Greetins everybody.
My Jonsbo Z20 arrives tomorrow, but I need some help.

I'll be running 4 DDR4 Corsair Dominator Ram sticks, they are very tall so there's limited clearance for an air cooler, that means I'd have to go with a 240mm AIO.

There's also another issue, my MSI Ventus 4080 is too thick for me to add bottom fans!

I'll be limited to:
-Two Top Fans (AIO)
-One rear Fan

Will I be okay by just running the rear fan as intake, and two top fans exhaust?

Thanks in advance!

A fresh build for a customer in Glasgow:

Pc case: Lian Li A3 White wood

MB: Gigabyte Aorus B850 Ice

CPU: Ryzen 7 9800x3d

Ram: Klev 32GB 6000

GPU: Powercolor 9070XT Red Devil Spectral White

PSU: Lian Li SX0850P

SSD: Samsung 990Pro 2TB

Cooler: Thermalright Assassin X 12

Fans: 5x Thermalright Slim

Originally was a matx pc, with a different case, cpu cooler and gpu. Slowly changed parts and ended up here now with the Jonsbo V12, 9070 (non xt) and jonsbo CR-1400 DV2 cooler (90mm fans).

The gpu is 288mm, more than what the case manufacturer suggests. With the 2nd intake fan removed, and with the front panel unscrewed and bent back, I managed to place the gpu inside.

Tried to use a 120mm aio for cpu, but with matx motherboard, the 24-pin connector was on the way for the radiator, so ended up going with this cooler. In the end really happy with how it came out

Built this is April 2026, but just changed the AIO and the Goku was recent.

CPU: 7800X3D, was a 7600x but then scored the X3D for a steal (July).

GPU: 4070 super

RAM: 16gb Ram - Green sticks, with some cheap Aliexpress black heatsinks. 4800mhz CL40, but since it’s Hynix overclocked to 6000mhz CL36. That was expensive (120 euro used), but wish I got 32gb if I knew they would go even higher. My previous PC which I sold nearly 2 years ago (moved country) it was 150 euro for 32gb 5600mhz CL28 Trident NEO RGB.

Storage:

• 980 pro 4TB - Had this already thankfully, took from Laptop, which was in my previous PC.
• 980 500gb - From an external ssd enclosure I no longer use, solely for OS and non gaming apps.

Motherboard: Asrock B850M Riptide

PSU: Corsair RM850e

AIO: Corsair Nautilus RS 240 LCD

FANS:

• Asia Horse Dawn Reverse (3 x 120mm, bottom), they clip together like Lian Li
• Artic P12 Pro RGB (Rear exhaust)
• Artic P12 Pro (You don't see but at front, slits on the side of panel for air to go in) - Maybe chockes a bit still, but these have high static pressure.
• Corsair RS120 fans x 2 (The AIO fans, that it comes with

Put some plastic bed risers from amazon on the feet which gives it 3-4 cm of extra height so the bottom fans can breathe.

Some used parts, obviously Case, Fans, PSU, and AIO were new.

Motherboard was Amazon refurbished

GPU was refurbished from Coolmod (Spain)

CPU was a refurbished/tray CPU I think, looked mint.

In the end the build cost 1150 euro (without storage)

Thank you to Gemini for summarizing the comparison results .

Has anyone tried installing Assassin VC Elite (or Assassin IV) and an AM5 matx mobo on Jonsbo Z20.

I know the official spec's max height for AM5 is 163mm, but does anyone actually tried?

I searched for videos or photos, and only found people claiming via text that it fits. I'm happy to confirm that the noctua nh-d15 g2 does indeed fit the Lian li a3.

The fans also fit perfectly without adjustment needed using team group t-force Vulcan memory.

Sorry for the messy wires, I still need to finalize the adjustment in my build.

I know it’s a little big but I loved the h4 flow so I’m glad I could shrink my footprint down a bit.

Parts/specs:
9800x3d
MSI inspire 3x RTX 5080
32gb Ripjaws s5
Aorous Elite B650m
Corsair RM1000x
Arctic Freezer iii pro 240mm
7x Noctua Chromax NF-A12x25
5in. Turzx Smart screen

Im getting closer to buying what i need for a d32 pro build. Right now i have a 7600x and 4070 super fe and i dont really plan on upgrading the stuff any time soon, just need to downsize the b650m asrock atx mobo to an matx one.

Online the price seems slightly lower for the pro rs b650m compared to the b850m but not by much, however the reviews for the latter feel a bit more shaky/divisive compared to the former. Furthermore, my local pc store has the pro rs b850m in stock for 130 dollars

Should i be patient and order a b650m online or is a b850m locally much better? Mainly worried about all those horror stories of cpus being fried. Mine doesnt seem to be one of the included ones and bios updates SHOULD prevent bad shit from happening but u never know

Considered other motherboards obviously like the mortar and aorus but their vram heatsinks would likely hit my 240mm AIO on top and im not really overclocking or doing that sorta thing anyway

The CH160 Plus was out of stock, so I bought a CH170 Plus and turned it into a CH160 Plus myself by adding custom feet and a pull handle.

Specs:

CPU: Ryzen 9 5900XT

Motherboard: MSI B550M PRO-VDH

GPU: ASRock Challenger RX 9070 XT (triple-slot)

RAM: 32GB Kllisre DDR4 3200MHz, overclocked to 3400MHz

PSU: Corsair CX750, 150mm, non-modular

CPU Cooler: 240mm AIO liquid cooler (also a 80mm intake fan at the front lol)

Storage: 512GB XPG S40G NVMe SSD + 1TB KingSpec NX NVMe SSD

Wi-Fi: Intel AX210

I'm mesmerized by how such a compact case can fit a full-size ATX PSU, a triple-fan, triple-slot GPU, and a 240mm AIO. And considering I'm using a non-modular PSU, the cable management turned out better than I expected,

I'm planning on building the Thermalright TL-M10 and I have a 240mm radiator basically gathering dust (Deepcool LE 240 V2) and I wanted to get some use out of it. However I'm curious, if I use the 240 mm radiator could I still fit a 120mm fan beside it. And I know 240 + 120 = 360. But the actual size of the aio is 282mm. So can I fit the radiator with a 120mm fan beside it or do I have to get a 360mm rad.

Finally got my definitive PC for at least 2 years
I like to invert the case position switching the feets when i get sick of it
Btw, this airflow works perfectly?
Based on the first photo:
top fan: exhaust
side fans: intake
bottom fan: intake

Hardware conditions in Brazil are not so good for upgrades, so ill stay a bit with this config.
Ryzen 7 5700x, ZOTAC RTX 5060, 32GB 3600 (4x8GB)

It’s a tight fit but it works flawlessly. I first tried with a arctic lf3 but the radiator was too thick for my mb and ram combo.

Hey all,

I've been exploring mATX lately and was wondering what cases ya'll would recommend I check out. I'm creating a birthday/ christmas wishlist for friends and family, and I usually throw in a new case or two in there since I like to refresh my PC case at least once a year, sometimes more often.

As mentioned in the title, I've used the Gamdias M4M, which is the first mATX case I owned, and now I'm on the Lian Li B4. Ideally I'd like to check out a case that is similar in size to the B4 in terms of length and width, as it's the best fit for my desk given everything else I have on it. Height doesn't really matter too much, and I'm flexible on PSU as well. I own both an ATX and SFX PSUs, and I've noticed that some cases will let you use either, like the B4 while others might only let you use one or the other

Hi all! I Have Lian Li A3 and want a smaller PC like Lian Li B4 (26.3L vs 21.3L.
My hardware:
Gigabyte Aorus X870M (mATX)
AMD Ryzen 9850X3D
Gigabyte RTX 4090 GAMING OC (340 mm length)
Arctic Liquid Freezer III Pro 360
Cooler Master V850 Gold SFX

Can this components fit in lian li B4? thanks!

After I wrote half of this post I decided to check the shopping apps. A3 wood black with glass panel is now in stock. But I'll wait until the sale period first anyway.

As the title said. I bought everything to build a PC except the case. This specific case was Lian Li PC-7 Plus from 2006. Got it for free because my dad's workplace was throwing this away.

The case actually comes with a 3rd gen Intel build inside. But I've moved it somewhere else long ago. And this becomes an empty case for a couple of years

Here's the specs so far of what I built into this "temporary" case :

-Ryzen 5 7600x

-Asus B650m AYW-Wifi

-CXMT 16gb DDR5 5600 (generic green stick)

-Manli Gallardo RTX 3050 8gb (Given to me for free by a family member)

-PNY CS2241 500gb gen 4 nvme (bought from a friend of mine for $15 before the price went up)

-Some wd 1tb hdd because all my data is there since when I use a laptop

-Thermalright Peerless assassin 120se

-2x stock fan that comes with this case

-Cooler Master G650M

The temps are fine. Roughly 70c on both cpu and GPU.

The RTX 3050 is definitely the weakest part of this pc. I'll definitely upgrade it in the future but it'll do for now.

Also this specific RTX 3050 has a bright blue light that can't be disabled by software at all.

Cable management doesn't matter because it's a temporary setup.

Anyways, I just want to show a 20 year old case with a modern PC inside.

I retired earlier this year so I decided to replace my current AM4 build by building a solid AM5 build. My last build was using the NZXT H1 and I found it too restrictive and too proprietary. I chose the Lian Li A3 case for my new build and included the following:

Lian Li - A3- mATX-WD Black Wood Front Panel

ASUS ROG Strix B850-I AMD AM5 ITX BIOS 1805

AMD Ryzen 9950X3D 16 Core-32 Thread

PNY GeForce RTX 5070 Ti Slim

64GB G.SKILL Flare X5 DDR5 6000 MT/s

CORSAIR SF1000 SFF Power Supply

upHere 360mm All-in-One Computer Case Fan

Thermalright FW PRO 360 Black AIO

4 TB Samsung 990 PRO NVMe M.2 SSD

And I'm running CachyOS

Granted, the A3 doesn't offer much in the way of cable management but I'm pretty happy with how it turned out.

I guess 24L should be okay with local rules. Moved from Macube 110 green.

• i5 11600K
• B560m Aorus Elite
• 4070 Asus Dual OC
• 32GB Goodram IRDM RGB DDR4
• Be quiet! Pure Rock 2 FX
• Darkflash C7, 5*120mm

A3 was out of stock at microcenter and saw this. I really like the form factor vertical. Was Sort of a pain jamming everything in there but it was worth it! I5 12400f, 32 GB DDR4, MSI 5070, 120mm aio, 5 120mm case fans. Might be unpopular but I think this is a better case than the A3. Update: cpu is at a cool 60°C and GPU sits at 71°C when gaming

Had been searching for a sleek little tower case to fit in the small corner of my desk and settled on the Jonsbo Z20 after some deliberating between that and the D32.

I don’t have a huge GPU nor a big AIO cooler so everything fit pretty snugly inside, and tried my best in shoving the cables behind the PSU. Think of adding a rear exhaust fan at some point too.

First PC build was about a decade ago with a GTX 950, and now I have an Arc b580! Not exactly high-end but with the current prices, I had to make do.

Cable management was a bit of a pain in the ass, but finally ended up with something I'm happy with. It's been so much fun going through my backlog with this baby (currently replaying Control in preparation for Resonant)

Hey everyone, as the title says I am unsure what dual chamber “fishbowl” style case to get. I have been looking at the Lian Li 011D mid tower for a minute. A buddy of mine suggested the Phanteks Evolv x2 and the Antex C8.

For reference I want to be able to mount an Artic III 360mm radiator at the top, 3 120mm fans as an intake on the side, 3 120mm fans as an intake on the bottom, and 1 140 or 120mm on the rear. For fans I am pretty set on going with the Lian Li SL line, specifically the LCD model for the side intake so I can display some details but I’m
willing to give this up to save some money. I currently have a 4070 graphics card and a standard ATX motherboard. Budget I’d prefer is 100-150, but willing to go 150-200 if the case is worth it in quality and can handle further upgrades.

Any help is welcome and appreciated. Thank you all!