After doing the Harley V8, I was inspired to do a Hayabusa car with a focus on acceleration and handling. The goal was to get under one minute on every short circuit, which I did!

I am in love with building custom cars arround existing engines, but often I just cant get the engines to be verry simmilar to the real one. I am currently working on the Volvo B5244T5 Engine and I found a lot of information abbout it.

It has:

81mm Bore

93.2mm Stroke

VVT All cams

8.5:1 Compression

260hp at 5500rpm

350nm torque at 2100rpm

The turbo is a little weird because my data there is for a porsche which apparently uses the same turbo.

My ishue is that the Torque is too much and too late and the power too little. What can I do? I have tried a lot allready but just trial and error and nothing planned. verry happy to recieve Advice for future builds also.

Jaguar Type 01 Replica

Whilst the Cunningham Motors company sold the standard Lumina model worldwide, a special version called the Lumina EXiV, was only sold in specific markets. Besides some styling differences, something else special about this version is that it only came in a two-door coupé body Style. It also had its own unique interior separate from the standard Lumina.

Bar the Turbo R and Aero trims, it also had a unique engine not available in the standard Lumina, this being the GR-44H, a 2.4L DOHC 16-Valve inline 4.

Some promotional images such as a poster and page from a magazine have been found of the Lumina EXiV Aero, which is what's shown here.

Only 5,203 Aeros were ever sold out of the planned 10,000, making the vehicle exceptionally rare.

I've been my first car for ages now and I'm doing some tests before releasing it to the public, it's supposed to be a mid/late sixties le mans supercar, but even with a wing, splitter, race suspension and THICC tires I can't avoid it from deciding to be a bird when making a turn over 20 km/h, yes i've ajusted the wings angle n'things but it still flies with the current settings, and if i try to alter them for more downforce the car gets 20 red warnings about kissing the floor on acceleration, please HELP

my first published build, all vanilla. I have the gearing set to it topping at 40 mph but I also tried to get as much out of it as possible in the last slide.

for every track car i make, at 100 mph i can’t get above 200 lbs of downforce. even with the diffuser and giant spoiler it doesn’t help the downforce. does anyone know how to fix this

Saw most of the NSX posts are either pretty shoddy (No offense) or just ripped assets from a game heres my attempt of the NSX thats MOSTLY Vanilla (used some mods for the headlights mostly)... I think I did a pretty good job, I LOVE this car Im 80% Done with this

So, the code I used is the same as every other car and it works on those. The fixture number in the code is correct, and I moved all mirror fixtures to the end. The steering doesn't work, but this is also an issue with the reverse gear, and the rpm gauge. Can someone help me fix this?

Ronda HDX — Because apparently, 847 hp wasn't enough.

Alright, lads. Meet the Ronda HDX, a prototype from my brand, Ronda, and a preview of what the final car might become.

I may or may not have lost my mind while building this thing in Automation.

The specs? Absolutely criminal.

• Top speed: 440 km/h (273.4 mph)
• 0–100 km/h: 2.5 seconds
• 100–0 km/h: 24.5 metres (80.4 ft)
• Engine: Black Matter — 4,068 cc naturally aspirated inline-3
• Power: 847.2 hp
• Transmission: 7-speed sequential
• Drivetrain: AWD, 50:50 torque split
• Differentials: E-LSD

And now, the best part: the Black Matter. A 4.1-litre naturally aspirated three-cylinder making 847.2 hp. No turbos, no supercharger, just three cylinders having the worst day of their lives.

Is it sensible? Absolutely not. Is it probably a war crime against engine design? Perhaps.

The HDX is still a prototype, so the final production version might change. For now, though, Ronda seems to have a slight problem with the concept of moderation.

So, Reddit: have I cooked, or should I be legally prohibited from opening Automation ever again?

how do I edit interiors I can’t figure it out. also how do I make convertible tops go down so I can see what it looks like properly

based on the land rover disco
this was pretty fun to make

Heya you people! Just wanted to show off my BMW Neue Klasse ish thing I came up with, tried to make a CSL hommage build with the front end design of the 2002 Hommage mixed with modern neue klasse bits

I've been making my first car in automation for some time now, it's a 1960's le mans prototype but i genuinely can't invent a good name for it without it sounding like "Stingerfarten 3972 RPG87", so now i want to know how YOU personally decide your car model names

1979-1987 Cherrier Elsa B4 VTi Hatchback

I'm new to automation so Im still learning all this factory production stuff and so far I've built 2 trucks. The engine for the second truck is in the picture (see above) and the engine for the first truck is already being produced so I'm trying to figure out why this is happening.

Tl;dr I need help adding a second engine to production and idk if I can have 2 engines produced in the same factory