Hi everyone,

I developed a small standalone utility called Key Detector for real-time root note and scale estimation.

**Overview:**

* **Live analysis:** Monitors incoming track signal and outputs candidate root notes and scales with certainty percentages.

* **File mode:** Drag-and-drop sample analysis directly onto the GUI.

* **Engine:** Native C++, zero added latency, low CPU usage.

**Compatibility:**

* Windows 64-bit (VST3). Tested in FL Studio.

* macOS build is currently in development.

**Download (free):**

https://neodym-dsp-live.vercel.app/#key-detector

Any feedback on detection behavior with polyphonic material or technical bug reports in FL Studio is appreciated.

I can't express how frustrating it is to have the gui freezing regularly because of its bad optimization. No other daw gives the same problems fl studio has. Right now it froze because i only opened the browser (the one on the left), I have a lot of sounds, but how the hell does that even happen? If I do that on logic it would never do that, too bad I don't use it to make music. It's been 9 years since I have started using this program (I have used the professional edition and purchased a license since then) and it's really sad but you can't really rely on it for professional use, it just never ever changes.

Edit: I don't mean to say that I just have a problem of my browser freezing, I mean to say that the program just breaks its functioning whenever it feels to, and does not guarantee a prolonged use, also this is the only daw I'll ever use because learning a workflow again on something else just feels too time spending.

theyre really funny and i really wanna make something similar

Hey all, I've been learning plugin development for my university thesis and built a stem splitter I wanted for my own workflow. It's free, so I figured I'd share it here to see if anyone is interested in also using a stem splitter for vocal mix training or sampling.

It's fully free, uses no large language models so no AI is trained on your data or anything you upload into it, runs fully locally so running it doesn't require any internet.

I had it split stems into either 4 or 6 stems: vocals, drums, bass, melody, and if you need anything a bit more specific you can do guitar and piano. Quick warning, since this is locally ran, the speed of the extraction will be based a bit off your PC performance, but for quick samples and loops it does finish quite quick (if you upload longer tracks you can also split specific loops inside).

I also added some bpm detection and manipulation, as well as key manipulation so you can pitch up or down and speed up or down.

I created a quick promo video for it so feel free to check it out and if enjoy it download it in the link below (windows only for now if you are interested and a mac user please let me know I'll start working on it) :)
https://lisn.digital/

I’ve been producing for about a year and a half and really like those bright prettifun/slayr type beats so have been trying to replicate them. Thoughts on this? Appreciate any feedback

it will either do this periodically or just go dead silent. i dont have any cracked plugins. i tested removing all third party plugins and it will still do this. submitted a ticket a few days ago but jw if anyone here may have some insight 🫰

Wanted to try and make a DNB/Breakcore type track as I've never really messed with the slicer too much in my experience.

Still early on in the development, but do I have something here? Planning on doing some wav form editing after I have all tracks set and synths pads and melodies added to get some harsh stutters and modulation.

Done on FL Studio mobile as for bow I only have my tablet to work with. Thanks for the listen.

Hi everyone, I've been struggling with this issue for months and I'm running out of ideas.I'm using a Focusrite Scarlett Solo 4th Gen and a Rode NT1 Signature Series in FL Studio. Phantom power (48V) is enabled, and I've tried adjusting my gain settings and using different vocal chains.However, whenever I record vocals, the recorded waveform is extremely quiet, almost flat. If I increase the volume or normalize the recording, my voice starts sounding metallic and unnatural.What's really confusing is that a friend of mine has the exact same microphone and audio interface. His recordings sound clear and loud, even when using the same vocal chain as me.I've tried different settings and plugins, but nothing seems to fix the problem.Could this be related to my audio interface settings, microphone connection, Windows audio configuration, or something in FL Studio?Any suggestions would be greatly appreciated. Thanks! 🙏

Hi everyone, I've been struggling with this issue for months and I'm running out of ideas.I'm using a Focusrite Scarlett Solo 4th Gen and a Rode NT1 Signature Series in FL Studio. Phantom power (48V) is enabled, and I've tried adjusting my gain settings and using different vocal chains.However, whenever I record vocals, the recorded waveform is extremely quiet, almost flat. If I increase the volume or normalize the recording, my voice starts sounding metallic and unnatural.What's really confusing is that a friend of mine has the exact same microphone and audio interface. His recordings sound clear and loud, even when using the same vocal chain as me.I've tried different settings and plugins, but nothing seems to fix the problem.Could this be related to my audio interface settings, microphone connection, Windows audio configuration, or something in FL Studio?Any suggestions would be greatly appreciated. Thanks! 🙏

Hi everyone, I've been struggling with this issue for months and I'm running out of ideas.I'm using a Focusrite Scarlett Solo 4th Gen and a Rode NT1 Signature Series in FL Studio. Phantom power (48V) is enabled, and I've tried adjusting my gain settings and using different vocal chains.However, whenever I record vocals, the recorded waveform is extremely quiet, almost flat. If I increase the volume or normalize the recording, my voice starts sounding metallic and unnatural.What's really confusing is that a friend of mine has the exact same microphone and audio interface. His recordings sound clear and loud, even when using the same vocal chain as me.I've tried different settings and plugins, but nothing seems to fix the problem.Could this be related to my audio interface settings, microphone connection, Windows audio configuration, or something in FL Studio?Any suggestions would be greatly appreciated. Thanks! 🙏

Ciao, è da mesi che sto cercando di risolvere un problema con l'audio su fl studio: ho una Focusrite Solo 4th gen e un Rode NT1 Signature Series ma ogni volta che registro su fl anche se ho attiva la 48V, settato tutti i plugin e aggiustato tutti i gain, dopo aver registrato le mie vocal queste risultano bassissime e se tendo ad alzarle o normalizzarle la mia voce si metalizza e suona malissimo. Un mio amico ha la stessa identica attrezzatura ma da lui suona da dio la voce e nonostante ho provato la sua identica vocal chain, le sue vocal dopo esser state registrate suonano meglio e sono alte, a differenza della mia onda sonora che è bassissima quasi piana e la mia voce suona strana. Ormai reddit è la mia ultima spiaggia ho provato in mille modi, grazie🙏

I use individual patterns for Bass, Synths, atmospheres and drums to prevent clutter, so far i've seen no one else do this and i wonder why that is.

It's easier for me but maybe there are some hidden downsides i'm not aware of?

I would also like to know how I can start the recording without showing OBS? I don’t necessarily MIND just editing it out but if there’s a way to only show FL and me pressing play that’d be very helpful!

I’m new to FL and wanted to try and chop a sample but when I try and play it on the Piano roll I can’t hear it. Does anyone know what I need to fix?