Hello everyone, I'm looking for a new job, and I have an opportunity in a company that uses Niagara systems.

Never used them, never seen them, what's everyone opinion about it ? Is it good ? Easy to get grips with ?

A year ago, I made a post where I said i was suspicious of the fact that Tridium are retiring the Edge10 without a replacement, frankly it felt like too good value for money and was probably harming the sales of Jaces.

Seeing as there still isn't a replacement is it safe to think that there is no plans for replacement of the edge 10? Has anyone heard anything?
For anyone saying that there already are alternatives there are none that I can see that is programmed using standard kitControl modules.

I have done BTech in Mechatronics i have joined as an graduate engineer in an consultancy firm since my BTech background complemetnts both HVAC and BMS which engineer role i should take for a better career interms of growth money flexibility?

Looking at my locals contractor list and there are a lot of control companies, however most of them have only mechanical in union and controls non-union. Why is that?

As the title says, I’m looking for a way to get my foot in the door. I’m currently a college student in Orlando pursuing my associate degree in Energy Management and Controls Technology, and I’ve been looking for entry-level jobs or internships in building automation and controls.
So far, I’ve applied to Carrier, Mitsubishi, McKesson, OUC, and Trane. I’ve also been checking LinkedIn and Indeed, but most of the positions I come across want someone with previous experience.
If anyone knows of any entry-level opportunities, internships, or companies worth reaching out to in Orlando or the surrounding areas, I’d appreciate the recommendations. I’m also open to sharing my resume if anyone would like to take a look.

went through psychrometrics in hvac school and treated it as the theoretical section that would not come up much in actual work. three years in and it comes up more than i expected specifically when diagnosing humidity issues, sizing equipment for high humidity environments, and understanding why a system that looks correctly charged is still not dehumidifying properly

the challenge is applying the concepts quickly enough to be useful during a service call without spending twenty minutes with a psychrometric chart trying to remember which axis is which

how have working technicians built practical psychrometrics skills beyond what the training covers and what has helped it click in the field

I've been building a variety of things, mostly because I enjoy it, and to be up front AI assisted at varying degrees. I decided compile it all into a dedicated space, https://basidekick.com

What I have on there now;

• Buildings: walkable, interactive buildings, in world BAS. early build. plan to have numerous buildings/scenarios
• Modules: 3D interactive scenarios fully animated
• Field Guide: animated, textbook style explainers
• Niagara: a couple open source modules and compiled learning resources

All free and plan to keep it that way, no accounts, may offer a newsletter at some point just to inform on updates on the site/resources. Goal is useful, maybe some fun, resources for people in and outside of the industry. I also intend on making them all downloadable and have the ability to embed them in your own sites if desired.

Just wanted to share and potentially get some feedback or requests even for future additions.

Hey, I work in BMS design, with a background in electrical/HVAC. I’m in my 20s so not a lot of experience.

I’m enjoying some aspects of the industry but unsure whether it’s what I want to do long term. Just find it a little uninspiring, and not very interesting.

Has anyone moved away from BMS into another career or started their own business? Or do you know people that have?

Curious what people ended up doing and whether they preferred it.

For Milestone 10 of my conveyor sorting digital twin, I tried the simplest thing possible: I stopped keeping decisions as a one-time startup task and moved them directly into the repeating frame loop.

​No complex scheduler or new architecture classes—just a direct sequence running every single frame:

​Observe current data

​Make a decision

​Issue a command

​Move the physical box

​Check the sensor and update memory

​Suddenly, the machine has a true repeating loop. For those writing custom simulation or control loops: how did you structure your first unified execution pass before scaling it into a proper engine?

Hi, I'm not in the building automation industry at the moment but it looks very interesting and I'm currently learning more about it in order to assess if a career in this space would be a good fit for me.

Would be grateful for any help with the following questions:

1. What's the work / life balance like? I don't want to work weekends - are there any roles in this industry where that's possible? (I may be open to weekend work for a short period as long as there's a clear path from there to a role where I'm not working weekends again).
2. I would eventually like to earn £80,000+. Is this doable in the UK?

Crossposting in r/BuildingAutomation and r/HVAC so I can hopefully get some code references. I have looked around but am clearly not Googling the right key words lol.

I am an electrician doing HVAC controls for a job and am trying to run 1/4" pressure tubing from RTUs to 2/3 of the way down the duct runs on the floor they serve per my engineer's requirements. What code covers how I'm supposed to safely run this pressure tubing through the HVAC duct shafts and shaft walls? The shafts are fire rated and there are fire dampers on each floor. I am only familiar with electrical code in the NEC/NFPA 70. What I found online was:

IMC 602.3.5 Pneumatic Tubing
Combustible pneumatic tubing exposed within a plenum shall be listed and labeled as having a peak optical density not greater than 0.50, an average optical density not greater than 0.15, and a flame spread distance not greater than 5 feet (1524 mm) when tested in accordance with UL 1820.

I understand that free air tubing is legal in the shaft if the tubing I use is listed and labeled. I know I need to have a sleeve penetrating the shaft walls to get the tubing inside the shaft. I do not understand if there are any vertical support/strapping requirements or "the tubing cannot touch the duct" type rules.

Do I just run the tubing where ever there's space in the shaft and hope the insulators and drywall guys don't kink it when they do their jobs? I can't wait until the shaft walls are up and then run the tubing, there is very limited open space around everything and it would be very difficult to fish after walls go up. Is it okay to ignore the shaft and instead drill holes through the top of the studs that surround the structural steel of the shaft and run the tubing inside the drywall sandwich of the shaft walls? That is what my foreman advised but he wasn't sure it was legal. Does anyone have relevant code references beyond the one I copy pasted above?

Salary - $100k -$140k - Houston, TX

Ready to take the next step in your BAS career? We're looking for a Building Automation Project Manager to join the team!

If you have experience managing building automation projects and delivering controls solutions, let's connect.

📍 Apply here:
https://jobs.dayforcehcm.com/en-US/htseng/CANDIDATEPORTAL/jobs/9278

Know someone who would be a great fit? Tag them or share this post!

#Hiring #BuildingAutomation #BAS #ProjectManager #HVACJobs #ControlsEngineering #SmartBuildings #NowHiring

Quick question for those doing BAS submittals.

On a small/medium building (say an elementary school, ~300 points), how many hours does the full submittal package take you?

And which part eats the most time and feels the most repetitive? Sequences of operation, points list, riser, control drawings/wiring details, BOM, cut sheets, something else?

Context: I'm a BAS engineer building a tool that already generates the points list and the riser diagram. We're trying to figure out what to tackle next, and I'd rather ask people who actually do this than guess.

Happy to share what we've built if anyone's curious.

Before this milestone, my conveyor digital twin didn't actually have a unified execution order—it ran on two completely different schedules:

​The Setup: Page load runs once \rightarrow shows destination \rightarrow decides routing \rightarrow creates a command.

​The Loop: Runs every frame \rightarrow moves the box \rightarrow checks sensors.

​Because our destination never changed, the fact that our decision happened once at startup and was never touched again stayed completely hidden. The machine kept running, but its decision lived in the past.

​For those building control logic or simulations: how did you handle the transition from split initialization tasks to a unified runtime cycle?

Daily conversation with myself about customers

I have two modulating valves and vs circulating pumps on a hot water system that all of a sudden are not getting commands from Metasys anymore (I have to override manually and they respond to my input). How do I reconnect this automated logic?
Metasys 11.

Hey all - have a building with 13 year old heat pumps. After commissioning, we were left with a Johnson Controls Facility Explorer display and interface card to connect to the JC FX10 controller on each heatpump for diagnosing issues.

Finding that when we connect it up, now it says "Cannot connect, port 2". Buttons do nothing on the display. This has previously worked, so not sure what's changed unless the display is toast.

Any suggestions? Is there any interface we can buy to connect a laptop up instead?

FWIW, we do have JACE devices and web control, but it doesn't show the information that connecting directly with this display has when troubleshooting.

Hey all. So management just installed a new visitor check in system for our front lobby but I'm not sure how to connect it to our old door system. Atm what happens is when a visitor signs in with the tablet, we still need to put their details in the old door software so they can get badges. It seems redundant with the new system going on but not sure how we can link the two together. I know there's probably APIs and webhooks, but if we got the system without being consulted, how can we approach this?

Hey everyone!

I've been working on a software application for Euphrates Group designed to make control panel estimating and design workflows easier, and I'm looking for a few people who would be willing to help me beta test it.

The application includes features for:

\- ⚡ Control Panel Design — Tools for laying out and working with panel designs.

\- 📋 Bill of Materials (BOM) — Build and manage component lists for projects.

\- 💰 Cost Estimation — Calculate component costs and project pricing.

\- 📊 Margin Calculations — Estimate project margins based on the individual components in a BOM.

\- 🛠️ Component Management — Work with component libraries and related information.

\- 📄 Reports & Exports — Generate and export project information.

I'm looking for people who can spend a little time exploring the application, trying out its features, and letting me know what works well and what needs improvement.

You don't need to be an expert! Whether you have experience with electrical control panels, estimating, or just enjoy testing new software, I'd appreciate your feedback.

This is an early beta, so there may be bugs or features that need some polishing. That's exactly why I'm looking for testers!

Interested in helping?

Comment below or send me a DM, and I'll share more information about the beta and how to get started.

I'm especially interested in feedback on usability, workflow, and features that would make the application more useful in real-world situations.

Thanks for taking the time to read this, and thank you in advance to anyone willing to help!

— A developer at Euphrates Group

Processing img 1tmc2im64rwh1...

INGINIR, since 2018, was built with the engineering team in mind. Unlike the others in the market, they created an that the Ai controls the building with guardrails built by the company and the local team. The engineers can always overwrite the commands and the system learns. More like an assistant rather than taking over everything, which sounds scary and I've heard other platforms have had that issue. A plus side, is that the company is agnostic, so they are not trying to sell you any particular manufacturer. Their AI changes VAV setpoints, boilers, cooling towers, and AHU/RTU setpoints depending on predicted weather and internal temperatures, so it seems like a good idea instead of having your team running around everytime someone calls for too hot or too cold calls. Buildings who have adopted INGINIR, are the ones who say it is a great tool, not a system that you have to fight with or worry about.

INGINIR does not use generic Ai/ML models from ChatGPT, Claude, Google, etc. Every building is different and INGINIR realizes that every building needs its own set of rules. The company uses localized historical and forcasted weather with Occcupancy and traffic monitoring throughout the building to ensure the adjustments are made to save energy, while still focusing on tenant comfort.

INGINIR thinks that Ai is not a replacment, but an assistant. You have autopilot, BUT YOU STILL NEED A PILOT!

Unlike the others: INGINIR Controls, what others just Monitor.

Check it out: www.INGINIR.com

Houston’s Controls group is growing, and we want an experienced Controls Technician III on board.

Click here to apply and learn more:
https://hubs.la/Q04yKcWs0

#HoustonJobs #BAS #ControlsJobs #NowHiring - Payrate $45hr - $55hr - Email - [jason.pineda@hts.com](mailto:jason.pineda@hts.com)

Recently graduated computer science student looking for a job in automation and controls. I’ve been applying to automation technician roles and any entry level job within the field for a while now and I’ve heard nothing back.

I’ve contacted probably dozens of different employees inside of controls companies and have only received one interview which I’m waiting to hear back from and just a bunch of internal referrals that lead nowhere. I’ve been at this for months. I don’t know how else I can possibly get an entry level role in this field and this post is my Hail Mary. If any of you know anybody at a company where I am located I would be beyond appreciative of any sort of referral or connection that could be provided to me.

My background is in analytics and data science but I do have a small home automation project with a raspberry pi. Paired with my CS degree, I think I could be qualified for at least an interview.

Thank you for reading this post, I just don’t know what else do to at this point and am getting discouraged.

Hi all. I'm working in BAS field for the past 3 years. I joined Siemens right after my graduation. I have a bachelors in Electronics engineering. I mostly write and debug programs for BAS controllers, once in a while, I work with design and graphics as well. I work for project sites which are located in US and Canada, but I work from India. I have noticed that my disadvantage is not having access to the sites directly. I cannot do hands-on, R&D from these service centers in India. I also feel that the work culture in other countries is much better than here. So, I want to ask, what are my chances of getting a visa sponsored job in your country for my experience? What skills are the recruiters looking for? Any strategies from people who are already working as expats please?

Any suggestions would be much appreciated, thanks in advance!