I am getting unbelievable speeds in my I2Pd inbuilt torrent client. What is happening? How is it getting such high speeds, even on torrents which usually has a single seeder. Speed is higher than average. Why is this happening? I mean somebody with knowledge can tell me what is the difference between i2pd inbuilt torrent client that such speeds are happening for both upload and download? What does i2pd torrent client does differently that rest of the torrent clients are not able to do or can't match this speed? One more thing, I am hardly crossing 80 MB RAM usage and less than 5% HDD and CPU usage.

I made these one-page demo sites:
http://5tlfrq45xrtblsmtcchsv37hy5qjdifzxdxpt554fttg3mp7b54a.b32.i2p/video/
http://5tlfrq45xrtblsmtcchsv37hy5qjdifzxdxpt554fttg3mp7b54a.b32.i2p/manhwa/ (lossy AVIF)
http://5tlfrq45xrtblsmtcchsv37hy5qjdifzxdxpt554fttg3mp7b54a.b32.i2p/manhwa2/ (lossless and lossy JXL)

Can anyone give any feedback about the loading and quality? How does it work for you? What quality mode worked best for you?

Any suggestions so I can make improvements? Other than UI, I know it is bad; this is prototype UI.

If you are using Linux then, in tunnels config text file,

Step 1 :-

copy paste this in tunnels configuration,

[torrents]

type = torrents

torrentsdir = /var/lib/i2pd/torrents

keys = torrents-keys.dat

trackers = http://atia.i2p/announce,udp://opentracker.dg2.i2p:6969,udp://tracker.insulaocculta.i2p:6969,http://opentracker.skank.i2p/a

signaturetype = 7

dht = true

dhtfile = torrents.dht

web = true

rpcport = 7657

rpcpath = torrents

rpcaddress = 127.0.0.1

Step 2:-

And make sure that you have "You must copy contrib/torrrents/web to you data folder"  you can use any AI chatbot to tell you how to do it, if you don't know terminal commands for it.

If you're using WINDOWS then, 

Step 1 :-

copy paste this in tunnels configuration text file,

[torrents]

type = torrents

torrentsdir = G:/Movies 

keys = torrents-keys.dat

trackers = http://atia.i2p/announce,udp://opentracker.dg2.i2p:6969,udp://tracker.insulaocculta.i2p:6969,http://opentracker.skank.i2p/a

signaturetype = 7

dht = true

dhtfile = torrents.dht

web = true

rpcport = 7657

rpcpath = torrents

rpcaddress = 127.0.0.1

rpcauth = true

Rpcauth = true, is not optional but necessary. If this isn't present then torrents won't work. Windows 10.

when you'll start I2Pd then, on console page, click-on I2P tunnels section, and you'll see Torrent tunnel address and beside that click on "Web Panel" you'll be redirected to Torrent WebUI page. Or just enter http://127.0.0.1:7657/torrents/web/

I've zorin 18. I tried the official documentation page as well as the post given in the subreddit. But even after copy pasting the material the inbuilt I2Pd torrent client always throws error 404 not found. Any help would be appreciated.

Zorin 18, using I2Pd 3.0 noble.deb.

I kind of miss the old internet and did some browsing in Neocities but it still didn't feel right.

Many people say i2p feels a bit like the old internet but I just wanted to know if the eepsites were genuinely worth looking around or if they were just like idk boring "dark web", sensationalist, wannabe-hacker kind of stuff or more creative/geeky projects analogous to those of the early days.

[torrents]
type = torrents
torrentsdir = /var/lib/i2pd/torrents
keys = torrents-keys.dat
trackers = http://atia.i2p/announce,udp://opentracker.dg2.i2p:6969,udp://tracker.insulaocculta.i2p:6969,http://opentracker.skank.i2p/a
signaturetype = 7
dht = true
dhtfile = torrents.dht
web = true
rpcport = 7657
rpcpath = torrents
rpcaddress = 127.0.0.1
rpcauth = false

write this to /etc/i2pd/tunnels.conf

or appdata/roaming/i2pd/tunnels.conf for windows

restart your router then enter

127.0.0.1:7657/torrents/web/index.html

optional:

rpcauth = true
rpcuser = admin
rpcpass = secret

update your i2pd to version 3.0.0 and see it yourself :)

Windows installer and portable ZIP with I2P built in. No separate I2P setup or port forwarding. Linux terminal client and hub/server also available.

• Windows download
• Linux download
• GitHub: Client · Server

Start the client, give I2P a few minutes, then select File → Connect to I2P hub:
Or just press the star.

adc://mrjdpwyvlr23hoqpd3xbkgf4z7gdmwsbug7qm4fjkwd4dnsx4noq.b32.i2p

No registration or password.

Audio only test hub.

Edit:

The protable version work in Sandboxie and no need to share any files.

https://reddit.com/link/1x395tv/video/a85qpld8iuuh1/player

photo is 1.2 MB and it loaded in 5 sec (approx 250-350 kb/sec)

browser used: Firefox 157

http://eurabsp7voheencjnumtkmgyoyccuyagojjrvd64mlujoyxzxuoq.b32.i2p/

use this website to test it

I’ve been working on an iPhone app that embeds the C++ i2pd router. It has a built-in .i2p browser, the i2pd web console, router diagnostics, an address book, and a safe shutdown Live Activity timer in dynamic island.

The project targets iOS 17 and later. The source code and an unsigned IPA are available. To install the IPA, you’ll need to sign it with your own valid certificate.

This is a prototype. The background restriction bypass is experimental, and iOS may still suspend or terminate the router. I haven’t verified it on real iPhone but on simulator of iPhone 18 pro with ios 27 it works.

https://github.com/SoItsTime/I2PdiOS

Is there a VPS Hoster directly available in the i2p network for hosting eepsites?

Hi all,

Very interesting project.

Can someone tell me if the built-in torrent client can accidentally use the clearnet so it's better to have a kill switch in place if something breaks or does the built-in client only works over i2p?

Thanks

Due to circumstances beyond my control, my ability to communicate about release has been severely limited this quarter. However, work is progressing essentially on schedule, major changes are in, bugs are being fixed, and release will happen on October 20th as planned last month.

Thanks for your patience, Idk

Using 2.13.0-0-win(on win7), it reads jetty.xml on the same folder which i2p.exe exist.
//I installed program on custom folder.
//I copy back config on appdata\Local\i2peasy but it still don't use this folder.

and copy config/eepsite to upper folder still not work. It don't show red logs anymore but jetty still don't start. (because the flag icon on tunnels don't show)

If I have tunnels configured in both /var/lib/i2pd/ and in /etc/i2pd/ which takes precedent? They are different and there is overlap in only one entry - for port 4448. i2pd console does not show this many tunels though - can it be that both are getting read?

I2P is a Peer 2 peer network It needs people like you to work. If you dont enable port forwarding you cant properly contribute to I2P because users can’t connect to you directly. If you forward your ports I2P will become a faster and lower latency network.

If you can’t forward ports because youre behind CGNAT contact your internet provider and try to get IPv6. Even that alone would be a big contribution to I2P.

If that isnt possible too get a VPN that supports port forwarding (thats what i did)

sharing is caring.

I was in a workshop where we played with i2p and it seems the traditional way to use i2p is to run a router on localhost, and have your app use the router via the SAM protocol.

Running the router adds a lot of friction, especially on mobile. I realized that we can just connect to a remote, possibly shared router.

What are the trade-offs here? Can I simply share my router with friends?

I want to ask everyone, before touching i2p and other privacy projects or realizing changes to my own privacy issues, has my privacy already been leaked?

Hello, I've just discovered I2P and after using it a bit, I wanted to know if, like on Tor, there are wikis that list websites

My old post here https://www.reddit.com/r/i2p/comments/1pxv52a/instruction_how_to_create_secret_tunnel_inside/ was deleted by reddit as well as my other posts on Reddit and more important my own subreddit too. By the way I try to restore knowledge for all our community reposting from my logs. If something happens again with this post, feel free to post this instruction by yourself, I don't need glory or anything like this keeping this text under my name.

Here is the instruction how to create SECRET tunnel between computers, computer and phone, phone and phone.

I didn't find posts about this topic here. This instruction will explain how to create secret i2p tunnel between server(computer with Linux) and client(Android phone) for all people and for myself so I can access to it from anywhere in case I have new phone/laptop or purged all data on it for crossing the state borders.

Firstly, you need to have binaries on server from there github.com/PurpleI2P/i2pd-tools/ You can build them and save. And for sure you should have already installed i2pd on your computer and phone.

Let's start create a secret tunnel:

1. Now we generate file of secret tunnel for server(computer with Linux):

./keygen yourserver.dat 11

1. Copy this file to i2pd folder on server(computer with Linux):

sudo cp yourserver.dat /var/lib/i2pd/

1. Now we should find destination address for client(Android phone) config:

./keyinfo -b yourserver.dat (we should save address in the string which starts "b33 address:" for step 6)

1. Now we should find public and private keys for server and client configs:

./x25519 (save both strings, we will need them later in step 5 and 6)

1. Now we create config for server(computer with Linux) in tunnels.conf file located in /etc/i2pd/tunnels.conf

[anynameforserverconfig]

type = server

host = 127.0.0.1

port = 22 (for example we create a secret i2p tunnel for ssh service, so we chose port 22)

inport = 22666 (can be any number, just remember to use the same number in client config too)

inbound.length = 1 (1 for faster speed, for more anonymous traffic choose 2,3, etc)

outbound.length = 1 (1 for faster speed, for more anonymous traffic choose 2,3, etc)

inbound.quantity = 4

outbound.quantity = 4

inbound.backupQuantity = 2 (reduce traffic when inactive)

outbound.backupQuantity = 2 (reduce traffic when inactive)

i2cp.reduceOnIdle = true

keys = yourserver.dat

signaturetype = 11

i2cp.leaseSetType = 5

i2cp.leaseSetAuthType = 1

i2cp.leaseSetClient.dh.001 = anyname:publickey (insert here public key from step 4)

1. Now we create config for client(Android phone) in file which should be copied to /sdcard/i2pd/tunnels.conf on Android phone:

[anynameforclientconfig]

type = client

host = 127.0.0.1

port = 22666 (same number as in server config, so your ssh client should use port 22666 for connection)

inbound.length = 1 (1 for faster speed, for more anonymous traffic choose 2,3, etc)

outbound.length = 1 (1 for faster speed, for more anonymous traffic choose 2,3, etc)

inbound.quantity = 4

outbound.quantity = 4

inbound.backupQuantity = 2 (reduce traffic when inactive)

outbound.backupQuantity = 2 (reduce traffic when inactive)

i2cp.dontPublishLeaseSet = true

destination = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.b32.i2p (insert address saved from step 3)

keys = yourclient.dat

i2cp.leaseSetPrivKey = privatekey (insert here private key from step 4)

1. Now restart i2pd on server(computer with Linux), wait for 5-10 minutes, restart i2pd on client(Android phone). All should work now.

Signing the outer layer of an encrypted LeaseSet needs a key blinded from the destination's signing key for each day, which offlinekeys cannot produce. b33offlinekeys derives that material offline, once per day of the batch, and appends it to a normal offline-signed key file. The router gets a file it can publish with for the whole batch, and the destination's signing key never leaves the offline machine.

I’m curious if anyone here has ever tested a DC++ client and hub entirely over I2P.

I’ve started working on a fork of existing DC++ client and hub projects with the goal of making them I2P-only. The idea is to block normal clearnet connections completely and make setup as simple as possible.

Before I spend too much time on it, I’d like to know if anyone thinks this is actually useful or if there are technical reasons why DC++ is a poor fit for I2P.

EDIT

AirDC++ and Luadch are communicating over real I2P through SAM, with separate i2pd instances on each node. Hub connections work, chat works, search works, file lists work both ways, and real file transfers work in both directions.

I’ve also tested larger ISO transfers and verified the files with SHA-256 afterwards.

The Windows client is currently keeping its DC traffic on loopback and letting i2pd handle the actual external traffic. I’ve tested things like killing i2pd in the middle of a transfer and trying normal clearnet hub addresses, and so far the client has failed closed instead of falling back to normal TCP/UDP.

There’s still work left: a few more fail-closed tests, hostile/malformed peer data testing, GUI cleanup, packaging, and a proper security review of the I2P-specific changes.

The final goal is basically: install it, start it, connect to an I2P DC hub. No port forwarding, UPnP, SOCKS or manual I2P setup.

Estimated time to a decent public PoC on github: around 3 weeks.