So after many years I’ve finally got my krytac where I’m finally happy

Hi, has anyone had any experience with the Wiley X Saber eye pro? Currently using some Bolle safety trackers which regardless of the weather fog up within about 15 mins even with using anti fog spray on them.

So I've got my third game tomorrow. So I've only ever played on Sunday dry days, I'm not worried about rain or it being chilly but Just wondering if the weather tomorrow will effect either the turn out or the game at all like BB's being wildly inaccurate. Never played in these conditions so just wondering what to expect or even if it's worth going (more than likely still going to go)

Any advice?

What do you think of my final gear? Any suggestions or feedback?

New video out on my channel. I hope you guys enjoy it :)

Long one short, I have ended up with 3 body variants of MP5s all stock internals and all secondhand so are a bit lack luster on but fire rate and power

Does anyone have any suggestions on upgraded internals or set I can look into for upgrade the three beauties

Hello!

I have a Specna Arms SA-P27 PRIME Daniel Defense RIII and I overtightened the barrel nut then damaged it trying to loosen it again - I didn't have the right tool. It's so badly damaged the handguard won't slide over it anymore.

Where can I source a new barrel nut? I'm struggling to find anything definitive by searching online for my specific rif.

Thank you!

One thing ive been curious after getting my Dan wesson 4” is if i can potentially swap out the barrel for a longer one instead of just buying a new revolver all together?

Quick bit of background: I run a small project that scrapes prices every day from a bunch of UK airsoft retailers (Patrolbase, Defcon, Bespoke, Land Warrior, SkirmShop, Airsoft Direct, BZ Tactical and others). Every replica builds up a price history over time.

A few things I've noticed so far:

- Real price cuts are rarer than you'd think. Over the last 45 days, only 23 in-stock replicas over £80 had a genuine drop (10%+ below their usual price) across the 7 shops I checked.

- Lots of "reduced" prices just match what other shops already charge.

- The same gun can be £100+ apart between UK shops. Right now the EMG/Cyma MK16 GBBR is £449.99 at one shop and £559.99 at another.

With Black Friday coming (27 Nov), I'm planning to check every sale against the price history and post which ones are real and which are just normal prices with a red sticker.

Two questions:

1. Would this be useful to you, or is it overkill?

2. What are you waiting to buy? Drop the exact model in the comments (e.g. "Krytac Vector", "TM MWS", "SSG10 A1") and I'll track it specifically. Then I'll report back here during Black Friday week with its real price history and the cheapest UK shop.

Guns, pistols, HPA, gear: whatever you're eyeing. Not selling anything, just trying to see if this is worth doing properly.

Looking to add some other rifles to it, want a gbb SMG but not sure what to get

I bought a double bell TTI M4 059M+ for my dad to get into airsoft.

Ever since I got it, it’s been so weak, sitting at around 0.76j consistently.

I’m no expert when it comes to upgrading or maintaining airsoft guns but I wanted to have a look at the internals to see if there was anything obvious.

I’ve attached some pictures of the parts like the bucking and inner barrel. Maybe there’s something I’m missing?

Any help would be much appreciated.

Thank you!

Hey got a tac 41 bought it on a whim off a tech, can’t seem to get it to be very accurate after roughly 25m. Is that just airsoft or is there something I can do, cleaned the barrel before I tried to sort hop up and zero it. Just wasn’t very consistent a bit all over the place no matter what I tried. Couldn’t hit a bucket 40m away even though it was set up flat, clamped couldn’t move it. It chronos right in the U.K. joule limit with a 0.48g bb.
Will put some upgrades in here for reference in case that changes something;
kraken TDC hop camber & GBB cylinder head
GBB flamingo hop rubber
Chub nub V2
Morpheus duel bore GBB barrel
Scorpion piston & spring guide
Rapex 2+ easy pull spring
Orange front guide ring
Fluted outer barrel 330mm
Carbon fibre suppressor

*also posted in r/airsoft

Tokyo Marui 5.1 Hi-Capa, Modify Trinity Hi- Capa or Tokyo Marui SIG Sauer P226?

This is my second handed G&P M4 Navy Seals, it just came and it's too loose in this part of the stock and it seems like I have to tighten it but I can't disassemble it since I tried to take off the back side of the stock and there is a bolt, one redditor said that I should be able to screw it off but it's too strong even with pliers and I don't really know if there's a special tool for this or what am I doing wrong and I want to fix it. I would be extremely happy and thankful if someone has the patience and knowledge about this to guide me cause I didn't find a manual nor a video about this model and the stock especially. I will give more pictures in the comments if someone wants to see more

Hi all,
Is anyone running cyma platinum gen2 mp5? How is it? Show some pictures of your setups, attachments. I’ve Seen that they have changed their mosfet so it doesn’t fail. Looking to get one for indoor CQB. Unsure which model should I go for:
CM041, CM041H, CM041J or go for CM041L and get extended barrel with suppressor or tracer.

First AEG has arrived, and I think I’m officially hooked!

Received my first AEG yesterday and honestly, I can already see how easily people get sucked into this hobby! There’s something about finally getting your first RIF in your hands that makes all the research, planning and choosing gear worth it.

I’ve got three magazines ready to go, and a laser/light combo should be arriving by the end of the week to finish off the setup for now. Of course, I’m already starting to think about what else I can add to the loadout! 😂

I’m really looking forward to getting it out onto the field for the first time and actually putting it to use rather than just admiring it at home. Now I just need to get myself booked in for a game and start getting some experience under my belt!

For anyone else who remembers getting their first AEG, did you get this excited, or is this just the beginning of a very expensive hobby? 😂

Looking for some options for CQB near Leeds, I've done the kill house for a few years but fancy a change.. missing the foundry !

Kings Arms FN FAL AEG
Will eventually be swapping out/re colouring the two tone
Rest of gear otw

Morning all

I am after some advice on what face and cheek protection to get. I am a complete beginner so do not want to get the wrong equipment that could do more harm than good.

I will be using a pair of Nuprol Battle visor RX. I know some people aren’t a fan of these ,but as a beginner, I need to keep an eye on the budget.

I know the eye protection is a touch on the larger side, so I am looking for face and cheek protection that won’t interfere with them and cause them to lift. Any recommendations would be great.

Cheers