New to me little shooter, what option do I choose when ordering parts for this gun?

I dont know what option to check on CGW website, would I just choose CZ75 internals?

I only assume this isnt a ''b'' or ''d'' because it dosent say it obviously,

But I want to order correct pieces.

My new CZ Shadow 2 .380

Yes, I’m in Mexico 🇲🇽

Greetings ✌🏽

This is not my design/work but ever since I saw it here a while back I had to have one. I think his username is

u/someguymakething. I tried to print my own without any success. And I found a website that would print it for me out of ABS and they feel great. Other than a gap in the front of the grip seam they feel and look great!

My first firearm and I am absolutely thrilled. Spent a lot of time and money at the local ranges renting every 9mm I could get my hands on. Ironically no one had any CZ's. But through process of elimination, reading the countless positive reviews, and lots of dry firing at the local gun shop I took the leap and got me a P10F OR. It is truly the perfect first firearm for me. Have about 500 rds through it and the slide and trigger seem to be getting smoother with every round. 3 more 19 rd mags getting shipped as we speak. Probably will be looking for an optic next and will take a deep dive searching on here for recs. Next up likely a P10C ported for EDC. It's true what I've heard...the addiction is real! Happy to be one of us!!!!

I’m having an issue with my Shadow 2 where the hammer won’t drop after pulling the trigger sometimes. It’s like I hit a wall when I pull the trigger. When I reset again, the hammer finally falls. What’s worrisome is that it’ll sometimes send a round when I let go of the trigger (unintended binary?). I didn’t get it doing it on the video unfortunately to help further show the issue. It’s been a dream to shoot up until now so I’m guessing something finally gave out.

Absolute banger.

I'm trying to complete a (CGW) SAO conversion on my Shadow 2. After finishing the install, the trigger was sitting way too far forward in the trigger guard (as shown in the attached picture) instead of hanging straight down so I took it back apart.
It passed a basic function test perfectly fine after the install, but there is a massive amount of loose take-up before hitting a soft wall. After the conversion, I was expecting a very short pre-travel with a crisp, immediate break. I'm wondering what is causing the trigger to rest this far forward. Could it be an issue with how the reduced power trigger return spring is seated? I’m also thinking it may be due to the pre travel set screw, the threads looked off and I’m not sure it’s even contacting the frame. I did remove the disconnector.

Any tips or suggestions would be appreciated, thanks

Just got my P10C back from stippling, luckily the same thing my TXC holster for it came in. Took it to the range and super happy to add to my EDC rotation. Just waiting on my P07 holster to come in from another post I made on this subreddit.

Im not super sure this is the right place for this question but here it goes.
So I was in a gun shop the other day and found a New CZ Duty it fit my hand amazingly well, so without any research at all I bought it. I have since done some research and heard that CZ teamed up with holster manufacturers including Safari land. But I have not seen or heard of one holster out in the wild yet.

Does anyone know where I can acquire a Good Quality holster for this new weapon? I’d prefer a Hybrid style with double belt hangers.

Thanks yall

Anyone know where I can get one? I ported mines and I'm not really a fan

Basically the title. I have a cz 1012 hunting shotgun that I enjoy very much and I’d like to know where to get custom parts for it like a pistol grip among other things. Thanks in advance.

When you mate a Nocturne F to a P10F… you get the Duty. My first impression was, “This feels good”. I really like the texture and if felt substantial in my hand, not cheap at all. I love the mag release and texture in front of the take down is great. The texture feels similar to a Nocturne. I get what several have said about the trigger… not good. To be frank, it’s quite subpar compared to some other strikers, namely Canik and even S&W 2.0. While it is a Duty gun not a race gun, it was almost impossible to shoot fast on a bill drill. I did not have my timer but I did not need it to know that fact. It was very gritty and a long take up and long reset. It was accurate even for a poor shooter, like myself, at 7 yards. Zero failures in 100 rounds (which is more than I can say for my first Nocture C). It’s a solid gun and I am happy to own it… I paid $557 out the door and thought I got a pretty good deal and decent value. My hope is that the trigger will improve with time and use. I do feel that by the time I had shot 5 mags through it, I really was getting comfortable with it. Ask me anything.

Took it to the range today and fell in luv. Damn it shoots nice. Even my itty bitty wife was shooting straight and on target whereas she can’t shoot my Glock worth a crap.

Here's a question, I'm looking to buy a Speed Beez CZ75 mag loader but so far I can only find them in the US on their own website and they declined my credit card because (even tho it's a VISA card) it's not a US card.

Does anyone have any idea how to buy one from Europe.?

These grips are amazing the click into place so tight and I have never felt aftermarket grips that feel so OEM and premium

I recently picked up a CZ Duty. I feel like the quality of most of the striker fired pistols on the market has been a race to the bottom. The CZ Duty’s emphasis on durability and longevity caught my attention. I’ve yet to put rounds through it. However the build quality is impressive. Every spring, channel, and wear surface seems to be overbuilt.

The only issue I seem to be struggling with is optics mounting. When Glock changed their mounting interface there were a lot of reports of RMRs losing zero and being unable to zero. I’m having the exact same issue I had with the Glock Gen 6 on my CZ Duty. The front posts are not flush against the slide. When I mount an RMR there’s enough deflection at full torque that I literally cannot lower the dot far enough to bore sight the gun. I think the front posts are putting too much upward pressure on the front the of the optic.

I finally managed to mount an RCR to spec. This doesn’t deflect as easily so you can actually see the light under the front of the optic.

I picked up the new CZ Duty and thought I'd share my thoughts about it vs. the other CZ polymers.

Overall, I really like the Duty, the trigger is a bit gritty and creepy but it is easy to shoot well and I'm sure it will be popular with both military/police procurement departments as well as with us civilian enthusiasts.

I compared it with the P10, P07, and the Nocturne.

I liked the Duty's grip better than the others, probably because it is slightly longer (17 round mags vs 15 for the others), which also helped it to be the best at handling recoil.

The slide stop is easy to reach without shifting my grip (unlike the P07 and Nocturne), and unlike the P10, it is only slightly stiff and doesn't sit right where my thumb wants to be. ( I hate, hate, hate the P10 slide lock).

Accuracy is great. The front site is quite large, so it is tough to be precise, but it is easy to shoot well. My first ever 3 rounds out of the gun were a clover leaf inside the bullseye (the 4th round isn't important, so don't ask).

The trigger is gritty out of the box but noticeably got smoother after the first few magazines. I think the P10 trigger is slightly better, but I found it easy to use and expect it to keep improving. The P07 trigger is MUCH better, but I've got thousands of rounds through that one. I rated the Nocturne trigger as slightly worse than the Duty, but both have limited use, and I think with time, the Nocturne will eventually come out ahead.

If you're going to buy one and only one CZ, get the Shadow 2 Compact. But, if you're looking at the polymer options; I'd happily recommend the Duty, and I'm really looking forward to seeing what aftermarket options become available.

Bought my first ever firearm ever in March of this year. A P-09C Nocturne. After seeing all the buzz about the P10C ported, and seeing the grey frame on the COA model, I had to go for it! Traded in my Nocturne for the P10, glad to stay in the CZ family.

Hello,
Could you please recommend aftermarket sights for P10C ported? I read somewhere that Sig #8 sights?
I would like it to 1/3 cowitness with the COA. I would really like to have front fiber black rear like TAG Precision or Dawson offer. Thank you

Ready for whitetail opener !

Anyone running a RMRCC on their P10C? If so can you post a few pics? I have a RMRCC without a home so I’m debating putting it on the 10C.