Hello! I'm Ryan, Developer of the ForgeEFX DL-1 a guitar focused NAM player that fills all the gaps NAM is missing, pedals, workflow, etc.

I've built this on the values of true ownership, community and giving back so the Free version of this is unlimited, with no activation, no accounts (edit for transparency: gumroad, where I distribute the files, takes an email to get the download, you don't need one to login/use the vst etc), no installers, no tracking, no analytics. It comes as a zip file you can move around as you please, use it on any machines you want, even a friends for all I care... that's what ownership should mean.

We have an open source SDK for people to tinker, it comes without limits, and with 17 of my best DSP's i went through by hand and i chose the best ones from each category this is not a weak selection of 'good enough please upgrade' this is MY best, completely for free no strings.

In full transparency, I do have a paid version of this but I hope you genuinely see that the free version in its own unlimited right, and the open source SDK is genuinely free and in the right community spirit, it has enough in it to record even a couple of albums with!

This is new, I am a solo dev 😄, been a professional engineer for 20+ years now, I do use AI in my workflows, this is not 'vibe coded'

You can find us at www.forgeefx.com
You can read our change logs at r/forgeefx
And I am here (yes. a real human. spealling mistakes and all) to answer any questions.

Hi everyone,

Over the past few days, I've run countless tests, switching back and forth between three operating systems to make the version more and more stable.

To avoid having to repost everything over and over again, you can follow the journey of posts here.

https://www.reddit.com/r/AccessVirus/comments/1x6et6h/comment/ph92bmq/?screen_view_count=2

I probably don’t need to mention that this was done with massive support from AI, but I still believe that writing posts involving human interaction should NOT be done by AI. That’s why I wrote this post myself typos included xD.

Long story short.

As part of this process, I’ve also made the Access Virus TI hardware available natively on Linux.

So if you produce music on Linux and maybe have a real Virus TI at home, I’d really appreciate your help in making the native Linux version more stable.

To make it easier to follow the project, I’ve also set up this page.

https://derpsn.github.io/access-virus-ti-revive/

There you’ll also find a link to GitHub if you want to dive even deeper into how it works.

I look forward to your feedback. :)

Hi everyone,

I’m trying to understand some recurring audio issues I've been having on Linux. For context, here is my PC audio setup:

* Motherboard: Gigabyte B550M-K with Realtek onboard audio

* Device 1: Logitech Speakers (3.5mm jack) connected to the rear port

* Device 2: Fifine AmpliGame H3 Headphone (3.5mm jack) connected to the front port

* Device 3: Bonkyo M999 Condenser Mic (3.5mm jack) connected to the rear port

The Problem:

Across all distros I've tried on a fresh install (CachyOS, Nobara, Fedora, Arch Linux, Pika OS, openSUSE Tumbleweed), my playback devices (Device 1 & Device 2) do not output any sound after booting every time I play audio.

My current workaround: I have to install alsa-utils, open alsamixer in the terminal, and manually disable Auto-Mute.

Additionally, my mic always sounds robotic and has a lot of static/background noise out of the box. To fix this, I have to open pavucontrol (or Volume Control) and lower the mic input volume down to around 20–36%.

Questions I'd like to understand:

* Why does this not happen on Windows? On Windows, everything works out of the box without any tweaking.

* Is this issue specific to the devices I'm using (mic, speakers, headset)?

* Is this specific to the audio drivers/codecs (e.g., Realtek chipsets)?

* Is this a universal issue across all Linux distros/architecture?

* Does switching from 3.5mm Jack to USB devices change anything regarding these issues? (Do USB headsets/mics bypass these motherboard/ALSA quirks entirely?)

Would love to hear any insights or explanations on why Linux handles these audio defaults this way!

Thanks!

Performer is a live-performance plugin host for Linux: MainStage-style sound switching for keyboard players. Since I last posted, it's grown a lot. Here's what's new.

Plugin GUIs on your tablet
Any loaded plugin's own interface can now be opened on a tablet, phone or laptop, mirrored and fully interactive. You can pull the B-3X's drawbars, switch the Leslie, or page through a Kontakt library from the music stand. Taps arrive as real clicks, and the plugin's own on-screen keyboard plays from a finger. Pinch to zoom and full screen are there too. It runs in the browser, so there's nothing to install: scan the QR code and you're in. If the venue has no wifi, Performer can run its own network.

Songs and set lists
A song is a program on each keyboard plus a tempo. Set up the sounds, press Add, and it's saved. Build sets from your songs, reorder them, and use the same song in several sets (or twice, for encores). Two footswitches step through the set. On the tablet, the set list is the stage view: the current song in large type, your stage notes under it, and search once the list gets long.

Charts on the stand
Attach a lead sheet, a scanned chart, a text file or a ChordPro chart to a song. The tablet shows it, turns PDF pages a tap at a time, and follows the set from song to song.

CLAP support
CLAP plugins now load alongside VST3, LV2 and LADSPA, GUIs included. Surge XT works great. Windows CLAPs bridged with yabridge work too.

Tempo
A global tempo with tap tempo from the toolbar, a footswitch or the tablet, so tempo-synced delays and arpeggiators have something to follow.

Under the hood

• Settings you change inside a plugin's own window are now saved with your setup. This includes things like SWAM's expression controller assignment.
• Plugins load and scan in parallel, using as many cores as the machine has.
• Every plugin still runs in its own process. If a Windows plugin's Wine side dies mid-set, Performer reports that plugin as stopped and keeps playing, and you can reload it with one click.
• Quitting takes seconds, even with a hung plugin.
• Works on Wayland desktops (through XWayland) as well as X11.
• The on-screen pitch and mod wheels now look like real wheels.

Get it
.deb and .rpm packages, tested on Ubuntu 24.04, Linux Mint 22.3 and Fedora 43. Free and open source (GPL-3.0): https://github.com/dguedry/linux-performer

Feedback and bug reports are welcome!

I couldn't find the vocal tools I wanted on Linux, so I vibe-coded my own!

Linux has some great audio software, but I feel we're still missing more straightforward tools aimed at podcasters, YouTubers and content creators.

So I've been using Codex and JUCE to build Vocalis Audio, an open-source VST3 toolkit for REAPER.

So far, I've made two plugins:

• Vocalis Rider Live – automatically balances vocal levels.
• Vocalis Voice – helps shape and polish vocals with dynamics, delay, doubling and reverb.

The goal is to make vocal processing a little easier without needing a complicated chain of plugins.

Both are still experimental, and I'm learning as I go. The source code is available on GitHub, and I'd love some feedback from fellow Linux users, especially anyone making podcasts, videos or voiceovers.

GitHub: https://github.com/etakanaka/VocalisAudio

Hi everyone,

I recently switched my desktop over to Kubuntu and was having a great time until I realized my audio interface did not work under linux, and no community fixes existed. Luckily, we live in a time where creating a driver and control panel is remarkably easy once you capture the USB traffic in Windows using the official drivers. Technically it's a "User-space USB driver and PipeWire/JACK audio daemon for the TASCAM US-1641 on Linux, with a PyQt6 control panel."

So just in case anyone needs it, here it is: https://github.com/Aerankas/tascam_us1641_linux

I have not full tested the installation because I don't have a clean environment set up readily to do so, feel free to raise issues on github.

Happy recording!

Hey everyone,

Tired of menu-diving on the TR-8S when working inside a DAW, so I built ReplicantTr8s—a free, open-source VST editor/bridge to integrate the hardware directly into your projects.

• What it does: Automate and control TR-8S parameters straight from your DAW tracks with a clean visual UI.
• Cost: 100% free and open-source.

🔗 GitHub:https://github.com/DanimanX/ReplicantTr8s

I’d love some help testing edge cases across different setups. If you have a TR-8S, give it a spin and let me know your DAW/OS and if anything breaks or feels missing. Feedback and PRs welcome!

¿Qué distribución de Linux me recomiendas usar para que AV Dexed sea lo más compatible posible con mi fork de Dexed (el plugin de emulación Yamaha-Dx7)? EDIT: I have an ARM Mac (M4) and a Windows PC (i5 12th).

On the plugin side of this subreddit, it seems to just be people vibe coding eqs, what if we started moving up to more complex plugins.

Why the hell do I need another EQ or analyser? I already have like 5 of them.

Why not an accurate pitch correction tool, or a sampler like logics.

This is just what I think, whether you like it or not I really don't care. Good day

I guess to start with, are you running that all the time or only while working in your DAW? I often see people saying they are running 64 samples for their buffer size and I really don't understand how. I'm running 256 as my normal buffer because I started to get skips and the like if I ran 128. I imagine if all I was doing was using my DAW, I could use 128, but 64 seems like it would be too far.

Back on Windows, I always used 128 for my ASIO buffer, but of course that's only for ASIO; WASAPI is probably more like 1024, which is about the same as the standard Pipewire buffer size for desktop use. When I came to Linux, I started out trying to set Pipewire to 128, but if I was, say, watching a video in Firefox, even just opening Ardour would cause it to freak out, so I upped it to 256 and have had no issues since. But it's not like I have a weak PC, I'm running CachyOS with a 12700K (with 16 GB of RAM) and I have followed this guide to mostly optimize my system. I am not using a real-time kernel, but if I run the rtcqs tool in that guide, the only things that come up are:

• CPU not set to performance, but... it is? Not sure what that's about. System clearly shows it is set to performance.
• SMT is enabled.
• Spectre/Meltdown mitigations are still on (I'm not changing that).

Everything else is okay:

• I am part of a user group with sufficient rtprio (98) and memlock limits
• Valid kernel configuration found
• High resolution timers enabled
• System is using a tickless kernel which is using threaded IRQs
• Realtime priorities can be set
• Swappiness is set to 10
• Not sure what either of these mean, but:
  • USB port xhci_hcd with IRQ 125 does not share its IRQ
  • Soundcard snd_hda_intel:card0 with IRQ 171 does not share its IRQ

So as best as I can tell, I've done everything to set up my system, short of fully committing to a real-time kernel, but given that my computer is mostly just for general use and only occasional audio production, my understanding is that that is neither necessary nor recommended. Is there something I'm missing? Or are you guys just only talking about using 64 samples while doing audio work and not for general work?

Hi, I'm looking for beta testers for a resonance suppressor inspired by Soothe 3. I'm especially interested in finding people who use Linux.

Resonance Suppressors are used for cases such as snare ringing, harsh cymbals or vocals, whistling on distorted guitars, low-mid mud, finger squeaks on the fretboard, etc.

Requirements for beta testers:

• You knew what a resonance suppressor is before reading this post
• You know how to install a VST on your machine

All beta testers that give me any feedback whatsoever will get free lifetime access to the effect. I'm looking for max 20 people right now.

Comment below or send me a DM if you want to join.

The Pulsar II was a DSP card that ran Creamware's SCOPE platform on Windows: synths, effects and mixers, all running on the card's six SHARC DSPs. It has only ever had Windows drivers.

So I reverse engineered SCOPE 5.1 and wrote a Linux driver. Today, on Debian 13:

- the card is a normal ALSA/PipeWire device ("Pulsar2 Stereo") and works in Ardour through pipewire-jack

- a modular rack GUI ("Pulsar Scope") loads and wires DSP modules live

- 36 SCOPE effects, the factory mixers with meters, delays/reverbs, presets

- licensed Effect Package devices work with your own licence file

- MIDI from the PC drives a DSP synth

Not there yet: factory synths, ADAT, S/PDIF, the card's MIDI ports, 88.2/96 kHz.

It's a .deb (DKMS driver + service + GUI), GPL-2.0. You need your own SCOPE PCI 5.1 installer for the DSP files; none are shipped.

**Site, download and code: https://pulsar.faghy.it\*\*

Looking for testers with ADAT/S/PDIF plates or other SCOPE cards (how to report is on the site). Happy to answer questions about the reverse engineering.

Aulos is a music player for Linux, Windows and macOS. It's GPL-3.0 and uses egui on wgpu.

The UI is pure Rust egui drawn on the GPU, not Tauri or Electron, so there's no webview and no JavaScript. The same code is compiled to WebAssembly for the browser version.

What makes it different: - One app for three sources: your local library, MPD (as a remote control) and Subsonic/OpenSubsonic, all in the same UI. - A MilkDrop visualizer written in pure Rust. lactea runs MilkDrop 2 .milk presets and MilkDrop 3 .milk2 double presets on the GPU, with no projectM and no C++. On Linux it can also visualize MPD's output, captured through PipeWire. Curated presets: projectm-presets. - Bit-exact DSD: DSF/DFF files are sent as DoP to DACs that support it. Gapless, crossfade, ReplayGain, and a 10-band EQ with AutoEq profiles. - A tag editor in the style of Picard, with MusicBrainz and AcoustID lookups. It writes MP3, FLAC, Ogg, MP4, DSF, APE, WavPack and Musepack. - Runs in the browser: the same app compiled to WebAssembly, entirely on your machine: https://m0rf30.github.io/aulos/

Rust audio: decoding uses my forks of Symphonia (DSD, APE, WavPack hybrid, Musepack…) and cpal. The goal is to upstream these changes so the whole Rust audio ecosystem gets them, not just Aulos.

Repo: https://github.com/M0Rf30/aulos

I have a desk full of fancy hardware synths.

I have MIDI connectivity and MIDI to CV where needed.

I have no idea how to sequence and I am now jobless so there's no money out there to buy more gear, ergo I'd like to continue to work with what I have.

I have zero interest in DAWs. None. I don't want any of that. If I have to fight through DAW features to get what I want, so be it but they're not a benefit but a hindrance.

I have zero interest in software insturments. None. I don't need any of that.

I would like something a little more flexible and "modern" than Seq66, ideally something that can imitate the workflow of things like a Beatstep Pro, a Moog 960, Korg SQ-10, etc. Immediate. Visual. Physical.

Obviously I have to lose knobs and buttons for a screen and mouse, but I still would prefer that sort of flexibility over piano roll.

Is there anything out there?

Thank you for reading.

Howdy,

I got a wave:3 el gato mic recently and I'm trying to use it for my discord calls-- but it plays back the input through my headphones at all times.

i think it is called live monitoring but i really want to turn this feature off-- i have open-wave but it doesn't seem i am able to do it from there.

god help me, thanks

Meet Ressup EQ, a free equalizer plugin project built to bring advanced audio processing features to everyone without the premium price tag. NO REGISTRATION, NO TRIAL, NO LIMITS , 100% FULL, 100% FREE. A project in active development, constantly evolving with the ambition of delivering powerful tools inspired by high-end, premium EQ plugins.

Ressup EQ is still under development, with more improvements, refinements, and features to come. The goal is to bring increasingly powerful tools to a free plugin that can stand alongside paid alternatives.

You can processing L/R mid/side, RESSUP resonance processing, dynamic EQ, sidechain processing with dynamics or RESSUP resonance processor... This is my main eq in all my new project, i make it for me and for everybody who like this stuff

Available for MAC vst3 AU, WINDOWS vst3, LINUX clap

You can download at https://github.com/vallaproductionsoriginal-byte/Ressup-EQ

AI Epoque, everybody can think and forget knowledge limits. Welcome to the present.

Please avoid comments rage about AI sloop, i want only give people cannot buy Premium plugin, get a similar feeling for free.

Hey Linux audio community,

This is a difficult announcement to make, and I know this is probably the wrong time to release something like this.

With the current landscape and more tools getting sloppier everywhere, things are only going to get worse, so I decided to launch it today in a bit of a rush.

For the context, I am a computer engineer and a pianist, and I love making pixel-art in my free time. I’ve been working on this project for quite a long time, since I wanted to easily make music for my pixel-art game.

I know how deeply this community values open source, and I'm a huge fan of it too, since all my past projects were open source.

However, since this is currently my only form of income, I’ve decided (for now) to put the binaries here on https://rendevs.itch.io/robin-daw , as closed-source.

Please only buy it if you genuinely want to support me, since you might get it open source later on. Note also that the project has been tested, but there might still be bugs since this is a first release.

To be completely upfront about what it is: it's a minimal DAW focused on low latency.

It does not support VST plugins right now.

If you give it a spin, I'd genuinely appreciate your thoughts and feedback.

- ren

Linux only (x86-64) for now. Tested with the Hydrasynth Desktop firmware 2.2.0, which is not included: you need the firmware file from ASM's firmware pack.

GitHub

JellyBox v2.10 was released. For those who missed what is it - JellyBox is a native crossplatform music player for Navidrome/Jellyfin/Emby, works on desktops(including most linux distros, arm and x86), mobile and cars(carplay, android auto, android automotive OS)

This release added:

New Features

• Added mobile home-screen widgets.
• Added Chromecast as a playback target. iOS might be flaky, sometimes it needs few times to cast and stop until it works. Not sure whats the problem yet.
• Added relay. Using relay you can connect to your jellyfin server remotely without need to use tailscale, VPN or port forwarding. Connect in settings. Needs you to install Jellyfin plugin.
• View lyrics in full-screen Studio mode, with word-by-word highlighting when available.
• Added ratings for Navidrome songs, with a rating toggle in the bottom bar.
• Added a left side ruler for quickly navigating alphabetically sorted lists.
• Added support for custom ListenBrainz server addresses.
• Added a setting to clear cached images.
• Added a remote server address. This should be used for tailscale, VPNs or anything where your remote address differers from local.

Improvements

• Album pages have a refreshed design with animated cover art when available.
• Artists on album pages are now clickable.
• Albums on artist pages are sorted from newest to oldest and show their release year.
• Liked songs can be downloaded and, on Navidrome, sorted by when they were liked.
• Downloaded playlists and liked songs are now available in CarPlay and Android Auto. Queues can also be restored when the server is offline.
• Playback stays on the selected device when controlling another device, and reconnects more reliably after starting from a car or Bluetooth control.
• Switching back from AirPlay is clearer: the current device remains hidden until playback is switched back.
• Desktop window controls are now available throughout the app, including the login screen.
• Studio mode windows can now be dragged on Windows and Linux.
• Horizontal rows no longer scroll unexpectedly when using a mouse wheel.
• Home-page rows support pull-to-refresh(from left to right).
• Control colors better match the current cover art, with an option to disable this behavior.
• Playlist cover art is now centered.

Bug Fixes

• Improved stability on Android, in-car use, and session restoration across devices.
• Fixed artist results from Navidrome being shown outside the selected library.
• Fixed playback queue items not being replaced correctly when starting the app or switching devices.
• Fixed the Linux app name appearing incorrectly in some places.

https://github.com/avdept/JellyBoxPlayer

Some of you may have seen my earlier post about Sonara. I've now started providing release builds, starting with beta v0.1 today 😄

I've done a lot of cleanup and quality-of-life improvements, like:

• Improved UI, and made it customizable (though light theme is TODO)
• VST3 support
• .dawproject interop (Bitwig and I think some other DAWs too can export it)
• and much more I can't remember off the top of my head :)

It's available for x86/AMD64, it's runnable, but includes a installer script which adds a desktop launcher, .sonara file association and a sonara command.

Whether you install from itch app itself or via the archive, it can update itself as well.

I'll likely push updates quite often, so when updates to come, they can potentially make older projects need some migration if data/project formats change.

Download