Would love a new version, just like the new superjet with a reliable drivetrain.

ur pick out of the two

2026 seadoo rxtx 350hp or 2026 yamaha fx limited svho

Just picked this beaut up last night for a project over the winter. Previous owner stated the shaft seal was leaking. Ski has about 212 hours on it I plan on going through the entire thing, I’ve done a lot of research on the ultra 310 and have heard a lot of mixed feelings about them. I personally love kawi as a brand but would like to know other people’s experiences with this ski or maybe if there’s any shop owners out there who know this ski inside and out that could give a heads up on what to look for.

The engine on my 98 ts770 (single carb) makes less power and is blown up. I found a running engine at 125psi compression from a 96 ts770 (dual carb) that I want to swap into it. Is there any reason I can’t or any special things I need to do? The only difference is the carbs and I’m sure I’d have to run more fuel lines than stock but I’ll run mixed gas in it to bypass the oil lines. Lmk

Got spark and 120 compression but won’t fire any ideas what this little brass fitting is it has some pressure coming out when cranking

Hi all, I bought this yellow 701 superjet and don’t like the paint. I want to wrap it and do different mats. I was wondering if anyone has any tips to paint it all white or black so I can wrap it. I have never painted anything before so I’m unsure if this is out my range.

Does the gti 130 handle chop allright and is it any good for offshore?

And whats everyone reviews with this model?

Cheers

Hey guys, I need a rack. I was thinking of getting a Superrack but this thing is like $600. The other option is putting a crate with some strap on the back. I was also thinking of making one with PVC pipes, but not sure if I want to go through the hassle.

Any other options out there?

Thank you,

Has anyone else purchased off jet tech and it taken longer then their dispatch time? Sounds like they are a drop shipper? Although they say they have an AUS warehouse how does it take a week to even dispatch when the website is showing in stock and have haven’t purchased in a sale period. No response yet from email.

Hi all! Just rode my first standup today! 1993 superjet 650 (also got a 1994 modded 701 but have to build up to that). After riding I found that there was a few inches of water sitting at the bottom of the hull, I am just about certain it comes in from the fans on top of the hood. I feel like this is probably normal, but how do you get the water out while it’s still in the water? Also how much water is a problem? Is there a drain plug of sorts?

2005 Yamaha FX CRUISER HO; JF110DN 4-stroke Engine.

I checked the compression on my 4-stroke ski before putting it away for the winter.
I checked it "cold" and then again a few days later after idling on a flush hose for 15 minutes to run antifreeze into the engine.

The engine ran fine during the idle period, and sounded and ran "normal" for flush hose attached trailered ski. The plugs also all look essentially the same, not one is dry grey, or oil wet black.

On each test I got essentially the same results;
"Cold" engine (all in psi) 112/110/118/115
"Warm" engine; 112/110/112/112

The deviation between cylinders is minimal, but I'm curious if the numbers are low or tell me I should look at anything else?

Since I can't drain or suck every bit of fuel out I've always just turned OFF the fuel selector and ran the motor till it quit.

But now I also have a 4-stroke efi with no fuel shutoff. What do I do besides put some stabilizer in the tank?

Was putting my ski away for the winter and noticed some corrosion just below the hose on the water box. Does this mean the hose is leaking and the clamp isn't tight enough? I am thinking remove the hose, clean the corrosion with some sandpaper and reinstall. Does that sound right?

2023 VX Cruiser HO

I have 2 2002 seadoo gti’s and noticed what’s looks to be like a crack by the motor mount. Both have the same crack in the same spot, one being a little bit worse.

Is this something you guys would try to repair yourself or just take them into a professional?

I'm looking to purchase my first Jetski. I am not a typical Jet enthusiast as I have a lifetime worth of eperience but it has been owning/operating and skiing behind inboard ski boats. So feel free to talk to me like I am 8 when talking about the lil fishing boats. What I am wanting is something that I can use on small rivers, lakes and run out in the Gulf of Mexico to do some drops on gas rigs.

I figure that a good jet can take the place of a flat bottom aluminum, a bass boat and a small center console in these scenarios.

What models and manufacturers are there and which one would you get. Thanks in advance.

Hey all first time jet ski buyer here have experience riding but never owened one.

Im after somthing abit more touring like. Somthing I can go off shore with and do fishing etc.

Not fused if it's seadoo or Yamaha ideally somthing not with a supercharger as im after somthing reliability and less issues.

From what I can see is Yamaha seem more reliable on Facebook market place theres ones with 500 to 700 hours on them.

Anyway I dont really wanna spend more then 8k Australian

Found a gti 130 2019 with 100 hours on it but he wants 9k.

Also is it better to get older year model with less hours or newer model with more hours?

Also what should I check when when looking at one

Cheers

Hey everyone. I don’t know anything about jet skis but I’m moving to a waterfront property and want one. I can get this through a trade for essentially $6000. However, it will be a blind purchase without me seeing it. If anyone has any insight on if it’s a good deal and how risky it is (considering the high hours) I would love to hear it.

I've got a 2020 Yamaha Waverunner EX Deluxe with less than 50 hours on it. I'm located in Central Florida. I tried putting it on FB Marketplace but had way too many less than quality inquiries. Any ideas on a better way to sell it?

717 engine. Is there an adjustment I can make or something to look for that I can do to make the choke lever maintain its position while attempting to start the engine? The choke lever retracts immediately after letting go of it. I have to have someone hold the choke lever out while I attempt to start while applying throttle.

So I just bought my first stand up skis. I got a 1993 650 superjet (stock) and a 1994 701 superjet with these mods: big bore 701 based engine, not sure of the size. Dual carb, pipe, billet head.

Questions:
1) The previous owner ran 50:1 klotz oil with 93 octane in both skis. My question is, is this the optimal ratio and oil? I also am unsure which version of klotz I should use if I stick with klotz. Any help on this is very appreciated.

2) The 650 needs a battery. I wanted to get an AGM Duracell battery because it’s in stock near me. Assuming I find the correct size, is this a decent enough battery for this ski?

Any help would be greatly appreciated as these are my first two strokes. I got a gas can and a measuring cup for the oil. Just want to make sure I don’t fry my engine.

But 6 month wait to ride it

Season's over 🥲 The ski is winterized and parked on the trailer in the driveway till spring. Right now it's wearing a generic cover that only sort of fits, kind of like a borrowed jacket haha.
Is that fine for just sitting there, or is it worth getting one made for the model? Mostly worried about water pooling on top and the seat cracking.

My 2005 Yamaha FX1100 HO Cruiser is losing or leaking oil while sitting on the trailer.

Oil filter is normal and tight seal. Where should I check for a static leak? I do have acheap endosope, so I can "look" under things, but I really dont know where to look.

WHere should I look for leaking oill in the sump path.