**In game**

Designation: MON-66

25T Light IS BattleMech

8/12/0 Hex

10 HS

1 ML RA

1 ML LA

1 ML CT

1 SL H

Beagle Active Probe LT

Endo-Steel

Ferro-Fibrous

**LEGO**

24 Pieces:

- 6x 61252 Plate, Modified 1 x 1 with Open O Clip Thick (Horizontal Grip)

- 4x 26047 Plate, Round 1 x 1 with Bar Handle (on the side)

- 3x 3070 Tile 1 x 1

- 3x 85861 Plate, Round 1 x 1 with Open Stud

- 2x 3024 Plate 1 x 1

- 2x 65578 Bar 1L with Angled Hollow Stud

- 2x 20482 Tile, Round 1 x 1 with Bar and Small Pin Hole

- 1x 4733 Brick, Modified 1 x 1 with Studs on 4 Sides

- 1x 4697b Pneumatic T Piece Second Version (T Bar with Ball in Center)

Total estimated cost (*new*): 1.69 USD

I'm putting the Mongoose-66 here, in the 3050 series, as it is the standard variant. The retro-fitted 67 model (getting rid of the Probe, advanced armour and chasis) could very well be part of the 3025 series, though.

Parts list is the same for both colours. Estimated cost is valid for the green version.

The prototype has undergone some changes trying to better represent the shape of the upper torso.

It's not the most accurate of the models, but I couldn't refrain from using the "Among Us" piece right in the chest.

Standard feet and basic articulation. Regular size, adequate for gameplay.

Comments, feedback and requests welcome.

NB: I just realised I shot no top view for this one. Sorry.

My blog post for Friday, October 16, 2026.

Feel free to comment or ask questions.

One Page Rules compatible

My blog post for Wednesday, October 14, 2026.

Feel free to comment or ask questions.

I suppose it's a good time to mention that Star Craft the miniatures game has free rules and is NOT a WYSIWYG game:)

My blog post for Tuesday, October 13, 2026.

Feel free to comment or ask questions.

**In game**  

Designation: FFL-4B  

30T Light IS BattleMech  

5/8/4 Hex  

10 HS  

1 ML RA  

1 ML LA  

1 ML CT  

1 LRM5 RT  

1 AMS LA  

1T (24 salvo) LRM5 LT  

1T (12 salvo) AMS Ammo LT  

CASE LT

**LEGO**  

23 Pieces:

- 4x 54200 Slope 30 1 x 1 x 2/3

- 2x 86996 Brick, Modified 1 x 1 x 2/3 with Open Stud

- 2x 3386 Brick, Round 1 x 1 x 2/3 Half Circle Extended with Stud on Side

- 2x 85861 Plate, Round 1 x 1 with Open Stud

- 2x 15070 Plate, Modified 1 x 1 with Tooth Vertical

- 2x 4599 Tap 1 x 1 (Undetermined Type)

- 2x 65578 Bar 1L with Angled Hollow Stud

- 2x 78258 Bar 2L with Stop Ring

- 1x 36841 Bracket 1 x 1 - 1 x 1

- 1x 36840 Bracket 1 x 1 - 1 x 1 Inverted

- 1x 4081b Plate, Modified 1 x 1 with Light Attachment - Thick Ring

- 1x 77850 Plate, Round 1 x 3 with Open Studs

- 1x 32828 Bar 1L with 1 x 1 Round Plate with Hollow Stud

Total estimated cost (*new*): 2.20 USD

A standard technology level Light from TRO3050. Nothing really fancy here.

I sacrificed the representation of the Anti-Missile System in favour of the slanted side torsos. My prototype had brackets facing to the sides instead of the tooth pieces. I don't want to increase the volume of the model by including both. Other solutions involved removing the laser barrels. There's simply not enough room for everything. Not that I could find, I mean.

I want to try the new 1-stud-wide wing support piece, but since I don't have any, the cheese slopes will do for now.

No arms and no torso turning this time. All the weight of a dynamic display rests on the legs and how you pose them. Lucky it's looking fast and jumpy.

The size is perfect for gameplay. A specialized base is needed to attach the foot.

Comments, feedback and requests welcome.

My blog post for Friday, October 9, 2026.

Feel free to comment or ask questions.

Presenting the third and final upgrade i can possibly do to my minifigure power armor suits. combined with the 40mm stand (offered seperatly) you can use these for your FALLOUT The Roleplaying Game miniatures. designed for articulation and accuracy the suits are 1.5 minifigure scale or 2.1 inches and puts other models to shame with how flexible it can be. download yours and your stands instructions for FREE on Rebrickable. Brought to you by but not sponsored by "Bethesda Softworks".

This could work for Brassbound 1919; toss aside the setting and just use the rules!

My blog post for Monday, October 5, 2026.

Feel free to comment or ask questions.

**In game**

Designation: Stone Rhino [Behemoth]

100T Assault Clan BattleMech

3/5/3 Hex

10 DHS

1 LPL RA

1 LPL LA

1 Gauss Rifle RT

2T (16 rounds) Gauss Rifle Ammo RT

1 Gauss Rifle LT

2T (16 rounds) Gauss Rifle Ammo LT

1 SPL H

**LEGO**

65 Pieces:

- 8x 36840 Bracket 1 x 1 - 1 x 1 Inverted

- 6x 85861 Plate, Round 1 x 1 with Open Stud

- 4x 78258 Bar 2L with Stop Ring

- 4x 54200 Slope 30 1 x 1 x 2/3

- 3x 36841 Bracket 1 x 1 - 1 x 1

- 3x 3024 Plate 1 x 1

- 3x 99563 Minifigure, Utensil Ingot 1 x 2

- 4x 49307 Slope, Curved 1 x 1 x 2/3 Double

- 2x 3062 Brick, Round 1 x 1

- 2x 4740 Dish 2 x 2 Inverted (Radar)

- 2x 35464 Slope 45 1 x 1 x 2/3 Double

- 2x 99780 Bracket 1 x 2 - 1 x 2 Inverted

- 2x 3386 Brick, Round 1 x 1 x 2/3 Half Circle Extended with Stud on Side

- 2x 65578 Bar 1L with Angled Hollow Stud

- 2x 4274 Technic, Pin 1/2 without Friction Ridges

- 2x 23443 Bar Holder with Handle

- 2x 26047 Plate, Round 1 x 1 with Bar Handle (on the side)

- 2x 15712 Tile, Modified 1 x 1 with Open O Clip

- 2x 15573 Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

- 1x 4595 Brick, Modified 1 x 2 x 2/3 with Studs on Sides and Extended Stud Receptacle

- 1x 29119 Wedge 2 x 1 x 2/3 Right

- 1x 29120 Wedge 2 x 1 x 2/3 Left

- 1x 4697b Pneumatic T Piece Second Version (T Bar with Ball in Center)

- 1x 60470b Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

- 1x 3070 Tile 1 x 1

- 1x 24246 Tile, Round 1 x 1 Half Circle Extended

- 1x 86996 Brick, Modified 1 x 1 x 2/3 with Open Stud

Total estimated cost (*new*): 6.07 USD

A well rounded non-Omni Clan BattleMech. Not much going on, aside from Clan weaponry.

The parts count is below my 75 threshold for Assaults, but I don't think it needs more detail.

The half pin can be the one with friction, it does not affect the design.

The jumper plates must not have a peg underneath (should be the newer version) since they are centered on top of a solid stud.

It's a complex build, with lots of intertwined pieces to get the shape of the torso.

I couldn't find a better way to represent the small laser, so I left the slot from the bracket as a suggestion of it. If you want something more readable as a gun, remove the slope and put a hollow stud or an inkwell piece in the front.

The shielding jackets in the arms can't slide, but I tried to give the illusion of them being able to.

Large barrel arms have minimal pose-ability. Legs can walk. Torso and turret turn. Relatively easy to clip to a game base.

Small sized compared to other Assaults of mine, but I prefer this scale for gameplay. Despite that, this patty-shaped moster covers a great deal of the hexmap. It's a 100T at the end of the day.

Comments, feedback and requests welcome.

My blog post for Friday, October 2, 2026.

Feel free to comment or ask questions.

It's time to build the game...and then play the game...that all of us enjoy. Connect Four! Read more about it and vote for it on LEGO Ideas here: https://ideas.lego.com/product-ideas/20d20737-e39d-4638-812c-f14d699f3ca1 After 8 days of being live on the site, it's already received 800 votes! Let's keep it going.

My blog post for Wednesday, September 30, 2026.

Feel free to comment or ask questions.

My blog post for Monday, September 28, 2026.

Feel free to comment or ask questions.