I have been trying to figure out this one out for 3 days now. I followed everything in the description, built a roof to block line of sights, added armor stands etc but whenever the farm produces around a stack of shell, the boats break leading to farm being broken. I even downloaded the world from their discord, where the boats in that world kept breaking too! Now I'm thinking this must be 26.3 problem, is there anyrhing I'm missing?

I put all these zombies in boats and had them fully sat down and everything. After a while, they all left their boats and either fell off or got stuck like this. I have no idea how this is even possible, if anyone knows I'd appreciate it.

This is a module I designed for an upcoming project (actually finished, but Mojang decided to break it). It allows determining the exact direction to a player regardless of distance, outputting the result as an explosion that points to them. This module includes the required silverfish generator and a trident storage and replacement system that allows selecting from 6 targets.

Hello, I'm about to update my world from 1.21.4 and was hoping if anyone have an Up-to-date list of all farmable resources in Minecraft. I was told RaysWorks has a list/spreadsheet but I can't find it through google. Can anyone provide me a link?

Curious if this has been made before: a machine (presumably made of multiple flying machines) that can take an arbitrarily sized structure and turn it into a single block stream for use in a tnt blast chamber or cube maker.

I am imagining it to be a fairly complex build but almost certainly possible, ilmango made an ancient debris collecting machine (https://youtu.be/hR2Nw1P57iQ?si=46Wx1GrUNIWBTzs6) that essentially does just that, but has a few quirks and complexities outside of the scope of what I'm looking for, i.e. machine does not need to be liquid proof, nether proof or immovable block proof, and it should output the items as a single block stream.

Before I spend hours of my life on this, has it been done before?

Hi everyone,

I'm newish to big builds in minecraft and recently found a need for fireworks (elytra for the first time). I found this build on YouTube and it's marked as a 1.21.11 build and I play on 26.3. Could anyone tell me if there are compatibility issues before I devote the hours it'll take to build?

https://youtu.be/dnTokP11Zto?is=LSOP0cuAGJwBntKy

I found this villager separator, which is supposed to let one villager out at a time, in an older villager breeder within a build and I wanted to try it in the newest version of the game but I found that in any version after 26.2 pre-release 2, it always lets more than one villager out at a time. This was the only relevant looking change from that pre-release "MC-305475 - Tripwire above the player's head gets triggered twice when jumping" but I don't understand the exact mechanics of this to understand if/how that might have broken it. In the full build you then use a minecart to take the single villager since a minecart can't pick up a villager that is in a block that stops them entity cramming. I know there are other ways to store villagers like this but I find this specific method interesting and I am curious if anyone knows a method of entity separation that still works in the newest version

I'm trying to do this 3x3 golem sorter, but it seems to break once I add a second module onto the sorter. Golem A is trying to access Chest B which is not my intention.

Anyway to solve this? I'd tried a solid wall in between but it had no effect.

On Bedrock latest release FYI

Hey everyone!

I've been (somewhat) actively developing my mod schematic drag, and I wanted to ask the community who would use it what they would like to see!

Schematic drag is a simple mod to be able to drag schematics with your mouse while in freecam. It currently has 300+ downloads on curseforge and I wanted to get feedback from the community on features or fixes that would make the mod easier/better to use.

I've linked the GitHub in this post (which has the curseforge shields), so please feel free to look over the source. The initial commit was made with genAI assistance as I didn't know how to do more complex things like tracking where the player is looking. So far no other commits have been made with it!

I am thinking I just don't know enough about the sight and panic mechanics for iron farms but here is what I am trying to figure out:

-Panic during the night works, they try to sleep and get woken up.
-Night is VERY efficient and spawns a golem on every valid attempt.
-The first half of the day is inefficient, little golems spawn (before the sun is straight up)
-And for the second half of the day no golems spawn at all (after the sun is straight up)
-Then night comes and the cycle repeats

To my knowledge iron farms work 24/7, is what I am seeing new mechanics and normal behavior or is there a problem with villagers being panicked during the day?

(all this testing was done using a /tick rate 10000 command)

i found a spider and skeleton spawner pretty close to each other (about slightly less than 10 blocks apart) and would like to make an xp farm. not very pressed to be collecting loot since i just need levels for my enchanting for now and plan to make a proper mob farm eventually, but anyone has any simple setups or videos to direct me to for this?

i'm thinking of having both converge into one point where i can kill both types of mobs in one go, so just came here to find out what setup i can use considering spiders are bigger and would block any conventional hole used to trap mobs in one spot for easy killing. if it's of any importance, i play on bedrock edition!

what i know is typically people clear a 9x9x9 hole for each spawner and then have water flows to one point, but i was wondering in this case how to merge both into one and how big the area would be that i have to clear + how best to do the water flow to direct them to one spot.

The crafter has 8 slots blocked and no items.

In my opinion this is not a toggle, there is no opportunity for it to be out of sync as it is a solid state toggle of on or off depending if the crafter has items or not.

A friend said it best when I suggested the general consensus would cosider any copper bulb a toggle:

"bc then in shulker loaders when the shulker has items and read by a comp and then stop having items by that logic that is a togglestate also"

This a very good argument in my opinion and I agree, this is NOT a toggle. But im curious how people in TMC generally feel about this argument.

Like the trident killer is great it's just I've had to replace them so much so I figured I can change to a spear killers see how that goes

I want the 4 lamps in the middle, to be able to be copper bulbs, but i want to be able to guarantee that they turn off when leaving the area aka when pushing the button.

The concept works perfectly with lamps as shown in the video, but lamps are defaulted to off. So its easy.

How do I go causing deactivating the clock to always disable the bulbs? Is there a way to "memorize" the current state of the bulbs?

Edit: also i cant even base it off if a part of the redstone clocks dust, during the current tick, is powered or depowered, because of bulbs acting like t flip flops where it doesnt matter if its powered or depowered it matters the last time its been powered. Wether or not "x" dust is powered or depowered during the current tick seems fully irrelevant unless someone has a brilliant idea im overlooking.

Its worth noting. The bulbs are going to be CEILING bulbs. So I cant even use comparators to pull power as a method of the circuit being aware of wether or not the bulbs are powered. As comparators arent possible with flush ceiling lights.

Bedrock obviously, but i feel its not version specific.

Edit2: ive tried connecting an and gate to pulse the circuit if the redstone clock is turned off AND the bulbs are on simultaneously, but thats way easier said than done actually.

I've been experimenting with this concept a bit to get the benefit of Looting 3 while still being truly afk. I'm quite a noob so I can't really figure out how I could prevent the items from flying onto the air pockets I put there so the Zombie has a line of sight onto the Villager so he uses his spear. There's currently trapdoors on both air pockets but that's clearly not ideal; does anyone know more about this?

We recently made an Dungeon Crawler (a bit based on Decked Out) in our server, and I thought it would be fun to make a interactive map, where we track players / runs and allow players to review their run. Thought it would be share here.

Hi everyone.

I have been building what I call HS1 (Highspeed 1) a tube on our realm that can travel at a speed of ~101 blocks per second, for a tested maximum of 520 blocks. Overworld. Basically just for novelty from my house into the City Centre.

To travel end to end, it requires 6 stacks of Wind Charges, split evenly between two dispensers (for faster loading).

I want to build a system that places 3 stacks in each dispenser, no more. Then when the dispensers are emptied / the tube has launched someone, it begins reloading exactly 3 stacks.

I have ample room and resources to build a new system next to it.

Please advise.

I’ve created an automatic villager sorter/curing station that cures 6 villagers at a time. Once I’ve fed them all golden apples, I have a button which sends them all to the next storage area. The timing is working well enough to keep the 6 villagers from bumping into each other and they all get sent off as a group which is great.

My problem is in the next storage area, where my storage modules aren’t processing quickly enough. When one villager spot is taken, the rails divert to the next spot all the way down the line, but it’s not fast enough for how closely spaced the minecarts are when they arrive.

Does anyone have a system which can slow down/space out minecarts to give the system more time?

I have a few iterations of this circuit. Pretty fun to visually see what the redstone is doing. https://youtu.be/uEtZct2yt_o?si=tja1X937rQcFILT6 and https://youtu.be/2IrnjuieyT0?si=kRifsyp1IEfsQ8aU