Some very strange seller on a russian analogue of eBay is selling brand‑new Ninjutso Ten Air for only $7 more than the VXE R1 Pro. Might be one of the best purchases i've ever made.

(How so tight the scroll wheel is here, lol)

Really digging this combo. Just received my WLmouse Qisha to pair with my DAv4 Pro Niko. My old Paracontrol V2 is really worn out so i wanted to try something new.

source - https://www.bilibili.com/opus/1259720109876838405

So this is kind of an update on an earlier post in which I review a bunch of mice with respect to my tilted knuckle claw grip. The earlier post was mostly concerned with shape, but will discuss quality concerns also. I had no performance issues with any of these mice, and the software for all is adequate.

https://www.reddit.com/r/MouseReview/comments/1we6gxl/a_review_of_gaming_mice_for_my_grip/

About me:
I main THE FINALS. Probably a little above average skill level.

Hand size: 19.5 x 10 cm

GLSSWRKS Polarity, with 4-6 Xraypad U9 air 8mm dots

Grip:
My grip seems to fall somewhere between pincer claw and knuckle claw. I favour using my thumb, pinky and ring finger to triangulate around the sensor, as this allows for a wide range of movement in micro corrections (see pic). To support this, the mouse is quite angled in my hand (about 20 degrees in the picture), and therefore the rear of the mouse pushes into my pink/ring knuckle. The primary support is at the pinky side, but larger mice will contact more of this space. This contact point, and my wrist gently resting on the pad provides most of the stability I need for tracking.

Sora V3
This shape feels very locked in for me, and size wise kinda feels like a tuned X2 medium. Due to the larger size this pushes me more towards relaxed claw. The hump is higher than the X2 and pushes nicely into my ring knuckle, and my fingers fall naturally into a comfortable position around the sensor. The sides have a mild taper and angle, so feel much less flat than the X2. The scroll wheel feels a little further forward that I would like given how relaxed my grip is here, though this is a minor complaint. Side buttons are well positioned for my thumb. Really a GOATed shape for me at what I consider a medium size.

Scroll wheel is really nice, even forward and backward. Quite light. No complaints about side buttons, and the main clicks feel great. Super snappy and spammable. idk if SPDT is a gimmick, but they do feel very responsive. Coating feels great, a bit rubbery, no problems.

On glass with 6 U9 air 8mm dots this thing is loud. The base is super thin and so the mouse echos, and seems much more sensitive to scratching and dust than other mice (the X2 med and mini are SO MUCH quieter). This was super frustrating at the start and really put me off using it. Reducing the dot count to 4 makes it a lot more playable. On cloth this is not an issue.

In terms of shell build, it feels like the cheapest premium mouse I have. Quite a lot of flex and just doesn't feel solid. For me I'd rather they pushed past the 40g weight a bit to make it more solid.

Overall a pretty easy recommend if you like the shape. If you're hard on your mice or particularly sensitive to noise, probably not for you.

CRDRAKO KO-ONE
Very similar in size and feel to the X2H, with a less pronounced rear hump, pushing me into a more aggressive claw vs the X2H which is more relaxed. This makes the sides feel a bit more narrow, though I don't think they are. My fingers end up sitting quite low on the sides, almost touching the pad which I don't get with the X2H. Feels very natural to hold, but small (not a bad thing). Very stable in the hand for such a small mouse.

Great scroll wheel, nice even steps, quite soft. Main clicks are very light and quiet, not dissimilar to omron opticals. Again the SPDT clicks feel super responsive. Side buttons are the only real complaint, they're tiny. The rear click is recessed and is a bit of a reach for my thumb. Coating is nice and rubbery, no complaints.

No complaints on build. Pleasingly quiet on glass, feels sturdy and stable.

Recommend for those who want something with a little less booty than the X2H mini.

Pulsar Tenz 2.0 mini
I think this is my perfect shape. Despite what you might think from Eloshapes, the Tenz feels significantly wider than the KO-ONE. The hump is a bit higher and perfectly pushes into the ring finger knuckle. Finger position on the sides is great and feels very locked in. Scroll wheel position is perfect. It feels so good in the hand. Like a ying that has had the length compressed by a few mm.

Scroll wheel has good steps, but is a little more rattly than I'd like or maybe it's just I can feel vibrations through the shell. Side button shape and actuation are flawless. I'm not in love with the main clicks, and I'm not quite sure why. They are notably stiffer and louder than other pulsar mice but are still well implemented and are spammable. I think they're overly tactile, and I can kind of feel their vibration through the shell. It's a small complaint but does reduce my enjoyment of the mouse. I don't notice it in game, but between matches or doing other stuff it makes me want to grab a different mouse.

Otherwise the build is excellent as it typical of pulsar mice. Feels very solid and stable. Great coating. Weight and balance are perfect, glad to see we're getting some lighter pro series mice. If anyone knows of a mod to reduce vibrations pls let me know :)

I don't usually comment on battery because I don't really care, but I get a lot more time out of this than the X2 mini.

Overall I'd recommend this to any other small mice enjoyers who claw grip. Easily the best shape for me that I've tried. So close to perfection.

source - https://www.bilibili.com/opus/1260003616387760131

info - https://www.bilibili.com/opus/1260019765468987477

Mods: Removed DPI button, Removed Powerplay, replace AA battery for AAA lithium battery

The mouse now weights 65g and feels pretty good.

Are there any 3d printed scroll available for g309? Im looking for a lighter one to reduce the weight by another 1 or 2 grams

I'm going to put this through quite a few hours of gameplay between today and tomorrow. The mouse is slightly smaller than anticipated not a bad thing, but we'll see how my hand feels later. Love the Omron switches, very light and clicky, very spammable for me. Side buttons are ok, noticeably louder and require slightly more force to actuate. I heard some reviews say they were able to actuate the side buttons when trying to flex the sides, this was not the case on my unit. The only flexing I noticed was when pressing down aggressively it felt like the center of the mouse started to drag more than the ends, likely not something you'd necessarily feel on cloth. So far I think it's a great value for money, there was a coupon code on Amazon which brought it to $53, so at the price I'd say it's a bargain. Anyways just sharing some initial thoughts. Stock skates feel good, no complaints there so far.

.

Hand size if my math maths converting to metric is 19.5cm x 8.25cm.

hi all. I have no issues with aiming but i'm trying to improve comfort here, particularly my the wrist which I tend to feel a little bit of strain after hrs of gaming(even with 60g mouse and using a light grip), and I use my whole arm to aim. On the surface, palm grip seems like it would be the best, but thinking about it more, I tend to use my wrist way more with this grip compared to when i use claw or fingertip grip, in which I incorporate my fingers more. I never get finger fatigue or strain, so wouldn't palm grip not be the best for me? Or maybe some type of claw-palm hybrid would be the better grip for my case?

It is currently being sold on Taobao in China.

The price is ¥1399.

The Taobao sales page title is "雷蛇宝可梦30周年联名Pixel Art款毒蝰V4Pro电脑无线游戏鼠标礼物".

I use Hyperx Pulsefire Haste 2 with palm grip, will i like Razer Cobra more or Hyperx Pulsefire Core? i want it as secondary mouse

Which would you recommend for gaming and everyday use?

• Hand size: 19 × 8.5–10 cm
• Grip: Relaxed claw / fingertip hybrid, with some palm contact
• Budget: Under ₹3,000
• Buying location: India 🇮🇳

My main priorities are performance, shape, coating, battery life, and build quality.

Should I wait for the X1 SE+ to restock on ATK's official website, or go for the R1 NearLink or A9 Base instead?

Would appreciate advice from people who have used these mice!

I live here in Asia (Philippines) and I would like to share to you how I mod this mouse, judging by people's experiece with XS-1 sensor, Pulsar dont have a good reputation when it comes to battery of their mice.

I modded my mice already future-proofing it.

Basic Info:

A.) This mice uses a JST 1.00mm battery connector, as opposed to older gen Pulsar that uses a 1.50mm JST

B.) My mice has no problems whatsoever, I just decided to increase its battery capacity like I usually do on my other mice.

C.) This is my first ever Pulsar mice , why did I bought it ? bcos of its misty-blue/sky blue color , we all know most mainstream brand mice (logitech/razer) does not release a Blue mouse

D.) This mice is powered by XS2 sensor with 54L series MCU, the 54L series is known to be VERY battery efficient so the stock 300mAh battery is already overkill for its spec. (im practically telling you, modding your mice is already not needed 😆)

E.) The battery polarity is REVERSED its BLACK/YELLOW/RED or Black(Ground) / Yellow (thermometer/sensor) / Red (positive) ; most after market battery in the market with JST 1.00mm came with a different polarity JST (if you dont understand this "E" I suggest you refrain from modding your mouse for any damage)

F.) VERY IMPORTANT !!! The flex cable or side button has a sensor, IF YOU BREAK that flex cable, youll break the entire mouse. , its impossible to make the mice work without the side button attached.

G.) The battery compartment for 600mAh is too small and might require some cutting in order to fit the new battery / if you dont want to do cutting mod, make sure to buy the FAT TYPE battery , my battery is the "FLAT" type 600mAh

Modding procedure:

1.) AFTER youve successfully followed the battery polarity there is a high chance that the mice WONT read/accept the new battery youve just inserted.

2.) as mentioned in G.) the battery I upgraded required some cutting in order for it to fit, be sure to have "gundam" sized pliers/nippers so you can cut thru the base of the shell without doing major damage.

3.) in order for your mice to accept the new battery, make sure to connect your mice VIA the SOFTWARE web based tool (bibimbap) , insert/unplugged the JST connector to the PCB until it FINALLY accepts the new battery. (it took me a good 10mins doing this over and over again)

4.) You might need a NEW MOUSE FEET/SKATES as the stock skates is already unuseable after disassembly. mouse feet area accepts dot skates and you have a wide surface area to put your dot skates.

5.) it took me roughly 2 hours of charging WHILE THE BATTERY IS CONNECTED TO THE SOFTWARE, till I finally received the BLUE RGB or it means fully charged !!! this mice has 2 rgb colors BLUE(fully charged) ; RED(charging)

6.) Continuation of 5.) , despite the mice being at 99% just wait for it patiently till it fully charge.

7.) CAUTION(1) DO NOT USE FAST CHARGERS OR QUICK CHARGERS, just use a regular charger as not to break or force power into the new battery

8.) CAUTION(2) the Side button PCB is programmed with the main PCB, its possible that your mice wont work if you damaged the side button PCB; right after inserting the new battery make sure to insert the side button PCB.

9.) if youre doing some cutting to fit the new battery, make sure that your PCB board is free from any debris from the plastics youve cut. as it "may" damage your mice in the future

10.) prepare basic tools such as Quick drying adhesive/glue, double sided tape, philips screw(small), tweezers and . . . A LOT OF PATIENTS.

11.) I ordered extra JST connectors 1.00mm/1.25mm/1.5mm this mice uses the 1.00mm so its very reparable compared to other pulsar mice that uses the 1.50mm JST, you might damage the JST connector while reversing the battery polarity so the extra JST is needed just in case.

12.) to get a much more accurate reading, drain the new battery you just inserted so youll have the full 600mAh capacity reading (I never bothered doing this, but I just gave this additional info for your reference)

13.) I would suggest you have atleast the basics of electronics PCB board when modding ANY KIND of mouse. as you might damage the mice itself especially the flex cable which is VERY VERY fragile.

14.) I know people wont mod their brand new mouse 🤣 but atleast I already laid out all the infos you might need in the future.

15.) READ EVERY POINTS I just mentioned in attempting to mod your mice, remember consider your warranty void once you removed the stock feet of your mice

16.) If you live here in the PHILIPPINES, I ordered the battery via SHOPPEE online app SHOPEE 600mAh Battery 3pin JST 1.00mm

17.) I am not liable whatsoever to any damage you might incur to modding your brand new 2026 Tenz mouse 😆

I just ordered an ATK A9 Plus 2.0 but I received the 3.0 version, which is not advertised in any of the variant of this model. It's not even an option from where I ordered it.

From the box, all the way to the papers inside the box and information under the mouse, it says that the model is "A9 Plus 3.0."

Has anybody here received anything like this?

hello, i bought this mice and i'm very happy with it but there's an issue, each time i want to connect it with the cable to charge it, the device disconnect and reconnect in chain with the windows sound who pop up constently, at first i tried to ask ai and tried many things but it didn't resolved anything, so i ordered a replacement on amazone but even the new has the same issue so i suspect it's an error from my computer but i don't know what can i do, if you have a idea of what could be the fix to my issue i would really like to know. I can't do the devi update cause it keep disconnecting.

pc spec:

rx 6900xt

ryzen 5700x3d

msi b450 tomahawk max ii

1000w psu

i'm on windows 10 btw.

I like the amount of buttons that the G502 has, especially the buttons to the left of the LMB, but one of the side buttons is placed right where I would like to rest my thumb.
What mice do you recommend that have nice buttons but not as many as an MMO mouse?
Wireless is preferred, under scroll wheel buttons are okay, and preferably around 100g or less.
I was also looking at the Steelseries Aerox 5 but I read that it can have durability issues.

Disclaimer: I am not a professional reviewer, and by all means if another reviewer would like to go ahead and make a more detailed review on this mouse, I left a link to the page I bought the mouse from at the bottom of the post.

So, I had recently bought the Womier G59 mouse from bestbuy while it was on sale for $49.99, because I was in the market for a lightweight mouse with 8k polling capability (the mouse arrived 5 days early) and needless to say I am pleasantly surprised by how good this mouse is. Out of the box it comes with a user manual, a USB-C charger, an extra hot-swappable rechargeable battery, grip-tape (which looks exactly like the attack shard grip tape, honestly some great looking tape,) and the G59 mouse itself. The mouse weighs 68 grams capable of 8k polling, can go up to 30,000 DPI, uses the paw 3950 sensor, has a clickable-oled display on the top which shows the DPI setting, battery setting, connection setting and it changes between the preset DPI settings set on the mouse and each setting can be toggled on or off using the software that can be found on the official Womier website.

The mouse: 9.5/10

Accessories in the box: 10/10

Software: 7.5/10 (kind of confusing at first and when I went to install it windows defender didn't let me install it at first, although it was a false positive according to VirusTotal.)

Gaming experience: 9.5/10

Mouse feel (palm grip): 8.7/10

X-Factor: 11/10 (the oled screen is such an nice touch, the battery display level is very helpful.)

Total score: 9.3/10

Womier G59

Hello,

I am looking for a reliable wireless mouse- dongle and/or bluetooth, anything is fine within a budget of INR 2000.

I currently have a Logitech M221 Silent wireless mouse which started troubling with double click or no click issues after 1.5 years. Previously, I had a mouse from Logitech (dongle+ bluetooth, can't recall the model name/number) which started having the same problems just after 1 year.

I also have a Logitech M90 basic wired mouse which has been working without a hiccup for 6 years- also survived a flooded bag once when a water bottle leaked. Yet it continues to work like a factory fresh piece and has been most reliable till now.

I prefer using wired mouse for work. But while traveling, I carry a wireless one. Hence looking for a reliable wireless mouse.

Thanks in advance.

Hello, i am here to ask what would be the best budget mouse to buy. I have seen some threads and it seems that the shape is the most crucial part in the decision on what to buy, i currently have a Logitech g203 and i think that the shape is perfect but it started double clicking a week ago so i have to change. I have my eyes on the ATK VXE r1 SE+ as i would like to go wireless, any other or just better options?
Thanks