I love that I can link Coros & Rouvy for activity syncing, but it's annoying that Coros doesn't know they are Indoor Bikes and you are unable to change the activity type from Road Bike in the app.

I know I can connect all my devices to my watch and record it separately, but it's nice that they all sync anyway.
Seems like they missed something here to mark Imported Rouvy rides as Indoor Bike.

I’m looking to buy a Coros pace 4, but am hoping to use it in a couple settings. Primarily looking to wear it for keeping pace on runs, but I also play field hockey and basketball and was hoping to tape it to my sock so I can track my distance ran.

Has anyone tried this? Does it work?

I tried an old Apple Watch and it won’t work unless it’s on my wrist - just wondering if the Coros would be the same.

Do you think the Suunto Race 3S is a good choice for a watch? I’m torn between it, the Coros Pace 4 Pro, and perhaps something from the Garmin lineup.

I’ve read other posts about this but I’m a little baffled. Training for a 50k and after a HM Pr on September 25th my running fitness TANKED, while my mileage and pace have remained consistent throughout. I’m trying not to read into it too much, sticking to my training plan and listening to my body, but after six months of training and seeing improvement it was a bit demoralizing.

The backlight just stopped working whenever I pressed any button. Tried to switch to different settings for backlight gestures but it still wouldn’t turn on. Had to restart the watch by turning it off and then on. Has this happened to anyone before? Debating whether to reach out to ask if this is a defect, but this has only happened once so far.

Once again… I absolutely love this watch, it’s perfect, but where’s the Nomad watch face? Like it can’t be that hard. Every other watch has it. Your top of the line watch is missing the best watch face you have!

Hi Coros official!

Any hint if the new Vertix will be here before the end of 2026? 

Hi there, you already saw it… it’s out now, but now… what to do?

What's new:
* 3.5" touchscreen (Dura 1: 2.7"), display now on top, solar panel moved to the bottom
* 99 g, carbon back plate and aluminum frame
* Voice control with mic and speaker
* Offline rerouting, climb detection without a loaded route
* Still 120h battery (70h dual-frequency), solar adds up to 2h per hour of direct sun according to COROS
* The rotary dial is gone

And here's the catch: $499 / 499 € without a mount, $549 / 549 € with one. The Dura 1 launched at $249 / 289 €. That's roughly double in the US and over 70% more in Europe.

My thoughts:
1. The Dura 1 was THE value pick. At $499, COROS is now playing in Garmin and Wahoo territory. Is the software good enough for that?
2. 120h battery sounds amazing, but honestly: who here rides long enough for that to matter day to day? I charge mine every other week anyway.
3. 2:1 solar in Germany in November? I suspect this is mostly a summer feature for ultra riders.
4. Voice control on the bars: real benefit in wind and with gloves, or a gimmick?
5. No more dial, now touch plus haptic buttons: Dura 1 owners, do you miss the dial?

What do you think? Who's switching, who's staying with Garmin/Wahoo, and why? I'd especially love to hear from people who've been riding the Dura 1 for a while.

Got an Apex 2 back in 2023 as gift for my wife. It worked flawlessly for almost 3 years, then right after a firmware update the battery started draining like crazy. First it lasted few days per charge, then 1 day, and then one fine morning it just died. Wouldn’t even turn on when plugged in.

Restarted it, factory reset, battery calibration,… tried everything, nothing worked. At that point I was already mentally preparing my wallet for a new watch.

I wasn’t expecting much. I just wanted COROS to figure out whether it was a hardware or software issue, since I also have an Apex 2 Pro on the same firmware with no problems. So I opened a ticket in the app. After some back and forth, support offered to take back the old watch and give me a 20% discount on a new one. Honestly, that already surprised me 😆

Then after I shipped the watch back, they told me they’d replace it with a brand new Apex 4 42mm, completely free, even though the old one was long out of warranty.

TL;DR: My out-of-warranty Apex 2 died from a battery drain issue after a firmware update. COROS first offered 20% off a new watch, then ended up replacing it with a free Apex 4. If your watch has weird “General Use” battery drain, open a ticket.

Had my watch for about 5 months now and mostly no complaints. However, after yesterday's run, I am a bit concerned for my upcoming marathon.

I started my usual base run, and my HR sky-rocketed to zone 3-4. I was going realllly slow. Waited .5 miles and stopped and figured it was just cadence lock. Restarted the run, and the HR was normal and is low zone 1.

This has been happening. My concern is that I can't restart during the marathon. I DO NOT want a HR band.

[SEPERATE ISSUE - NEED SUPPORT TEAM]

I'm a huge fan of the product and have been a public proponent of it on here and other forums. However, I have to say the support is freaking horrible. I have ONE case open for over a month (652063) and I'm not getting answers to it.

There is a long run that is not syncing to my daily calories/excersie time/steps total.

I just upgraded from the pace 2 to the pace 4 after the pace 2 finally died. I enjoyed the pace 2 and felt it read my biometrics accurately enough for my use.

But I’ve been using the pace 4 for about 3 weeks now and it is not getting my heart rate correct, particularly during elliptical workouts. I’ve tried using the arms and not using the arms of the elliptical to see if arm swing was the factor and the watch still doesn’t update.

Right when I stopped, the heart rate has jumped anywhere from 10-30+ bpm.

I’ve tried wearing it on both sides of my wrist as well to see if the optical sensor would read better over the vasculature. No luck.

I haven’t been able to run much due to some training pains, so I can’t speak to the accuracy there.

Has anyone else had this issue or have tips other than buying their additional heart rate wearable? That seems to defeat the purpose of having the watch in my opinion but open to thoughts.

I’m a very casual runner so the additional heart rate monitor seems extreme for my use case.

Just curious what everyone likes to see for training and race. I’m a fan of seeing heart rate, lap pace, current pace, and total distance. For training runs I also keep track of the actual time to make sure I can get home and shower before work in time.

How do i track AMRAP workouts like Cindy on the Coros Pace 4?

Hi, I have been testing to track my strength training with my Pace 4, and I created structured workouts in the app beforehand. I really like to not have to use my phone all the time and just log it on the phone, but there are some easy things that need to be changed for it to be a good experience:

- During the cooldown between sets it shows me what exercise the next set will be, but not the weight I planned for it (and potentially the reps). For bench press for example, I use the cooldown time to change weights, so they really should be shown together with the countdown. I found this personally very annoying.

- We need an option to disable automatic rep counting. Sometimes it works, sometimes it does not. Sometimes it counts more reps, and then it will automatically proceed to the cooldown time while you are halfway through your set. Just give an option to disable it please. I could disable "automatic advance", but then I also don't get a countdown timer between sets at all, which I really want to have to not have too long breaks.

These two changes would make the experience really nice, as it it now, it's kind of annoying actually. Is there any chance to implement these? From a technical point, it feels kind of easy.

Some additional things:

- When planning a training, it would be nice to be able to duplicate whole workouts in case you want to create some variation, instead of making a new one from scratch. Also an easy way to duplicate sets in the training (I saw that I can somehow duplicate groups, but not individual sets?)

- A way to create workouts on the PC, either in the Training hub or a separate App would be nice...

After finishing a workout, watch asks me for the gear I used, so it's automatically saved with the coros workout. Now, if I want to sync the gear details to strava instead of strava using my default shoe, is there any way to do that?

This is driving me crazy: I have an Apex 2 Pro, and have all notifications disabled, but my watch recently started getting notifications from my Gmail account. A google search gave the following steps: I went into the app on my phone, and went to Profile > Apex 2 Pro > Notifications, but there doesn't seem to be anything that shows it has access to gmail, or to give me any notifications. I can't seem to find any other setting that would control this, and I don't want my watch to give any notifications from my phone, does anyone know how to turn this off for good?

Hello!

Lets see if somebody can help me. Back in July I completed a 70.3 but I had an issue on the bike computer (or watch). So, as you know, when racing a tri, the Coros Dura will automatically connect the Pace Pro and Mirror it. The thing is, when I go ride, I only use my Coros dura which connects to my Assioma duo (dual side power meter), I have no issues normally. But in the triathlon, my watch or Dura, connected only to one side. Once you are on the race, you cannot access any sensor nor anything in the coros dura or Pace pro, so you are stuck with half the power. Not the biggest issue, but Id like to avoid that happening this Saturday (another race).

So, how should I add the sensors? Should I add both, R and L pedals separately to the pace pro? Should I just remove all power meters from my pace pro and my coros dura will connect to the assioma?

Thanks for your feedback!

Does anyone know how to upload one workout from Oura to Coros? I got my exported data from Oura but it's just a number of spreadsheets. I know I need to convert to a .fit file, but not sure where to start with all the spreadsheets. I only want to port over one workout to Coros. Thanks in advance!

I just bought the watch today. And it looks great. However, the battery on it is 59%. When I plug it in, it does not appear to charge at all. I re-oriented the charging block itself. I also moved it from a USB-C port, to a usb port on a computer. Still nothing. Screen goes dark after a moment.

I do get a vibration as if it connected to charge. But no indication it is charging?

Any thoughts? Maybe it is something I’m doing?

Question to all Coros Pace 4 Pro owners and Coros team: Incoming call notification issue. During an incoming call, the notification and vibration very often pop up on the screen for only about 2 seconds and then completely disappear. Right after that, the main watch face reappears, leaving you completely unaware that someone is calling you. Sometimes the call notification stays on for the entire duration of the call, but that happens rarely. Does this happen to everyone? I can't seem to find any pattern as to why this occurs. This is a basic core function that should just work reliably. I’ve never encountered such an issue on other smartwatches. Even my older Coros Vertix 2 and Apex 2 Pro display incoming call notifications properly for the entire duration of the call. I don't get it—even cheap $70 Cospet Pulse 2 watches handle this correctly. Additionally, I want to mention that 8 seconds for the screen timeout—after which it turns off—is way too short. It would be great if Coros could add an option for a longer screen timeout—at least up to 30 seconds, or ideally a full minute. But first and foremost, the main issue is the incoming call display bug.

Has anyone else run into this?