I’m so sorry for the title, please excuse me

2020 ct5. Driver side door won’t open from outside. All other doors open from the outside. The door will open if the lever is pulled from inside. Windows work and everything. It happened about a month ago and corrected itself until today. I’m thinking possible actuator issue or maybe the little “trigger” on the backside of the handle isn’t striking correctly anymore. Has anyone else had this issue and found the fix? Thank you in advance.

Found in my maternal grandmother (1926 - 2010) photos. No clue who the guy is or what year or model this is. Thought I would post.

I picked up my 2026 CT5V Blacking typhoon / tan a few months ago. I love the drive. It came with some creases on the brand new leather. Dealer said give it a few months of wear / heat and it will go away. Well, it didn't instead it got worse. So I came back, dealer requested new leather bottom covers from Cadillac and GM approved. This is how I picked up my car today. I cannot believe this is acceptable on ANY new car let alone a 100k+ new car and specifically a car I paid 8,000 dollars for this specific leather option. I spoke to the service manager, he took it back and said they will work on it some more but this is normal for leather replacements and he doesn't think there will be a significant improvement with a heat gun. He says the leather attachments are not modifiable and he has seen this before. He does not have any other recommendations. I am completely disheartened by this and I do not want the car back like this. I am not being picky this is ridiculous. If they can't fix it (and they don't think they can), I guess I will pay for a automotive upholstery shop to fix this out of my pocket, which won't be cheap. But it will be my last GM product. There is zero chance an M5 or E63 comes new with leather creases or leaves the shop like this after replacement.

Hello, I'm looking at a cadillac out of pure coincidence as while looking for AWD/4WD vehicles and I found the CT5 was a really nice to drive (and in my budget).

I was wondering about the reliability of the 2020 model with the 2.0L 14 F DOHC 16V engine with about 85k miles. It has a good Carfax and is supposedly a great value at about 24K. Its CarBravo certified as well. However I have heard these cars can be driven hard and can lead to problems for later owners.

Do these end up in the shop often and are the repairs typically expensive? Any advice is appreciated!

I first bought a 2025 Cadillac Optiq but have always wanted a ct6, so I bought a 2019 Cadillac CT6! Went from driving Mercedes to Cadillac’s!

So im about to buy this 2006 Cadillac CTS with the 3.6L V6 engine with 134,000 miles on it, and want to know if im making a good purchase as i know little about cars. So the seller just replaced the timing chain and water pump. Besdies that he says nothing was wrong with it. It has one small rust spot by rear wheel, interior is in good condition and no body damage. He wants 3K. Anything in particular I should ask seller or look out for before i buy this? Any pointers would help! Thanks everyone.

7.5 months later, she was finally ready to be taken home. About 9 miles away, check engine light came on. Absolutely gutted. Went straight back to dealership. 4 codes triggered.

This has been a horrific experience

2nd owner, 67k miles, purchased a couple months ago. Quietest and nicest car I've owned. I miss my 2018 Mustang GT Premium Convertible, but this car is much more cozy.

I’m pretty sure this is a 1962 convertible Cadillac. It’s absolutely amazing. Every time I drive by it just makes me smile.

I am very fortunate in my life where I am able to afford to operate a 2023 Escalade ESV Sport. I purchased it since I despise minivans. I have a 7 months old boy and one more coming! If the new model arrives in 2028, I want the air suspension to load/unload a car seater easier this time around… The reason why I didn’t get the Platinum trim were due to the rear entertainment screens and reliability issue with the air suspension…

It’s 57k miles was stolen in 2021 has brand new 416 motor confirmed by the shop and built manual transmission and clutch the whole drive line is basically new. It does have some missing tabs near the headlights causing a gap and few lil chips on the hood and curb rash. I offered him 33750 from 40000 and the car fax on the car is honestly rather ass but it has new engine and everything.

Can anyone give me accurate dimensions for an ATS trunk. Between the wheel wells and depth.
I’m a mobile massage therapist looking to see if I can fit a massage table in the trunk.

I took my car in to have the tires rotated and balanced at Discount Tire. Tech comes out and tells me one of the wheels (rims) is bent as he noticed it immediately, I had him put in on the rear of my 2013 XTS Platinum with only 83K miles. (Love or hate them, I've dealt with the same one for over 25 years, excellent service and support.)

Have any of you dealt with taking a bent polished aluminum wheel to a shop where (they claim) they can straighten and balance the rim? What was your success with the wheel remaining round and in balance? How did it look cosmetically after straightening? I'm in Dallas, TX for any recommendations.

Do y'all even off-road in your V? 😤 😅

It has a new spark plug with no oil inside. It has a new ignition coil. The fuel injector works (its ticking)

My brake went stiff and my car wasn’t stopping and I brought it to the mechanic I usually go to for repairs and they told me I had a bad vacuum pump and the price was money I don’t have right now. So I made the decision to get the car towed so I could just try to do it myself.

I followed some tutorials and took out my wipers, wiper motor, and the trim. I got two of the bolts off the vacuum pump but I really cannot reach the third one no matter what I try. I’ve been trying to figure out the tool that everyone is using to get to the final bolt but I can’t find quite the right thing…I feel so dumb.

I’m exhausted from working on this for like 4 days after work everyday and then being up till like 5-6am and getting like an hour and a half of sleep before heading to work again. I feel like I’m losing my sanity. Someone please help me find the tool 😭

I have a 2016 ATS and i just recently replaced the headlight bulb. Problem is that it won’t turn on even though i’ve checked the fuse and connections. The other one is working fine, but idk what could be the problem. My blinkers and other lights work it’s just the headlight bulb.