All that is missing is a trigger upgrade. Anyone that has upgraded their P10 trigger, who did you go with? I'm thinking about upgrading mine. The stock trigger is pretty amazing but it is at around a 6lb break lol not much travel to the break, the break is clean no roll, great tactile reset - it's a fantastic stock trigger but I'm entertaining upgrading it.

I am absolutely blown away by the CZ P-10 C Ported. I own quite a few guns and I carry one every single day. I have 3 carry guns I rotate between depending on what I’m wearing. Since fall is coming around, I wanted to get another 4” barrel sized carry gun. Something thick and chunky, but not long and hard to conceal. I’ve had my eye on the P-10 for months. Finally I pulled the trigger and let me tell you, I was immediately taken back by the performance of this gun. It was almost unreal how much less felt recoil I feel compared to my other guns with just that one small chunk port. The ergo’s fit my hand like a glove. Like it was made for my hand. When I draw from appendix, the dot naturally lands perfectly centered. It points as true as any gun I’ve ever shot. The slide pulls back smoothly even for not being totally broken in. My lord, and the trigger. The trigger out of the box before break in was crisp as could be. Probably 4.5lbs out of the box. My Glock came with a factory 8lb pull lol. I shot groups the size of a roll of duct tape from 10 yards with .7 splits my first time taking it out. I seriously was blown away by this thing. Best handgun purchase I have ever made. Now I love modding my guns and adding parts. So if you have any suggestions on how I can make this thing even more of a beast, let me know. If you’re on the fence about buying one, do yourself a favor and just get it.

Let’s see some 2 gun setups.

No matter what I do, no matter what I buy, I keep running back to this thing. It’s unbeatable compared to anything else I own. Need to get more ammo to send out of this thing.

* featuring a UV street light.

Picked this up a couple weeks ago. Like new, previous owner barely ran it.
Build list:
• Full CGW Cajun SAO kit
• FDE Cerakote by Black Anchor Tactical
• Slide direct milled for RMR with the low cut for an SRO
• CZ Custom barrel
• Vytal grips and basepad
• Wide paddle safeties
• Holosun 507 Comp
Running TTI +4 mags for 21 rounds. Shot my first match with it last weekend and it's still breaking in. Mags don't drop free yet and everything is tight, but it's new gun stiff, not broken stiff.
Next up is a competition magwell once I confirm basepad fitment.

I’ll leave this picture here just for appreciation.

A few days back I posted on here about wanting a CZ 457 with iron sights and threaded barrel other than the 457 scout. I had no idea about the Jaguar.
This thing is the undeniable best front porch can shooting instrument.

I've had a Cajunized OG P-09 for a while and finally adopted a little brother for her. Since I have plenty of P-09 mags, I created a spacer to use the longer mags in the P-07.

I’m new to CZ pistols! I purchased a CZ P10

This pistol has the hardest slide to rack that I’ve ever owned. However, a few comments referred to CZ pistols as very hard to rack until they have been fired perhaps a thousand times. Also, some have suggested a lighter spring about 13 or 14 lbs. Reading some comments has given me some good ideas about solving my problem!

I have owned Glocks and Amazon has plastic ears that attach to the back of the slide in the serrations! This solves the problem of hard racking. I can’t finding one for the CZ! Has anyone else found any for their CZ? Thanks 😊!

Hey everyone,

I'm looking at getting a P10-C Ported in 9mm (the price is the lowest it's been in months). I shot a few rounds on my buddy's gun, and I fell in love with it immediately.

My concern however is that I've stories about the gun having a tendency to jam. Has anyone had any experiences with this happening? Or is this a problem that a few vocal people with bad experiences?

Thanks y'all!

[Edit/Update] I pulled the trigger on it! pun fully intended. Thanks for the help y'all!

My favorite holster.

For Sale! Ordered for my shadow 2 carry but doesn’t fit. Brass Palm Swell Grips, Magwell, and Mag Extension fit for the magwell. Pretty hefty set. Pretty much brand new, too much of a hassle returning it to Australia so here I am (in the states).

Recent pickups added to my gang of CZ75’s. My Uncle was thinning his collection and gave me first dibs. 75B and 75 Compact. Both full Satin Nickel Finish (my favorite finish!). I have been wanting a Nickel Compact for some time, but never see them for sale. I need to take a new family photo with my other 75 variants soon.

Finally found one, but I can’t find any spare parts or aftermarket stuff, if anyone has any leads let me know

After years of saying Glock was just fine and being told I needed a CZ, I finally listened and bought one. I wish I had listened years ago.

This is my P01.

I plan to carry it AIWB and will be adding a SureFire XC3 light to it soon.

Can you suggest some holsters for me please?

I have seen T1C, ANR & T-Rex suggested in older similar posts but have heard mixed reviews of T1C and ANR wants 7 weeks.

Also, is there any reason not to have CGW work on it if I plan to carry it?

Thank you.

Recently got my first handgun (P10F OR) and absolutely love it. I figured a smooth shooting striker fired full size was the way to go for HD/Range and it absolutely has exceed my expectations. Now I'm hooked and want to get a hammer fired next (still for HD/Range but potentially EDC one day down the road). I'm already brand loyal to CZ and wondering what my new friends here would recommend for my first. It's tougher to find good hammer fired pistols to rent at my local range, so likely will be going on dry firing and recommendations. Thinking $600-$800 max unless there are certain older models that hold up really well that I should be looking for used. Really appreciate the help!

Finding a duty holster for the P10F can be tricky, so I wanted to demonstrate my current setup with the new red dot.

The AEMS Micro is attached to an Athena Precision ACRO plate. The plate was not compatible with the spacer included with the optic. The optic itself was not compatible with the optic hood, but removing it was easy and I honestly found it to be more trouble than it's worth.

Any questions let me know and I'll answer as best as I can.

I have a Cz p10f non OR and am looking into getting the slide milled. Most companies I see range from 125-200 dollars for the service but I saw you can get a whole new slide for 150$. Wouldn’t it just be better to get the new slide at that point?

Hello all. I need some opinions. I just got a used SP-01 tactical I have not shot yet. It needs a little work i.e. new guide rod, slide stop etc. I am planning on istalling a CGW pro package and any other needed parts and accessories, as well as having it milled for an optic and cerakoted. Should I upgrade/repair it first or have it milled first. Please let me know what you think. Thanks all.

Edit: Thank you all for your responses they have helped me solidify my plan for this one. I ordered the parts from CGW. I'm going to get it shooting stock, then send it to primary machine for the Harbinger milling package and have the frame re-finished at the same time. When it comes back I may keep it stock for a bit to use/test with the optic, last will be the pro package install. I'll post pics of the final transformation.

ODG Shadow 2 Compact