Hi everyone,
I work in automotive software and want to build a solid understanding of Image Signal Processing (ISP) for ADAS cameras. I’m new to ISP, and I find vendor documentation difficult to follow without understanding the basics first.
I’m looking for a structured learning path covering:
Camera fundamentals: How image sensors work, RAW images, Bayer patterns, exposure, gain, and noise.
ISP pipeline: Demosaicing, white balance, noise reduction, color correction, HDR, and tone mapping.
ISP tuning: How to evaluate image quality and understand the trade-offs between different settings.
ADAS applications: How ISP settings affect object detection and perception, especially in low light or high-contrast scenes.
Which courses, books, YouTube playlists, or practical tutorials would you recommend? Free and paid options are both welcome. Hands-on exercises using RAW images, Python, or OpenCV would be especially helpful.
If you work in automotive imaging, where would you start, and in what order would you learn these topics? Please share links or resource names.
Thanks!

Hi everyone,
I work in automotive software and want to build a solid understanding of Image Signal Processing (ISP) for ADAS cameras. I’m new to ISP, and I find vendor documentation difficult to follow without understanding the basics first.
I’m looking for a structured learning path covering:
Camera fundamentals: How image sensors work, RAW images, Bayer patterns, exposure, gain, and noise.
ISP pipeline: Demosaicing, white balance, noise reduction, color correction, HDR, and tone mapping.
ISP tuning: How to evaluate image quality and understand the trade-offs between different settings.
ADAS applications: How ISP settings affect object detection and perception, especially in low light or high-contrast scenes.
Which courses, books, YouTube playlists, or practical tutorials would you recommend? Free and paid options are both welcome. Hands-on exercises using RAW images, Python, or OpenCV would be especially helpful.
If you work in automotive imaging, where would you start, and in what order would you learn these topics? Please share links or resource names.
Thanks!

I have a nexys A7 fpga but I don’t know what hobby project I should aim for

What better to generate fractals then with fixed point math on a fpga! Depth is limited, as well as resolution and color. This design can explore the Mandelbrot fractal at 640x480, which is not very majestic. Limited largely by the embedded memory the explorer uses.

So I added cool modes: once you navigate to a interesting area, you can flip the high res switch and It spends some time rendering a full image on my 1280 x 1024 monitor. This detail is impressive, but the fractal needs life. By shifting the colors post render in various patterns, the fractal burns to life, creating vivid imagery.

The design can also save 4k screenshots to the sd card. hd render and screenshots use the sdram instead of the embedded memory of the engines. However, even the 4k screenshots cannot capture the vividness of watching the colors shift through the fractal structure in person.

This is pretty much maxed out on the Cyclone V I had. Probably isn't the easiest to port, unless the target device is similar or more powerful. But anything is possible.

https://github.com/phase0noise/FractalGen

I applied for the role in the title and IBM sent a 10-20 minute interview link for assessment. They did not mention how technical it can be or on what topics. What should I expect?

I am a senior in ECE looking for full time in FPGA engineering, ASICS design, digital design, and general electrical engineering roles. I understand that the job market has been bad, but I have had little to no success with recruiting. I have had referrals, spoken to recruiters through platforms like Linkedin, cold applied to over 300+ places (and am still applying), etc. I have heard back from 3 companies total, out of which I was rejected after the recruiter call for 2 of them and after my first technical round for the other company. I just want feedback on my resume, advice on recruitment, and anything else that could be helpful. Thank you so much!

Back in 2022/2023 I was particularly interested in open source ISA for FPGA soft core processors so I started working on my own called OASIS. Its an open source ISA that I designed to be a lot easier to work with than RISC-V. Not that RISC-V is bad by any mean, it wasn’t nearly as straightforward as I hoped it would be to implement one. And I know, implementing a custom ISA isn’t exactly the easy route to understanding soft cores and processors at all. lol…

Anyway, I put it down in 2023 because I got bored and was doing other hardware things and work was pretty busy. I picked it back up this year to get it formalized documentation and implementation wise. I did use Codex to help fix some of my blatant RTL mistakes in my implementation core that I call DungV. that name is a bit of a joke for me because I wasn’t sure what I was doing 😅

Anyway, here’s the high level details on DungV with is running on my own RPGA Feather.

* 16b architecture with 32b wide instructions

* ALU that does a fair number of operations except for multiplication and division.

* Memory Mapped IO and peripheral instructions.

* 4 classes of instructions (reserved, ALU, register, memory)

* full intermediate support since the instructions are sufficiently wide.

* assembler and basic GCC14 compiler and ABI definitions.

Let me know what you think!

Anyway, here is the repo hosted on GitHub: https://github.com/skerr92/DungV

They make relatively inexpensive FPGAs, but I find their IDE/EDA confusing to use.

I wonder if anyone uses them a lot and has found it to be a good brand.

We're based in San Francisco and looking to rent AMD Alveo V80 cards. Does anyone know of rental providers or have cards they'd be willing to rent out?

Would appreciate any leads or contacts. Thanks!

Hello everyone,

Currently, I am pursuing my studies in Electronics and Communication Engineering and I am in my 7th semester. I am trying to improve my profile for internships and entry-level positions in the semiconductor industry.

I would like an honest critique of my resume, especially from people working in chip design, verification or other hardware roles.

My main interest are RTL design, digital VLSI, ASIC front-end design, design verification and digital hardware based on FPGA.

I’d love feedback on these questions in particular:

1. Does my resume demonstrate enough technical depth for an internship or entry-level role, or do my projects look too academic?
2. Which sections of my resume would cause you to toss it out immediately?
3. What projects or skills should I work on to be a better candidate?
4. Where should I look for small semiconductor startups or early-stage chip design companies that are offering internships or entry-level positions?
5. Are there any specific platforms, company directories, startup communities or job boards to follow for RTL, ASIC, FPGA and digital design verification roles?

Seeking internships or appropriate full-time opportunities. I'm especially interested in working at smaller companies where I can get hands-on design and verification experience.

Be honest, even if the feedback is brutal. I’d rather know my weaknesses now than continue applying with a noncompetitive resume.

Thanks!

any clue on this, when i flash the r5 using remote proc the r5 core shows to the xsdb as :

debug logic reset

if not flashing from remoteproc, i can stop and have access at the r5 but the problem is that i cannot flash it bcs tcm banks are powered off ( i am using linux on the a53)

• I am attaching also the picture

I have commonly using Digilent's Arty A7-35T. But I cannot execute code on board. Everytime when i press auto connect or find device on Vivado, my pc crashes Instantly with page fault in nonpage area and kernel security check failure error messages. I've been used Zedboard but my pc never crashed down

October 21, 2026 at 2pm ET (NYC time)

REGISTER: https://bltinc.com/xilinx-training/blt-webinar-series/debugging-embedded-applications-using-vitis-ide-system-debugger/

Can't attend live? Register to get the recording!

BLT, an AMD Platinum Embedded Design Services Partner and Authorized Training Provider, presents this webinar.

When embedded applications misbehave, engineers need clear visibility into execution flow, stack usage, and memory behavior to find the root cause quickly. This webinar shows how to use the AMD Vitis Unified IDE system debugger to step through code, set breakpoints, and monitor or modify variables and memory in real time. Using a recursive Towers of Hanoi example, we will explore the call stack and execution control techniques that help diagnose hard-to-find bugs, validate algorithms, and reduce time spent chasing elusive software issues. This webinar includes a live demo and Q&A.

I've made it to the technical interview for HFT Hardware Engineer Intern role and was wondering if anyone has any advice on what to prepare for?

Also, if anyone who's been through a similar AC would be willing to do a mock interview with me, I'd really appreciate it. Thanks!

renulev/sap-1: Malvino's SAP-1 implemented in Verilog

I used Icarus verilog for this project. GTKWave output looks clean.
I also used Makefile for automation.

I've been looking for internships for a while, mostly all of them require that you either study in or have the citizenship of the country in which the opportunity exists (mostly in US, Canada, and EU).

What can I do as a foreign student who wants to get a chance in such a field, especially that neither my uni or country overall offers a lot of opportunities for us?

I have the OA for the NVIDIA hardware internship at my college on October 22; can someone suggest the types of technical and aptitude questions asked, and as a BTech fresher, what kind of projects are sufficient?

Without any context, if my interview went like an 8 on 10, what chances do i have to move forward for a position (intern)

The position is in hardware background so less saturated then swe ig

I have been working with FPGAs for just about 10 years now. And I just realized that I have never done a CDC FIFO. Well... Maybe back in uni as some paper exercise.

It's such a weird gap too. Since it's like the first answer anyone gives whenever you want to transfer a lot of data across clock domains. But I just haven't needed a hardware FIFO for that yet.

So I spent the afternoon implementing one from scratch and shoving every edge case I could think of at it. Just as a learning exercise.

Have you found any weird gaps in your own knowledge?

I'm a third-year EEE student at UCL and I'm struggling to get past the initial application stage for FPGA internships. I rarely seem to receive online assessments and keep getting rejected after submitting my applications.

I'm particularly interested in FPGA engineering roles at trading firms, but I'm not sure whether the issue is my CV, lack of relevant experience, or something else.

For anyone who's been through this process, especially EEE students or people applying for FPGA/HFT internships, what helped you get more OAs? Is there anything specific recruiters look for at the CV screening stage?

Any advice would be really appreciated!

Hii guys,

I'm currently a student studying computer engineering and I was looking around for careers I could do with my degree.

I found out abt FPGA's later on and I really want to get into it.

The issue is that the engineering department in my school just started (I'm in the first set ever) so there's basically zero hardware-anything at all. I feel like it's so bad cause they've not even bothered to try to teach us any code in the last 3 years at this school.

Regardless I took it upon myself to learn something that will help me even a little when I finish from here and go do my masters, so I started with embedded and got an Arduino kit to start trying to learn with AI. I'm probably still very far off cause learning with AI isn't exactly ideal especially if it's a free version.

Joining this community has really opened my eyes to see how much farther the gap is and it feels like I'm in a hole trying to crawl out just to get to the base line

Any thoughts and advice would be very helpful

Thank you very much 🙏🏾🙏🏾

Hi everyone!

If anyone have appeared for the IMC Trading written test, could you please share the questions you remember? I’d be really grateful!

Also, if you cleared the test, could you share what to expect in the interview round and what topics I should focus on preparing?

Thanks in advance! 😊