I miss these kind of shows. Everyone had there own taste on how they modifide there cars. Social media was not a thing back then so this was a way to showing off your build. I know there not all stance cars but I dont know where else to post 😅👍 hope you like it. I was around 16 when I took these pictures with my digital camera.

purchased a car with bc coils they are seized together like hell i’ve tried for 2 days now with pb blaster and soaking in vinegar any other suggestions before i just buy new ones?

My VW Polo at CamberToHell

What coilovers yall running to tuck front and rear? The ass ends sit up so much higher than the front on these and i just wanna make the right purchase.

I’m looking on the more budget end of the spectrum (I had godspeed on my genni coupe) how low can they really go?

Installed Megan Racing camber/toe arms in the rear. Running about -6 in the back, and -3 in the fronts. Planning on getting Swift springs soon, plus some extended LCAs in the front. 2016 Mitsubishi Lancer ES

how bad if at all is natural camber? just wondering as i lowered my car and now have slight camber

Anyone know what the torque is for the adjustable locking nuts on Megan Racing rear camber/toe arms? Just hand tight as possible? I can’t seem to find any specs anywhere online, just torque specs for the mounting bolts for my car. I took it to a shop the other day but they wouldn’t adjust the toe arms, only the eccentric bolt. So I’ll have to go to a special alignment place probably to keep the camber the same.

Has anybody used this brand before? I wanted to run 215/35/20 on a 9inch width and 235/35/20 on a 10inch width. I wanted to get enough stretch, but how is the quality? Falken only goes to 225/35/20.

Im planning to run stretch tires next year when I got airbags. I got a 20x9 in the front and 20x10.

Could you guys show me what it look like / how much lip will show if I run these measurements:

Front: 215/35/20
Rear: 235/35/20

first time building a stance car, it has 15x9 -20 195/45/r15

i have the rear sitting perfectly, had to cut into the adjustable camber arms for both the front and rear and also had to relocate the shocks in all four corners. i still can’t find anything online on how to add more in the front, any help would be great.

i know i need at least extended lower arms but i can’t find anywhere online to buy them or any way to custom make them

R33 GT-R, Sacramento CA

Evening carmeet with only japanese cars located in Bruges Belgium

I just don't have the time to lower the car all as I wanted but definitely is going the right way. 🤙