So I was still on X11 on my QEMU guest since using -usb -device usb-tablet as recommended by the Wiki caused the guest mouse to lag. Now that X11 was removed I had to switch.

Replacing the above command with -device virtio-tablet-pci fixed the issue for me. Hope someone else finds it useful.

Hey guys! I am the maintainer of xhidecursor, a minimal (fr) X11 utility that efficiently (nocap) hides the cursor on key presses and shows it again on mouse movement. Just wanted to announce that I’ve taken over and updated the AUR package, which had been orphaned and out of date for a while.

I wrote xhidecursor because xbanish (a popular alternative) couldn’t satisfy my OCD for minimalism. xhidecursor prioritizes a simple implementation and efficient event processing, ignoring redundant input events.

Let me know if there are any issues and if it runs as expected on your system. Thank you!

So I run KDE plasma and an RTX3080 (thought it was worth mentioning for diagnosing)

Normally wayland is too buggy for me, but had success running it for the last few weeks. Today I went to run my near-daily update of pacman. I happened to notice something about removing “plasma-x11” and replacing it with “plasma-sessions” (might not have been “plasma”, because I didn’t pay it much attention tbh).

After the update, it kicked me out to an unfamiliar login screen (lost some progress, it’s annoying that there was no warning). Logging back in worked, but my screen had an offset bug again (common for me in wayland).

So I went to reboot into x11, but I don’t have any boot options now, only “reboot into firmware interface” which is just UEFI. I haven’t backed up my 2 recent projects, and I super dooperly don’t want to have to start over again (one project is f-ing davinci resolve, so you can recover, you have to be properly logged in!!! God, why do I use davinci still?)

I had played on steam normally today, everything was working normally. Around 2 hours ago, i had to delete remake my global wine prefix to fix a corrupted file, after that, i tried to launch a game on steam, but none of my games were launching. I closed steam, and when i tried to open it again a pop up showed up saying:
"Error: Steam now requires user namespaces to be enabled.

This requirement is the same as for Flatpak, which has more detailed

information available:

https://github.com/flatpak/flatpak/wiki/User-namespace-requirement"
i went to the github page and set my bwrap to unprivileged but that still didnt fix the steam error.

when i tried to run the "steam --reset" command on the terminal, it said:
"steam.sh[185687]: Running Steam on arch rolling 64-bit

steam.sh[185687]: STEAM_RUNTIME is enabled automatically

setup.sh[185747]: Steam runtime environment up-to-date!

steam.sh[185687]: Log already open

steam-runtime-check-requirements[185801]: W: Child process exited with code 1: bwrap: execvp true: Permission denied"

i have looked and tried solutions for about an hour at this point and i have no idea what i could do. any help is appreciated!!

Trying to customize the editor and i want to get rid of the app icon on the left-superior corner. Is there a way?

User cofigs:

{
  // WORKBENCH / UI LAYOUT
  "workbench.commandPalette.showAskInChat": false,
  "workbench.activityBar.autoHide": true,
  "workbench.activityBar.compact": true,
  "workbench.sideBar.location": "right",
  "workbench.settings.showAISearchToggle": false,
  "workbench.editor.decorations.colors": false,
  "workbench.activityBar.location": "top", // Move the activity bar (Explorer, Git, etc.) to the top
  "window.commandCenter": false, // Disable the large command center search bar
  "workbench.iconTheme": "symbols", // Minimal icon pack
  "workbench.colorTheme": "Min Dark", // Color theme
  "workbench.statusBar.visible": false, // Hide the status bar for a cleaner UI
  "window.newWindowDimensions": "inherit", // New windows inherit the current window size
  "window.nativeFullScreen": true, // Use OS native fullscreen behavior
  "breadcrumbs.enabled": false, // Disable breadcrumbs navigation bar

  // FONTS & TYPOGRAPHY
  "editor.fontFamily": "Brass Mono, monospace", // Main editor font
  "editor.fontSize": 14, // Editor font size
  "editor.lineHeight": 1.6, // Improve readability of code spacing
  "editor.letterSpacing": 0.3, // Slight spacing between letters (optional aesthetic tweak)

  // TERMINAL APPEARANCE
  "terminal.integrated.fontFamily": "Brass Mono, monospace", // Terminal font
  "terminal.integrated.fontSize": 14, // Terminal font size
  "terminal.integrated.lineHeight": 1.6, // Extra spacing for terminal readability

  // FORMATTER / CODE STYLE
  "editor.defaultFormatter": "esbenp.prettier-vscode", // Use Prettier as the default formatter
  "prettier.tabWidth": 2, // Number of spaces per indentation level
  "prettier.useTabs": false, // Use spaces instead of tabs

  "editor.formatOnSave": false, // Format files automatically when saving
  "editor.insertSpaces": false, // Use spaces instead of tabs
  "editor.tabSize": 2, // Number of spaces per indentation level

  "files.trimTrailingWhitespace": true, // Remove trailing whitespace when saving
  "files.insertFinalNewline": true, // Ensure every file ends with a newline (POSIX standard)
  "files.trimFinalNewlines": true, // Remove multiple blank lines at end of file

  "css.lint.unknownAtRules": "ignore", // Ignore Tailwind warnings
  "scss.lint.unknownAtRules": "ignore", // Ignore Tailwind warnings
  "less.lint.unknownAtRules": "ignore", // Ignore Tailwind warnings

  // EDITOR BEHAVIOR
  "editor.detectIndentation": false, // Disable indentation auto-detection, Forces your manual indentation rules
  "editor.snippetSuggestions": "top", // Place snippets at top of autocomplete suggestions
  "editor.emptySelectionClipboard": true, // Copy line if nothing is selected
  "editor.copyWithSyntaxHighlighting": false, // Copy plain text instead of colored syntax

// MINIMALIST UI (REMOVE VISUAL NOISE)
  "editor.minimap.enabled": false, // Disable minimap on right side
  "editor.lineNumbers": "off", // Hide line numbers
  "editor.guides.indentation": false, // Remove vertical indentation guides
  //"editor.folding": false, // Optional: remove code folding controls

// DIFF / GIT COMPARISON
  "diffEditor.ignoreTrimWhitespace": false, // Show whitespace differences in git diffs
  "diffEditor.renderSideBySide": true, // Side-by-side diff view instead of inline

  // NAVIGATION BEHAVIOR
  "editor.gotoLocation.multipleReferences": "goto", // If multiple results exist, jump directly instead of showing picker
  "editor.gotoLocation.multipleDefinitions": "goto", // If multiple results exist, jump directly instead of showing picker
  "editor.gotoLocation.multipleDeclarations": "goto", // If multiple results exist, jump directly instead of showing picker
  "editor.gotoLocation.multipleImplementations": "goto", // If multiple results exist, jump directly instead of showing picker
  "editor.gotoLocation.multipleTypeDefinitions": "goto", // If multiple results exist, jump directly instead of showing picker

  "workbench.editor.enablePreviewFromQuickOpen": false, // Prevent preview tabs from Quick Open (Ctrl+P)

// AI / EXTENSIONS
  "chat.disableAIFeatures": true,
  "chat.agent.enabled": false,
  "chat.agentsControl.enabled": "hidden",

// FILE EXPLORER
"files.exclude": {
"**/.next": true,
"**/node_modules": true
},

// Editor
  "editor.accessibilitySupport": "off",
  "editor.matchBrackets": "never",
  "editor.wordWrap": "on",
  "editor.autoIndentOnPaste": true,
  "editor.smoothScrolling": true,
  "editor.wrapOnEscapedLineFeeds": true,
  "editor.experimental.asyncTokenization": false,
  "editor.cursorBlinking": "smooth",
  "editor.minimap.autohide": "mouseover",

  // Files
  "files.autoSave": "afterDelay",
  "files.autoSaveWhenNoErrors": true,

  "git.autofetch": true,
  "zenMode.showTabs": "single",
  "explorer.confirmDragAndDrop": false,
  "redhat.telemetry.enabled": true,
  "[jsonc]": {
    "editor.defaultFormatter": "esbenp.prettier-vscode",
  },
  "jdk.maven.userSettings": "",
}

I’m testing out a standard Arch setup for work (installed via Archinstall with its default Btrfs layout) after spending a long time on Fedora. The thing that caught my attention the most was trying to do a system rollback with Snapper. I gave it a few shots—even following AI guides—but just couldn't get it to work. So I turned to a method I had previously dismissed back on Fedora: Btrfs Assistant, a really simple and user-friendly GUI. And well, it worked on the very first try to roll back my root partition.

I really wanted to check my aur packages and see if theres something so I installed this: https://github.com/lenucksi/aur-malware-check

I'm not good in reading code, so if someone can help me and see if it's fine this would be great help, thanks! (and yes I get it "don't download random scripts from the internet, I know that but I'm just very, very stupid ok.)

apparently the stripe-cli in the AUR has been taken over by malware is this true?

Update: switched out to a different HDMI cable (48gbps certified) and it works.

Original post:

Hi, long time reader, first time "pls help me 🙏" post

Amd Rx 6900xt, Samsung q80t screen, hdmi2.1, Wayland, gnome

Been routinely checking in for years to see if the hdmi2.1 fiasco has resolved and was delighted to see that as of June, hdmi2.1 support has been merged into the kernel.

Enabled with setting dc feature mask to 0x400.

I enabled this last night and getting full 8 bit rgb at 4k at 120hz finally worked, however, every 30 seconds or so the screen goes black for about a second.

I spent last night troubleshooting; nothing I did helped the issue, and no relevant kernel or GPU logs pointed to the issue. (Also checked gnome and mutter logs). The issue occurs on plasma as well.

I see amd provided a patch for Linux 7.4 (December 2026), which I may pull their dev branch and just compile it as a stab in the dark to see if that happens to include the fix for wtv is happening.

Just wondering if anyone's experienced this, and if they figured out what was going on.

(The wiki was obv checked briefly last night and no mention of any of this)

What this script provides?

Different machine-id to /etc/machine-id so your machine-id never tracked.

Different dbus instance working in /home/$USER/$BROWSER-dbus Which provides mpris info about your music/video.

Different /home for sandbox.

Different /etc/passwd and /etc/groups so sandbox doesnt see your users and groups.

No root needed only bwrap.

Downloads go to the your /tmp/$USER/Downloads folder.

Minimal sys exposure.

Why?

Because I can.

About Script

(I made a copy paste mistake 6 hours ago while editingt duplicate lines. its fixed now.)

I tried to keep it minimal exposure at possible but you can give recommendations and I will fix it. Also I noticed I exposed /sys/devices/pci0000:00 as my gpu, You supposed to switch this with your cpu pci port number.

It is intended to use this with gentoo's simple sandbox https://wiki.gentoo.org/wiki/Simple_sandbox

Tested on arch, Right now I am using arch and writing from a browser that runs in this script. Hopefully its good enough for you.

#!/bin/sh
# wayland socket 
# --ro-bind "${XDG_RUNTIME_DIR}/${WAYLAND_DISPLAY}" "${XDG_RUNTIME_DIR}/${WAYLAND_DISPLAY}"\
set -u

USER="librewolf"
BROWSER="librewolf"
XDG_CACHE_HOME="/home/$USER/$BROWSER/.cache"
XDG_DATA_HOME="/home/$USER/$BROWSER/.local/share"

NEW_HOME='/home/restricted'
NEW_XDG_CACHE_HOME="/home/$USER/$BROWSER/.cache"
mkdir -p -m 755 "/home/$USER/$BROWSER/firefox/"
mkdir -p -m 755 "/home/$USER/$BROWSER/.local/share/firefox"
mkdir -p -m 755 "/home/$USER/$BROWSER/.cache/mozilla"
mkdir -p -m 755 "/home/$USER/$BROWSER/Downloads"
mkdir -p -m 755 "/home/$USER/$BROWSER/firefox"
mkdir -p -m 755 "/home/$USER/$BROWSER/.mozilla"
mkdir -p -m 755 "/home/$USER/$BROWSER/.firefox"
mkdir -p -m 755 "/home/$USER/$BROWSER/.$BROWSER"
mkdir -p -m 755 "/home/$USER/$BROWSER/.local/share/$BROWSER"
mkdir -p -m 755 "/home/$USER/$BROWSER/.cache/$BROWSER"
mkdir -p -m 755 "/home/$USER/$BROWSER/.config/pulse"
mkdir -p -m 755 "/tmp/$USER/Downloads"
mkdir -p -m 755 "/home/$USER/$BROWSER-dbus"
echo -e "default-server = unix:/tmp/pulse-sock" > /home/$USER/$BROWSER/.config/pulse/client.conf
[ -f $BROWSER-machine-id ] && echo "" || dbus-uuidgen >> $BROWSER-machine-id
[ -f passwd ] && echo "" || echo "$USER:x:$UID:$UID:Sandbox User:/home/$USER:/bin/bash" >> passwd
[ -f group ] && echo "" || echo "$USER:x:$UID:" >> group


/usr/bin/bwrap \
--unshare-all \
--share-net \
--new-session \
--die-with-parent \
--clearenv \
--setenv HOME "$NEW_HOME" \
--setenv PATH "$PATH" \
--hostname localhost \
--symlink usr/lib /lib \
--symlink usr/lib64 /lib64 \
--symlink usr/bin /bin \
--symlink usr/bin /sbin \
--ro-bind /home/$USER/passwd /etc/passwd \
--ro-bind /home/$USER/group /etc/group \
--ro-bind /usr/lib /usr/lib \
--ro-bind /usr/lib64 /usr/lib64 \
--ro-bind /usr/bin /usr/bin \
--ro-bind /usr/lib/$BROWSER /usr/lib/$BROWSER \
--tmpfs /tmp \
--dev /dev/ \
--dev-bind /dev/dri /dev/dri \
--ro-bind /sys/dev/char /sys/dev/char \
--ro-bind /sys/devices/pci0000:00 /sys/devices/pci0000:00 \
--ro-bind /sys/bus/pci /sys/bus/pci \
--ro-bind /usr/share/drirc.d /usr/share/drirc.d \
--ro-bind-try /etc/firefox/policies/policies.json /etc/firefox/policies/policies.json \
--ro-bind /etc/fonts/ /etc/fonts/ \
--ro-bind /etc/resolv.conf /etc/resolv.conf \
--bind /home/$USER/$BROWSER /home/restricted \
--bind /tmp/$USER/Downloads /home/restricted/Downloads \
--proc /proc/ \
--ro-bind /home/$USER/$BROWSER-machine-id /etc/machine-id \
--ro-bind /usr/share/gtk-3.0 /usr/share/gtk-3.0 \
--ro-bind /usr/share/fontconfig /usr/share/fontconfig \
--ro-bind /usr/share/icu /usr/share/icu \
--ro-bind /usr/share/drirc.d /usr/share/drirc.d \
--ro-bind /usr/share/fonts /usr/share/fonts \
--ro-bind /usr/share/glib-2.0 /usr/share/glib-2.0 \
--ro-bind /usr/share/glvnd /usr/share/glvnd \
--ro-bind /usr/share/icons /usr/share/icons \
--ro-bind /usr/share/libdrm /usr/share/libdrm \
--ro-bind /usr/share/mime /usr/share/mime \
--ro-bind /usr/share/X11/xkb /usr/share/X11/xkb \
--ro-bind /usr/share/icons /usr/share/icons \
--ro-bind /usr/share/gtk-4.0 /usr/share/gtk-4.0 \
--ro-bind-try /usr/share/gtk-5.0 /usr/share/gtk-5.0 \
--ro-bind /usr/share/glib-2.0 /usr/share/glib-2.0 \
--ro-bind /usr/share/dbus-1 /usr/share/dbus-1 \
--ro-bind /usr/share/X11 /usr/share/X11 \
--ro-bind /usr/share/gtksourceview-4 /usr/share/gtksourceview-4 \
--ro-bind /usr/share/glycin-loaders /usr/share/glycin-loaders \
--ro-bind /usr/share/pixmaps /usr/share/pixmaps \
--ro-bind /etc/fonts /etc/fonts \
--ro-bind /etc/resolv.conf /etc/resolv.conf \
--ro-bind /usr/share/ca-certificates /usr/share/ca-certificates \
--ro-bind /etc/ssl /etc/ssl \
--ro-bind /etc/ca-certificates /etc/ca-certificates \
--bind /tmp/.X${DISPLAY#:}-lock /tmp/.X${DISPLAY#:}-lock \
--bind /tmp/pulse-sock /tmp/pulse-sock \
--bind /home/$USER/$BROWSER-dbus /run/$BROWSER-dbus \
--setenv XDG_RUNTIME_DIR /run/$BROWSER-dbus \
--setenv DISPLAY $DISPLAY \
--setenv MOZ_ENABLE_WAYLAND 0 \
sh -c '
dbus-daemon \
--session \
--nofork \
--address=unix:path=/run/$1-dbus/bus &
buspid=$!

export DBUS_SESSION_BUS_ADDRESS=unix:path=/run/$1-dbus/bus
/usr/lib/$1/$1
status=$?

kill $buspid 2>/dev/null
wait $buspid 2>/dev/null
exit $status
' sh $BROWSER#!/bin/sh

I want to add It runs on seperate xwayland session using cage So my real wayland socket or xwayland never exposed. I run it like this cage bash -- /home/myuser/sway/scripts/runlibrewolf.sh and runlibrewolf.sh contains this

#!/bin/bash
set -e
USER=librewolf
PROGRAM=$USER

/usr/bin/xhost si:localuser:$USER && sudo -i -u librewolf ~librewolf/librewolf.sh 

Edit: Also checking playerctl info like this sudo -i -u $USER DBUS_SESSION_BUS_ADDRESS=unix:path=./librewolf-dbus/bus playerctl play-pause

I need help installing proton to play minecraft dungeons 1 on arch linux. I have a liscence for the microsoft store, but every proton tutorial ive found online has failed at some stage, because what it say would be there just wasnt. Do any of you know any good and working tutorials?

What the title says. I was just thinking about the similarities between the Chaotic AUR and the nixpkgs Nix repository, and they are much more similar than people realize. Both are pretty open to contributions by pretty much anyone without an entry barrier, but they require verification by a trusted user to be accepted. Most of the praise people give nixpkgs due to its large ecosystem size can also be attributed to chaotic-aur, although it's not as big as nixpkgs, it's still quite big.

So yeah, that's pretty much it, just a random thought that chaotic-aur is really under appreciated, and I think more people should check them out, especially those worried by the "AUR scares" and that think there's no real Arch alternative to it besides accepting the risks yourself.

Thank you, chaotic-aur maintainers!

Do people dual boot Arch and Windows? Especially with me, I have a NVIDIA card, so I can't really afford to jump straight to Linux. I thought about grabbing an AMD card since I'm told they handle VRAM overfill into system RAM quite well

hello! ive used windows my entire life, tried windows11 and it was trash so i switched back to windows 10, it was like less trash but still trash, and bassicly just advertising software, so i modified it using a handful of different softwares, even intentinally bricked a couple system files by hand, but it still wasnt enough, so i said screw it im going linux,

i tried cachyos first, used it for one entire day, and decided "hell, why not go arch, theres plenty of informationt online for me to learn about it" and ive now used arch for two days and i fricken LOVE it, im using kde de

(ive already broke my lockscreen but fixed it somehow)

(and fixed like 10 other problems)

(and i have like 30 different external softwares installed)

(i have absolutly no idea what im doing)\

HELLO ARCH

Personally, I am not a fan of epic or multiplayer games, and will probably never play on such a spyware, but we have a good thing going on with arch and its derivatives emerging as excellent choices for gaming. However, epic may throw in a wrench, with the requirement of signed kernels and secure boot for easy anti-cheat, and derail the good thing going on.

So do you think arch will ever provide signed kernels or secure boot? What limitations, besides ideological ones, are there?

Today my sudo pacman -Syu was met with the error "plasma-workspace-6.8.0-1 and plasma-x11-session-6.7.5-3 are in conflict. Remove plasma-x11-session? [y/N]". It looks like Plasma stopped supporting X11 for some reason? Is this it, am I forced to switch? I really don't want to, Wayland is still underbaked in many ways (session restore, graphic tablet configuration, screen sharing), and so I'm still using X11. I don't want to enter into a partial update state by blocking plasma updates. Is there any solution to this?

The normal laptop are looking bad for price getting a good deal on IdeaPad slim 3 15 , 16 , 512 it's looking much much better than normal options for same price,

Idk about the current linux on arm situation

I switched from Windows to mint maybe 3 weeks ago, butstill thought it was sort of bloated for me (never use "App store"-type programs for example). Switched to Arch yesterday (im still dualbooting rn to migrate my data but otherwise yes).

now i can officially say "i use arch btw" :D

Occasionally I need to copy big files to relatively slow USB sticks.

(Usually ISO images to my pendrive with Ventoy to install an OS somewhere or run a rescue mission. BTW if you are still using stuff like Rufus or dd for that purpose, check out Ventoy, it's awesome)

And for a long time, a pet peeve of mine was that the big file was copied "instantly", but then unmounting that pendrive took forever with no progress bar. I'd much rather have a real progress bar that shows how fast the stick actually writes.

After some research, I learned that Linux happily lets gigabytes of dirty data pile up in RAM before it starts throttling the program doing the writing. So the file manager thinks the copy is done when really it’s just sitting in memory, and unmount has to flush all of it. So I made a udev rule that sets a 16 MB limit on dirty cache for USB disks:

# /etc/udev/rules.d/90-usb-dirty-limit.rules
ACTION=="add", SUBSYSTEM=="block", ENV{DEVTYPE}=="disk", ENV{ID_BUS}=="usb", RUN+="/bin/sh -c 'echo 1 > /sys/class/bdi/%M:%m/strict_limit; echo 16777216 > /sys/class/bdi/%M:%m/max_bytes'"

16 MB of dirty cache should be plenty for most pendrives (and it's the limit of data the OS will "pretend" to have instantly copied). If you regularly use a fast USB SSD you might want a bigger number there like 128 MB, since a tiny buffer can cost some throughput on really fast drives.

I have ultra core 7 255H

32GB LPDDR5X ram

My booting times are 5 mins on average

Keeps freezing

Apps struggle to run

First time linux user here

Using grub for windows 11 and ArchLinux dualbooting