My best friend (who wouldn’t know the difference between T568B or A) just finished building his retirement house. He followed my advice and got all Ethernet everywhere. Problem is, they didn’t run or install a media enclosure. It’s all run in this cabinet. Would y’all recommend giving up on the media enclosure and just organizing the cabinet (putting in a patch panel, spooling the wires, wall mounted switch, etc)? Pull the shelves and install the media enclosure in there?

I added a switch to my fiber router, I have two WiFi pucks to better give internet to the house. It was working all last week not it’s not. I need help.

I have switched from virgins 500mbps to zens 900 mbps in august. Virgins wifi around the house was quit decent but i would always have problems with intermittent wifi and other things so decided to switch to zen as all the reviews on it were good and it would be full fibre which is meant to be better than what virgin uses.

Now that I have switched I'm having problems with the wifi signal not reaching to the rooms (barely getting 10mbps) and having family complain everyday about the Internet.

Is this a zen problem or is it because of the mesh wifi system (not backhauled) that i am using?

Do you have zen and are you having the same problems?

Pls help

I just got a new house, and it does not have a network installed. I got a quote for installation, and it's much more than I was hoping to spend.

If I get the Cat 6A S/FTP cable run, how hard is it to terminate the cables in each room and set up a patch panel in the basement so I can run my switch from there?

I have done this before with Cat 5 about 25 years ago, so I have some clue of what will be needed, but I have not done it since. I'm not sure of the exact steps or what is needed.

any info would be helpful, thank you.

Hey! I’m having a bit of a complicated issue. To preface, i have absolutely no experience when it comes to WiFi or home internet at all.

I currently rent a room from my parents, and since I recently graduated high school, I really wanted to get a computer since I was not allowed to own one when I was younger. So I bought a gaming laptop off a friend, and I’m super exited to use it. The only issue is, we have a weird little T-Mobile box which they always keep unplugged and don’t allow me to use it most of the time. From what I know there is no actual cable internet running to my house. I’m looking for a somewhat affordable solution that will allow me to have my own internet in my room. I have no idea where to start to any advice would be appreciated!!!

Thank you.

Edit: kinga js reposted without thinking but anyways

Im looking for help with my home internet because its pretty shit and im trying to look for maybe a better router or wiki extenders or wtv

I'm looking to upgrade my home network to start a homelab.

I want to avoid if possible to setup the AP:s in the ceiling, because I don't have access to any ethernet from the attict and I want to avoid running cable along the walls. Today I have a pair of Nest Wifi points sitting on a shelf.

My question is if any of you have an AP made for ceiling mounting on a desk or shelf of some sort and if it works well. Or if there is any AP:s that can handle VLAN that is designed for this.

So ive been noticing that i have been getting frequent packet loss whenever i play rocket league and i guess its more noticable on that game compared to others. Dont know if its a problem on my end or if its a problem on the games end. I use wireless on my pc as i dont have an ethernet cable and the router is downstairs. I also use xfinity https://share.pingplotter.com/EjysJzh3ZT1

I have no access to my apartment’s modem because it isn’t in my unit, and if I did, I’m not allowed to touch it. I also have no ethernet wall jacks in my unit.

How on earth can I get better wifi without getting my own monthly service? Are there standalone routers I can just plug into a wall in my house without physically connecting to a modem or ethernet?

Okay so recently for some reason my internet speed has been REALLY slow only on my pc. Every other device works perfectly fine, but when it comes to my pc it needs like 15 seconds to load a website. After some testing I've noticed that it was actually the DNS Resolution which took the most amount of time. The results were mixed, sometimes it would load instantly but 90% of the time it took a good 15 seconds. I tried everything like flushing the dns, changing dns, testing the ping but nothing seemed to work. And in the given picture I tested it again and it took dns 12 seconds just to connect. I hope someone will be able to help me with this because it's been so annoying to deal with this.

Just watched a Gamers Nexus video regarding a firmware vulnerability with essentially all recent ASUS routers and wondering if it's worth considering replacing this relatively new router.

My Wired POE router ( EBG19P ) runs a couple Zyxel AP's for regular internet surfing...heavy bandwidth users (gaming console, CAD Workstation, etc) are all wired. I have a couple VLANS that segregate IOT stuff. Relatively basic network stuff...I find networking frustrating to deal with and the ASUS has been better than previous routers i've owned, but I'm sure theres much better routers out there.

So would appreciate any input/discussion around upgrading from ASUS...wether this vulnerability is a real issue if I am keeping firmware up to date, disable remote access, etc.

Thanks!

Hi, hopefully it's ok to ask this here. A friend has a home wifi network consisting of a bunch of old apple airports of various kinds. He wants to keep them because he uses them to stream audio from an iphone or computer to various stereo sets using the digital audio out capability. I'm concerned that since the last security update for them was about 7 yea4rs ago, it might not be a good idea. Would getting a modern router and placing it between the modem and the main airport base station mitigate the issue? If so, advice on a good choice? The performance of the current network is pretty satisfactory despite the age, so doesn't have to be anything high end I don't think. I see a lot of people who love ubiquiti, but I'm a little lost looking at their site. Or would that be overkill for this use case? Advice appreciated.

Both routers currently cost the same in Belgium. Which would you choose?

I live in a 100 m² apartment with a normal amount of connected devices, including Zigbee and some Matter-over-Wi-Fi devices. The system is also Thread capable but I don't have any Thread devices yet.

My homelab runs on a N150 mini PC with Proxmox, Home Assistant, AdGuard Home, Immich, Paperless-ngx and Proxmox Backup Server. I use Cloudflare Tunnel and Tailscale Funnel for remote access.

I've previously owned a FRITZ!Box 7590 AX and was quite happy with it. It's a solid system, but unfortunately its 2.4 GHz Wi-Fi eventually died and now I'm back on the ISP router.

I'm currently using fiber internet with WAN via Fiber ONT. In the future, I'd like a house with wired access points, VLANs, PoE cameras and a managed switch.

I'm leaning towards the UniFi Dream Router 7 for its networking features and upgrade path, but I'm tempted by the FRITZ!Box 5690 Pro because of my previous positive experience.

What would you choose, and why?

Both are the same price

I wanna ask about "TL-WA850RE v6.0" working as an AP
 connected it to my home network router via ethernet. It worked just fine for a couple of weeks BUT recently it just disconnects randomly, I believe it's when no one is connected to it or actively online, I tried to give it a static IP in the router DHCP Reservation, It worked fine but when I slept last night and woke up I found it's using the same static IP and all BUT it the there is no internet connection...
what to do?
my home network router is provided by the ISP; It's hg630 v2

Thanks in advance for the help.

Hi everyone

We have a Bell modem/router connected to a 24-port TP-Link switch (unmanaged), which connects our computers, printers, and phones. We also provide one Ethernet connection to the landlord's security camera system as part of our lease.

Recently, the Bell modem has been losing its configuration, and we have to reactivate it. I'm not sure if the camera system is causing the issue.

We have a TP-Link Omada ER707-M2 router and OC220 Controller. I'm thinking of using them to separate our office network from the camera network, with different subnets on different LAN ports.

Would this work? I'm not familiar with VLANs and would prefer a simple setup. We have a limited budget, so I'm hoping to learn and do it myself rather than hire someone.

Any advice would be appreciated. I've attached our current network diagram.

Thanks

Hi I'm here looking for advice because I'm interested in the tech space but I don't have any experience and dont live alone so I figured properly configuring and eventually upgrading my home network would be a good start. I'm looking to one day get into things like pfsense routers and a family NAS to ditch streaming but that feels like getting ahead of myself for a first project. So what can be done to my network to get it to a safe starting point for future tampering?