I’ll leave this picture here just for appreciation.

I have a Cz p10f non OR and am looking into getting the slide milled. Most companies I see range from 125-200 dollars for the service but I saw you can get a whole new slide for 150$. Wouldn’t it just be better to get the new slide at that point?

For Sale! Ordered for my shadow 2 carry but doesn’t fit. Brass Palm Swell Grips, Magwell, and Mag Extension fit for the magwell. Pretty hefty set. Pretty much brand new, too much of a hassle returning it to Australia so here I am (in the states).

Picked this up a couple weeks ago. Like new, previous owner barely ran it.
Build list:
• Full CGW Cajun SAO kit
• FDE Cerakote by Black Anchor Tactical
• Slide direct milled for RMR with the low cut for an SRO
• CZ Custom barrel
• Vytal grips and basepad
• Wide paddle safeties
• Holosun 507 Comp
Running TTI +4 mags for 21 rounds. Shot my first match with it last weekend and it's still breaking in. Mags don't drop free yet and everything is tight, but it's new gun stiff, not broken stiff.
Next up is a competition magwell once I confirm basepad fitment.

Recently got my first handgun (P10F OR) and absolutely love it. I figured a smooth shooting striker fired full size was the way to go for HD/Range and it absolutely has exceed my expectations. Now I'm hooked and want to get a hammer fired next (still for HD/Range but potentially EDC one day down the road). I'm already brand loyal to CZ and wondering what my new friends here would recommend for my first. It's tougher to find good hammer fired pistols to rent at my local range, so likely will be going on dry firing and recommendations. Thinking $600-$800 max unless there are certain older models that hold up really well that I should be looking for used. Really appreciate the help!

My favorite holster.

Finding a duty holster for the P10F can be tricky, so I wanted to demonstrate my current setup with the new red dot.

The AEMS Micro is attached to an Athena Precision ACRO plate. The plate was not compatible with the spacer included with the optic. The optic itself was not compatible with the optic hood, but removing it was easy and I honestly found it to be more trouble than it's worth.

Any questions let me know and I'll answer as best as I can.

As title states, was cleaning the gun and found the housing cracked at the screw… ok, no problem, looked up CZ customer service and called..nope the don’t have them. Tried the websites they suggested, they did not have them either… can not find them anywhere.. so my 452 is now useless..and I really liked this rifle.. it was on the money out of the box.. any suggestions?

Recent pickups added to my gang of CZ75’s. My Uncle was thinning his collection and gave me first dibs. 75B and 75 Compact. Both full Satin Nickel Finish (my favorite finish!). I have been wanting a Nickel Compact for some time, but never see them for sale. I need to take a new family photo with my other 75 variants soon.

Finally found one, but I can’t find any spare parts or aftermarket stuff, if anyone has any leads let me know

Hey everyone,

I'm looking at getting a P10-C Ported in 9mm (the price is the lowest it's been in months). I shot a few rounds on my buddy's gun, and I fell in love with it immediately.

My concern however is that I've stories about the gun having a tendency to jam. Has anyone had any experiences with this happening? Or is this a problem that a few vocal people with bad experiences?

Thanks y'all!

Hello all. I need some opinions. I just got a used SP-01 tactical I have not shot yet. It needs a little work i.e. new guide rod, slide stop etc. I am planning on istalling a CGW pro package and any other needed parts and accessories, as well as having it milled for an optic and cerakoted. Should I upgrade/repair it first or have it milled first. Please let me know what you think. Thanks all.

Edit: Thank you all for your responses they have helped me solidify my plan for this one. I ordered the parts from CGW. I'm going to get it shooting stock, then send it to primary machine for the Harbinger milling package and have the frame re-finished at the same time. When it comes back I may keep it stock for a bit to use/test with the optic, last will be the pro package install. I'll post pics of the final transformation.

I am absolutely blown away by the CZ P-10 C Ported. I own quite a few guns and I carry one every single day. I have 3 carry guns I rotate between depending on what I’m wearing. Since fall is coming around, I wanted to get another 4” barrel sized carry gun. Something thick and chunky, but not long and hard to conceal. I’ve had my eye on the P-10 for months. Finally I pulled the trigger and let me tell you, I was immediately taken back by the performance of this gun. It was almost unreal how much less felt recoil I feel compared to my other guns with just that one small chunk port. The ergo’s fit my hand like a glove. Like it was made for my hand. When I draw from appendix, the dot naturally lands perfectly centered. It points as true as any gun I’ve ever shot. The slide pulls back smoothly even for not being totally broken in. My lord, and the trigger. The trigger out of the box before break in was crisp as could be. Probably 4.5lbs out of the box. My Glock came with a factory 8lb pull lol. I shot groups the size of a roll of duct tape from 10 yards with .7 splits my first time taking it out. I seriously was blown away by this thing. Best handgun purchase I have ever made. Now I love modding my guns and adding parts. So if you have any suggestions on how I can make this thing even more of a beast, let me know. If you’re on the fence about buying one, do yourself a favor and just get it.

Took off my virdian rfx 15 an olight

An added a holosun pid 1000 lumen

An holosun eps core!