A frame hut I made at my local ski resort over the course of 2 days, walls are next

Hi everyone!

I got into bushcraft earlier this year. I found a remote spot near a river and just started building a cabin using only hand tools and natural materials (mostly dead wood and stone). I basically learned everything along the way by reading posts in this sub and watching YouTube videos.

As the cabin started taking shape, I also got into a few side projects, like building a waterwheel-powered rotisserie, learning how to fish, and making some other useful stuff around the camp.

This is a short trailer for the full build video I'm currently working on.

I'd really appreciate any feedback, both on the video and the build itself. I'm still learning and always looking for ways to improve my skills!

earlier today i tried to force a patina on my bps adventurer by submurgering it in room temp white vinegar for 90 minutes but as a lot of people correctly pointed out, it did pretty much nothing. you can see the results in my prior post.

this time i took the scales off, used barkeepers friend to get rid of the old patina, brought some apple cider vinegar to a boil and left the blade in submurged in a cup for roughly 40 minutes.

does this patina look okay? its definitely darker than in my previous post but what i'm worried about is this odd colored stain on the branding side of the knife. what is that?

i tried degreasing and re etching multiple times but couldnt get it to etch uniformly. i dont care how the patina looks, i just want to protect my knife from rust as best as i can. did i do it right or will i have to try again?

edit: i redid the patina and posted the results, id really appreciate it if you all could take a look on my profile and provide input

bps adventurer. i submerged the blade in a cup of vinegar for 90 minutes but since this is my first carbon steel knife i'm not sure if i did it right. i don't care about how it looks as long as it will protect the blade from rust as best as possible. is it ok or should i redo?

I can't afford a hot tent and wood stove, so looking at hot tenting in my back yard this winter.

I'm probably going to grab a decent heavy duty / extreme duty poly tarp and install a stove jack. for the stove, right now I'm looking at the Vevor Ti Alloy model for $255 CAD.

I thought about asking on the hot tent reddit, but thought I'd ask here first, since you;'re more my people than they are, LoL!

Anyone else have this knife? What do you think of it?

So far I like the back as it's 90 degrees and probably can work a firesteel. I like the scandi. And I like the size of the blade, as you can probably sharpen it a lot before it becomes too thin.

went out today with two little (and cheap) tarps i got recently to try making some basic ridgeline shelters.
80”x55”, $15 and 104”x80”, $23
very lightweight and compact

I’m relatively new to bushcraft, I’ve got a ton of woods on my property so I recently started clearing a trail, trying to get deep into the woods so I can set up a camp. All I’ve really got is a hatchet, and it’s been doable but not efficient. I tried a typical wood saw but it gets jammed the second it hits a lick of moisture. I’m trying to look for a durable handsaw that can cut through branches about the size of a hockey puck, maybe a bit bigger. I’m in Massachusetts, I’m having to cut through mostly deadwood but occasionally green wood. Any tool recommendations, or just tips in general would be greatly appreciated.

like getting some camping equipment and just walking into the forest and not looking back? can you do it on the Appalachian Mountains? wont the rangers force you to leave?

​

I made this stone adze for following out logs to use as a boiling container instead of chisiling with stone

Let me hear what you guys use! What are your habits? Any good brands? Personal favourites?

For many years, all my clothes have doubled as both outdoor clothing and workwear, which naturally means going through a lot more clothes. So now I've dedicated a set of clothing specifically for outdoor use. And I feel it's nailed down to great stuff, for decent money.

I've tried Fjällräven trousers (bought second-hand) and Garphyttan. Fjällräven is too expensive. Even second-hand prices are ridiculous these days. Garphyttan has become too expensive as well, although I was really happy with their gear when the company first started.

I've also worn quite a few pairs of Danish military M/58 trousers over the years. They're great. Tough as nails, heavy.

But the trousers that win (and probably will for good from now on) are Swedish M/90 trousers. They're the absolute best trousers for me. Plenty of room, can be buttoned into boots laces and tightened around the boot. The pockets are flat, so they don't snag on things, and they're secured with heavy-duty zippers.

I wear them with a flat velcro belt and suspenders.

They cost 470 DKK (approximately $70 USD) brand new from Rodastjarnan. Brilliant pants. Heavier fabric than ACU pants.

Gaiters

Fjällräven gaiters made from G-1000 fabric. They stay in place without having to tighten the elastic at the top. My legs don't sweat underneath them, and they don't get damp. But man, is it nice not having wet trouser legs! They reach up to the knees.

My boots (spring to autumn) are Lowa Desert boots, so they're very breathable desert boots. I haven't had wet feet yet, but the gaiters must also provide some extra protection when walking through tall, wet grass.

1. Upper body layers

My upper-body clothing varies, but I always wear an Italian army merino wool undershirt. It's cheap surplus stock, costing 70 DKK (approximately $10 USD). It's taken me two years to wear out my first two, and they're still usable, really.

Beyond that, I change my layers depending on the conditions.

Cheap shirt from Harald Nyborg (Danish hardware store)

Good quality, heavy fabric that can be waxed, and two pockets. I bought it slightly oversized.

Cost: 150 DKK (approximately $22 USD).

When it's a little chilly: Carhartt vest

Worn over the shirt. It has a fleece lining and blocks the wind.

Bought second-hand for 500 DKK (approximately $75 USD). Carhartt just lasts amazingly, been using this a lot and constantly while renovating a house, no real signs of use.

When it's windy and cold: Härkila Annaboda V2

This is an expensive piece of clothing — the most expensive clothing item I own. I found it on sale for 1,000 DKK (approximately $150 USD), half the original price. It's 100% wool knit with a windbreak liner.

The shirt fits over it, protecting the knitwear from branches and similar hazards. The Annaboda is never an outer layer!

Anorak

Costs 50 DKK (approximately $7 USD). Home made from a blanket.

It's not extremly warm because the blanket isn't full wool (but an unknown mix) However, it's large enough to fit over all my other layers. And it's a great outer layer in everything but the warmest of summer.

This is my go-to outdoor clothing setup. The items aren't particularly expensive in general, and this is where I've ended up with a combination of clothing that works exceptionally well for me. Tough stuff, not breaking, having been used constantly for use and not flammable from a few sparks.

So what's you favorite clothing? Any always use items? Any good philosophies?

My little hiking kit . I live about 30 minutes outside of Rocky Mountain National park . This setup has me pretty covered on nice days .

The only thing we brought to the river was a knife, juicy ass chicken, beer(ofc), and a mindset to make it happen.

I had the image in my head of this build, i needed:

3 medium sticks for the rudder,

1 fat huge stick for the shaft,

2 Y stick for the holders,

16 small sticks for the fins

We also had a roll of duct tape and paracord.

We had a group of people, so we were able to parallelize: 2 searching crew, 2 fin crew, 1 carving dude.

The searching crew was looking for sticks. The fin crew was taking 3 small sticks and tying them into a wide H shape. Then we would wrap duct tape around it. The carving dude was cleaning the big stick so that the chicken could go on it. Once the fins were finished (6), we attached them to 3 sticks, 2 on each end.

Then we all tied the 3 sticks to the main shaft.

The chicken had to be marinated, and the fire had to be made. The chicken marinade was Thai chili sauce, garlic, ginger, fresh pineapple, salt, and pepper. Pineapple grilled over the fire made a nice side.

Once the fire was ready, we put the 2 Y sticks in and put the stick on them. To help the shaft turn, we had to put 2 empty beer cans as "bearings".

It was beautiful. It did not look real.

It was the best chicken i ever had and ever will have. We jumped at it like animals. Only the carcass was left.

(ofc we cleaned everything up, left no trace.)

Axe is 900g overall, I can do eveything I need with it and it's not heavy enough to be a burden. The small knife is great forfine tasks.

Was supposed to be functional… ended up just making it for display. Love how this baby came out. Gold Sheen is just the best… it’s smooth and predictable… at least this one was! A combination of English and American walnut compliments it perfectly!

Does anyone have some snow sled recommendations for snow shoeing my camping gear? I’ve seen how expensive some of these pulk sleds can be and wanted to see if anyone had some other recommendations, thanks!

Spent some time outdoors with my FLISSA Bowie Knife recently, and I've been pretty happy with how it feels in use.

The blade has a nice weight to it, which makes it feel solid when working with wood. I especially like the handle. The finger grooves give me a comfortable grip, and it feels secure in my hand.

The curved blade shape is also pretty interesting. It feels better suited for rougher outdoor tasks than precise carving, but that's pretty much what I wanted from a knife like this.

I'm trying to find a good video or tutorial on how to wrap my walking stick handle and make it look nice. All the videos I've seen so far have been just wrapping a straight shaft, while the one I have has got angles I'd like to wrap as well and ideally make it uniform up the shaft, incorporate the crook and then back up towards the top again. I've attached pics to show the shape and basic idea I'm after, except the wrap would go to the end of the crook. Any help would be greatly appreciated, I'm preparing a few winter projects to keep busy and learn new skills while I'm at it.

link: https://youtu.be/mpnfkY-iCQA A short and sweet video by Thibaud Morthelier (@TheudBald on YouTube). He is also on instagram as lafrontiere_outils and posted the clip there too. https://www.instagram.com/reel/Dc004_por-n/