I configured the system so that the projectors turn on only when damage is inflicted upon the objects connected to them. However, there is a problem: to turn more than 10 projectors on or off, they have to be added manually. This is the first time I’m trying to do something proper in a processor, so I don’t know how to resolve this

set p 0

getlink wall p

sensor h wall @health

sensor mh wall @maxHealth

op lessThan on h mh

control enabled projector1 on 0 0 0

control enabled projector2 on 0 0 0

control enabled projector3 on 0 0 0

control enabled projector4 on 0 0 0

control enabled projector5 on 0 0 0

control enabled projector6 on 0 0 0

control enabled projector7 on 0 0 0

control enabled projector8 on 0 0 0

control enabled projector9 on 0 0 0

control enabled projector10 on 0 0 0

jump 17 equal on false

jump 2 notEqual on false

op add p p 1

jump 1 lessThan p @links

I've removed the phase conveyor from the design, made it smaller by 11 blocks and a little less messy. Similar to the first version, needs about 10 scrap per sec, gives 7.5k energy, zero clogging and no logic requirement.

Scheme code in the comments:

Nesesito ayuda con este sector lo en intentado y me resulta super difícil aguantar nesesito ayuda como capturo este sector soy jugador en teléfono

I personally think 247 is more difficult considering the near endless barage of omnidirectional attacks from air naval and ground. the water also limits my defenses against attacks.

242 is pretty smooth sailing after 4,5 tries and getting the three cores on my side

Thought they broke through at first, decided to redesign the entire frontline and make more surge export, but after closer look... reactors clogged with something and turned off, ending the 4 hour long run that had around 2 hours of preparation

No, I didn't run out of power, I had around 200k remaining at highest and 100-120k at lowest

Yes, I saw the clogg few times, but it turned off just 4 out of 20 reactors

Yes, I cleared the clogg and ignored it, didn't search for why it happened

I guess I'm stupid

For some reason when i do this command. It just adds random floor freckles that is not vents. How do i add vents?

Llevo rato buscando el nombre del mod, pero nada.