Custom reticle needs to be zeroed from the get go when drawing it. Only white is available without modding.

Uses a 74x40 pixel oled screen.

Pretty much the complete opposite of the Mk 23. This thing is obnoxiously loud and ridiculously heavy..

Managed to pick up the clone-correct B&T replica made for the USP, which really finishes off the build.

For any USP owners out there, you can actually modify a SureFire X300 to mount directly onto the USP frame. Massive win, as it saves having to use aftermarket rails that make the whole thing look blocky, while opening up more options for aftermarket holsters.

Build list:

- Guarder steel slide and polymer frame

- Guarder steel threaded barrel

- Guarder recoil and hammer spring set

- Detonator steel suppressor-height night sights

- High-flow gas valves

- Umarex walther suppressor

- Sotac X300 light (modified)

Double Bell Scar-L 803b. I traded a M4 that i didn't use much for this, and got 120€ on top, since this is quite a lot cheaper than said M4.

External quality isn't as bad as people said, ofc i needed to tighten a few screws and use some electric tape to tighten some wobbling parts. The ambi selector switch gets offset sometimes, so i might take the gears away from the right side so that won't happen.

As for the internals i just had installed:

-Solink CNC 1:16 speed gear set.

-an adjustable nozzle (my tech didn't say which brand)

-SHS blue 15 steel tooth piston and piston head

-Gate Aster V2 SX Expert MOSFET, and the quantum trigger that came with it

-4uantumn Hop up bucking and nub

-Shimming and AOE fixed

I use BattleAxe 110rd mid caps, shoots ~1,4J with 0,30g BBs

I feel like i should get a new motor at some point, stock one is ok but nothing special, a new red dot is also something i will probably get. I want something chunkier, since the Scar is a chunky gun, 3,8KG empty, with attachments and fully loaded about 4,5KG, for reference my RK95 TP empty is around 3,5KG and fully loaded 4,2KG.

I bought an arcturus URGI and this is how it showed up. Im beyond pissed right now because i mean seriously??? This is how it showed up. The gun was falling out of the box and all the contents were damaged!! (Update: I called Evike and they said its the couriers fault. Theyve opened a claim for me and I should hopefully be getting a replacement soon. No hate to Evike these guys are awesome. Fuck FedEx!!)

Hello,

I am wanting to start a business related to airsoft since I love guns, and well, airsoft.

I have recently been blessed with an opportunity to machine basically anything for just the cost of materials, which makes prototyping a gun extremely easy and cheap.

I was wondering, if I were to make a full metal PM63, or an MPL/MPK, would anyone be interested?

In terms of internals, it would be GBB, and I would have to look into HPA aswell. Obviously, it would be done small scale, so I would not want to sell an airsoft gun, in which, parts are impossible to find. So, I am hoping I can piggyback off of a platform like a hi-capa, adjusting it to fit the gun & producing it on my own.

Whatever gun people end up being more interested in, it would be full metal, the body would be stamped and any parts with precision would be machined. The gun would be based off of the real dimensions, scale, and stamping.

Because I would be working with a low budget, once I get prototypes done, I would have to do presales. Which, I know is kind-of a pain in the ass, but I believe it would be worth it to alot of you. And, no, I can promise we will not be doing an exit scam like that infamous company who tried to sell a 3D printed HPA MPK.

I would estimate the price of each gun may be ~$500. But, I really cannot say for sure as I have not even decided yet!

I would also like to note, I can promise that the gun would be of good quality. It would be made fully in USA.

Anyone running a VFC MP5 with a Airtac adapter? Not sure which size msgs to go for ie if the 120 mids will look too big or the 65 mids will look too small
Cheers!

W/ DCI guns threaded barrel

Never tried paint an airsoft replica
I was tired of the total black so i tried

I have a spring action m107 snowwolf if that helps

Hi, planning to buy the EC-645-5, is it a good idea? for context, this is my first time buying an AEG rifle, so I really want it to last and be ready out of the box.

Drop yours in the comments!

Btw review for the swamp rat is live on my YT channel ;)

S&T M870 with FCW folding stock (PPS ver.), APS sight and 3D printed shell carried (w/ deactivated 12 gauge)

It's unusual for a "shotgun" as it fires a single, high velocity BB, has a TDC hop and is compatible with VSR10 barrels and buckings. It also uses a 22-round magazine (the mock shell port) rather than shells.

Hi, no matter what I do this sits at an angle on the riser. It is straight at first but gets crooked when fully tightened. Any ideas? This is with the pts unity fast riser. Thx

I'm looking at getting the LCT AK-12 EBBR after taking a long hiatus from airsoft, but I recall EBBR's generally being pretty disliked and considered bad/unstable guns that fell apart easily. Is this still the case?

I know GBBR's are typically the way to go for the recoil and moving parts, but none of the fields near me do any kind of milsim/GBBR only games and I don't have the disposable funds right now to afford the gun and some extra mags mags for my dream GBBR (the VFC 74M) to make it actually viable in the field due to the low capacity of GBBR mags compared to even a mid-cap AEG.

Is the LCT AK-12 EBB (and EBBR's in general) still considered 'bad' by most airsofters? I'm not a super competitive player so trigger response isn't a huge deal to me, but durability is as I don't want something that'd fall apart after a handful of games.

My Combat Machine M4‘s (I don’t know if it’s stock but it was a used one that was given to me for my birthday) front barrel came off. The only thing I did was put magazines in it and take them out when it came off.

I want to buy an M9 as my first pistol but I don't know what brand(s) make good ones

It should be blowback, preferably able to use both green gas and co2 and shoot about 1 joule. Otherwise there isnt anything specific I need it to have or be able to do (at least that I can think of)

incase my location affects the options available, I live in denmark

A link or advice would be appreciated but isnt a necessary, I just need to know what brand to buy or more importantly what brands not to buy