Just turned 47 and always wanted to start inline skating. I have two boys that somewhat skate and are better than I am. I am glad to be part of the group now, but I am super apprehensive of falling and hurting myself. I am still scared to learn how to stop properly but trying to get small wins every time I put these on.

This started as my trying to learn the 3 turn thing, but I'm stuck

for context, ive been a quad skater for about 2 years, but im not the best at it. cant do any tricks and struggle with balance sometimes but i can at least skate around for a few hours without falling. im interested in trying inline skates, but im terrified of moving weird and breaking my ankles 😭😭 how hard are inline skates to learn?

Hi all, I'm Laurie from Brighton in the UK. I've been skating for about 16 years, but never anything long distance until this month, when I decided to skate across the whole of the Netherlands. Scheveningen Pier on the coast to the German border near Enschede, about 239km over a few days.

I filmed the entire trip and I'm turning it into a series on YouTube. Day 1 is up now, 80km from Scheveningen to Utrecht with no training, a flight at 4am and a lot of Dutch cycle paths: https://www.youtube.com/watch?v=pyw7XFVpSj4

I did the whole thing on my Rollerblade Twisters and honestly they were amazing. People tend to think of them as a city skate, but they handled 80km days, smooth tarmac, cobbles and rain without any trouble and got me all the way to the German border. I'd use them again in a heartbeat.

The surfaces are mostly a dream. Smooth red tarmac that goes on forever, and some stretches along the dikes are basically skating heaven. Then a village hits you with full cobbles and you're rattling along at walking pace. My navigation app kept sending me down the worst cobbled routes possible because it thought I was on a bike.

The backpack was the big lesson, it absolutely wrecked my shoulders. Pads and wrist guards stayed on the whole time though.

It was honestly one of the best things I've ever done on skates, and the next episodes are on the way.

Has anyone else done long distance on Twisters? And how do you carry your kit without destroying your shoulders? I want to do a bigger country next. I'm thinking South Korea

Kind Regards Laurie

Hey everyone! I finally got my first pair of brand-new skates, the Powerslide Zoom Pro 80 Torelli, size 37–38, and I'm trying to figure out whether they just need breaking in or whether the fit is wrong for my feet.

For context, I got the recommended size on the size guide. My previous skates (some Powerslides again) were secondhand AND a size larger, so they were already broken in and ofc they felt too roomy because of the size.

This is my first time wearing a brand-new pair of my size, and I'm not sure what a fresh boot is supposed to feel like!

Here's what's happening:

• I have a very strong pressure point on the top-inner side of my foot, around the instep.
• The first time I tried them on, the pain was genuinely unbearable. The next time, it was more manageable, although the pressure was still there.
• I also experienced slight tingling at the tips of my toes (it then became numbness lol).
• Interestingly, removing the insole made the pressure on my instep noticeably better.

My toes touch the front of the liner, but they aren't painfully curled, just normally touching, so lengthwise I guess I'm ok. And yes I didn't tie them tight.

I even asked Nicola Torelli himself (who was super kind and helpful! 🥹), and he said that normally new skates shouldn't hurt but sometimes it can happen. He recommended heat molding the liners and then eventually breaking them in. I'm now also waiting to hear back from Powerslide as well before deciding what to do.

I know that snug skates are normal, but how snug is normal lol.

Any advice would be appreciated!

Hey everyone sorry if this question has been run into the mud. I am looking for a specific answer and not finding it. My boot size is US 7/7.5 twister xt. A friend gave me these endless frames with 90 mm to try. I’m a newer skater. I’m interested in wizard style skating and urban skating in Boston. I didn’t have balance issues with the stock frame and 80s if that is at all helpful. So in your opinions what set up is best. One is clearing more balanced yet favors the front a bit and the other obviously favors the back. Thank you so much in advance.

You may have seen my post the other day. I’ve got two sessions in so far. They’re super comfortable, they’re fast, and roll over anything in their way. The trail I’ve been skating goes through the woods and they haven’t had a chance to clear all of the foliage debris, not even an issue. If you’re looking to cruise around and you have some good experience on skates I highly recommend these Powerslide Next 2.0 125’s. I’ll post clips when I get a chance to hit the road at night. Thanks y’all!

It's been a couple of weeks since these skates have been popping up everywhere. People are going crazy about them, but imo they look like cheap, plastic skates from amazon. Opinions?

if you need wrist guards that fit ur apple watch or any watch these are perfect
for reference im 5’9 1/2 151 lbs i got a large. med could have prob fit but i think the larger size helps w the watch and thats all the store had but it fits great no complaints and i can still control my music.. comfortable and cheap and solves all my issues. ive tried on like 4 other pairs two from triple 8 and two from 187. these were the better option by far for the watch.

What color wheels and laces would you go with?

Flying Eagle X3 Shrike vs Flying Eagle F5S Eclipse

I started skating this month and have been going about 3 times a week for an hour each session. I track everything on Strava, and I’m now getting close to 5 miles per session, which feels like a pretty good accomplishment!
For now, I’m focusing on getting comfortable on my skates, improving my positioning, and learning how to stop. I haven’t started practicing other moves or going down hills yet because I’m still building my confidence.
I’m curious how other beginners approach skating. Do you practice for a set amount of time, aim for a certain number of miles, or just skate until you feel tired? Do you follow a routine or just go out and skate?
Would love to hear what your practice sessions look like! 😊

I just received the Wizard General Purpose skates, and these are my first carbon shelled boots, so I have a few questions.

• Should there be some discomfort in the upper cuff area? Maybe needs to be broken in, or maybe that's just something I need my body to adapt to?
• Should they be pretty "squeaky/creaky" when bending my knees/ankles or twisting?
• Should my toes be quite uncomfortable at the start? I know they were somewhat painful with the Aeon and Twister 90's when I first got them, but that broke in, these feel slightly more painful.
• Will the Intuition liners become less compact/folded with wear, there is an odd fold/crease in the bottom of the left liner - I assume so, just odd that its here when new.

Overall the skates look and feel quality, excited to take them outside, but want to make sure a few of these things are "correct" before rolling them outside.

Hello! I'm a total beginner and I'm planning to set a goal for my skating to motivate me to practice. I haven't skated in over 4 months and i only know how to go forward and i am not very physically gifted. What would be a realistic goal i should be able to reach within 6 months? Ideally some moves and the amount of them that i should be able to master within that time.

Hi - Essentially just the title.

The last time I rollerskated/bladed was in elementary school, so I have effectively zero experience.

Ideally I don't want to spend too much. Anywhere between $50-$150 is fine (though I'm not sure how much good pairs really cost) especially if they will last me a good while. I already have a helmet and I probably will also buy elbow/knee pads.

I would be mainly skating on sidewalks/roads, but both vary a lot in my city. Mostly will be rough surfaces. I don't plan to take them to a park at all.

I'm basically sedentary save for my job. I walk anywhere between 4-8 miles and am anywhere between 10k-20k steps per shift.. In terms of intensive exercise, again I am sedentary.

My main goal is to have a more fun way to get to around my city. I don't live far from my job or my university and using my car for literally everything feels really wasteful to me. I also want to be more physically active. I often fall into the trap of beginning something like running/weightlifting/calisthenics but don't have the discipline to keep up.

I have a local Scheels (they have some but I'm not sure if their selection is what I want to be going for). I don't mind ordering online elsewhere and having them shipped though.

Thank you for your time.

i have the stock twister edge bearings im looking for alil more speed and have 80mm 85a hydrogen wheels theyre newly installed i dont wanna change the wheels. i was thinking of getting the rollerblade hydrogen ceramic bearings is there anything better or similar and cheaper. any advice would help

Seems like it could pop at any moment, picture 2 is when it's tightened.

I know I can buy a replacement, but I got these like 2 months ago and I've been loving them (maybe a bit too much). I'm not in a place to pour more money into them at the moment. What can I do to increase their longevity at home?

Took me four attempts. Its still a bit snug, but i figure that's what i want. It ratchets perfectly and everything. This is my first thing Ive designed myself and it works. Im still stunned.

Hi all,

I learned to rollerblade during COVID (as many did, I'm sure), loved it, and got to an intermediate/advanced level, but fell off during college. I got back into it my senior year, refamiliarizing myself, and now that I've recently graduated, I'm looking to get back into skating, mainly on urban trails!

The only thing is I've had the same beginner Oxelo FIT500s for the past 6 years! They served me well (no super crazy tricks, but definitely doing fun things), especially for the price point, but the wheels are so worn down, and I need more ankle support (I think I have small ankles!).

I did some research on this sub, and I was thinking of these (price is still a factor!):

Rollerblade MACROBLADE 84 BOA W

Rollerblade Macroblade 90W

Flying Eagle F6S FALCON Inline Skates

My current frames are 4x80, which I think is a comfortable speed, but wouldn't mind trying out like 4x90. If anyone has any thoughts or other suggestions, they would be so appreciated!

Thank you!

They have an integrated liner and slim profile that seems great for fine control like one would want for slalom and urban freeskate stuff without the bulk of hard boots that I don't need as someone that doesn't do jumps or anything.

They aren't carbon fiber shells, so they're cheaper than a lot of slalom options too. My main concern is that the cuff is not hinged, so I'm not sure how flexible it is. I am a solid intermediate/advanced skater working mostly on perfecting slides rn, so I don't need a ton of ankle support, but having some is nice.

Let me know your thoughts if you have tried them!

This thread is for people to share their experience with the combination of Rollerblade Twisters and Intuition liners.

Are you happy with this setup? Would you suggest it for other people? What sorts of skating have you used it for? What is your foot size and what size Twisters/Intuitions fit you? Suggestions/tips?

I'll go first in the comments section...