I mean completely disassemble the whole gun, clean the parts, lubricate and then reassemble. I regularly field strip and clean all my replicas but some of them I've had for a while without actually taking them completely apart and cleaning all the internal mechanisms. Some I've never done it. I was wondering what do you guys do?

Finally got my hands on the gunday ramjet but my first impressions on it werent too good…

I got the aluminum version as my slide is also aluminum and did not expect it to be heavy like the steel version but it is just way too light (the comp + barrel combined is noticably lighter than the stock barrel on its own), I almost thought there wasnt anything in the box when I took delivery of it.

The outer diameter of the barrel itself is also slightly smaller than that of the stock which causes the comp and barrel to wobble more than I’d like it to..

It looks amazing on the gun but I wish they used more material on it to increase the weight and tighter tolerances on the barrel to reduce wobble as the stock GHK has great tolerances relative to GBB pistols..

Does anyone else have the same issues or know any fix?

This is my first VT, a Colt Model 723 that i believe is an early production model. It comes with A2 upper & a pencil barrel. The trigger pull on this thing is ridiculously satisfying

Got too used to those fancy fire selectors, that have place for using shooting hand index finder to switch shootings modes. While VFC does offer one, prices withing EU are quite high for a simple piece of bend steel. So can real AK fire selectors fit?

My bolt came loose with a screw, but I don't see it holding anything. Has anyone had a similar problem?
If so, what is the correct screw to replace it with?

Has anyone received their Toxicant SOLGW MK1 yet? I’ve seen a few people already posting theirs, so I’m curious about the current delivery status in different countries.

I reserved mine at the end of August, and they estimated delivery sometime between October and November. However, there haven’t been any further updates yet.
If you’ve ordered one, please share:

● Your country
● Where you ordered it from
● When you placed your order
● Whether it has shipped or arrived
● Whether your version came with the TAAS trigger system or the standard trigger unit
Just trying to get a clearer picture of the worldwide rollout.

Thanks!

Hello all, back to bug everyone again with another stupid question. What is this spring? And is it seated incorrectly? I feel like at some point something happened and now it’s in the way of the magwell when I put a magazine in. It still functions, and I can get the mag in, but I feel like something isn’t quite right. Should I bend it back into position or will that do more damage? Thank you all in advance.

I have a very old G&P GBBR that doesn't like to shoot. Basically you can get one shot then it dumps all the gas. I've tried different mags and HPA but nothing seems to work and from what I can there's nothing obviously wrong. I'd love to get this thing back up and running so if you have any advice please let me know

My brand new ghk aug is not working correctly. Tre mag can’t push up the bbs, it will shot 4-5 bbs then they don’t come up. How can I fix this? Thank you

Just purchased a Noveske N4 from Evike, hasn't arrived yet but I was planning on running .28g bb's on it, I purchased a 3 pack of green gas from Amazon and didn't realize the PSI rating on it, it's 199 PSI. Most of the videos I've seen on GBBR's i see people using cans with a 130-150 PSI rating, is 199 too high?

Is the piston’s slight wobble and the fact that it twists a problem? Or is this normal? I heard it can break overtime due to recoil if not tighten properly as it happened to Jaeger precision.

Also no idea how to tighten it as i need a very long allen key.

Thanks

Just bought a VFC MP5k Early Gen 2 was wondering what are some of the common issues with them. I know about the gas router being eaten at point already but what else?

Also was looking at the Bow master VFC Mp5 NPAS Kit is it any worth? Or should I just get a NPAS of guillotine.

Hi guys,

Are you able to tell from the video if my ak has already a built in npas? This is my first gbbr and i am still learning how everything works. I don’t think there is one inside but maybe i am wrong so if anyone can please confirm or correct me i would appreciate it.

Thanks

Mine is kinda mushy. It clicks when I switch it between firing modes but I'm used to premium real AR-15 switches. Will the airsoft one accept a real selector switch?

Been playing with ChatGPT again, this time it's my VFC XM177E2, changed out the background from my carpet to the one in the picture, I recently bought a genuine Vietnam era 20rnd mag and some deactivated 5.56mm and added them "jungle mag" style, just for when it's hanging on the wall. I hope you like it.

Some photos of part of my collection, specifically my WE-Techs. Absolute blasts and I beat the sh*t out of them and they still work (except the L85, as per usual)

First photo, top to bottom, right to left

EMG x KAC M2 PDW Compact Gen 3 in CQB setup
WE-Tech M4A1 Gen 2 in 2010s USAF SecFor setup
WE-Tech AKS-74U Gen 2 in forest setup
WE-Tech L85A2 Gen 2 no setup

Hi everyone, I have a VFC P226. I've had many issues with it. First it was the trigger spring that snapped, at the same time I had a mag placement issue where i had to push the mag up in order for it to fire.

Recently it decided to stop altogether, didn't fire when mag pushed up. then all of a sudden it worked after trying to show a friend a week later but then rapid fired dumping gas after about 3-4 shots. I replaced the hammer assembly and nozzle and it seemed to work nicely. However I've come back home today and now it's doing exactly the same thing, fires 1-4 shots and then dumps gas. This happens with all 5 mags I have, all mags have rarely been used so I can't see the mags having an issue.

Also just to add I have to either pull the trigger twice to fire or push on the de-cocker lever to set the hammer to fire.

If anyone has any ideas or suggestions would be greatly appreciated

Giving this WE M4 a new breath of life with these PMAG Gen 3 Shells

Not exactly MRGG-A but close enough. and yes, it’s real vfc.

Again, brand fanatics, before you start trolling, I do own VFCs, GHKs, Maruis, NorthEast, KWAs, Marushin, and Tanakas, so please go somehwere else.

Cuz Winter is coming!