Was on IG this morning and was like, “Hey, that’s not a Zion.” So took a few screenshots to share.

Only recently got back into firearms about two months ago after only owning a Pt-92, Mossberg 500, FAL and M&P FPC, bought this one a month ago now and had it sitting on the back burner due to work and more work, was finally able to bring it out this week and learned about building guns, whole new rabbit hole for me, so I decided to pick 3 things up for it, this is where it’s at right now but I plan to add more next week, just need some time to think what else, but I’m genuinely happy where it is right now and hope y’all like it too

Is the Uzi Pro still being imported to the US?

If not, are they going to again someday?
If yes, are the numbers ever going to ramp back up?

Does anyone know if IWI is still making the SAR in 300 BLK? I have a Tavor-7 and a TS-12, I would be very interested in the SAR in 300 BLK. I wanted to check before calling my FFL and have them search for it.

I bought this 10 years ago for $1000 bucks i was told it was never shot and i have never shot it besides the shell from the factory .

I did a little chat gbt and it seems to think its worth something in the $3200-4200 range

I found one on gun broker for $3000 but it wasn't a iwi from my limited research, apparently made in Israel is a game changer

Box gun and paperwork all has matching serial numbers 352 is the first 3#s

Definitely dont think its a 3k+ gun and have considered shooting the piss out of it but hoping to gain more info and if theres an actual market for these

I’ve had a Masada Slim as a carry pistol for years now and never had an issue with it.
Ordered the threaded barrel a few months ago and fired yesterday for the time with the threaded one installed.
Slide wouldn’t go into battery after successive shots, sometimes wouldn’t even close when racking the slide. It looks like the bullet is feeding into the chamber at a weird angle and the slide is closing onto the casing. Failure to feed, not a failure to eject. Same factory magazines as always, same slide, guide rod/springs &etc… only the barrel has been replaced (with another IWI barrel).
When I was shooting with my suppressor on, I had no issues, and I’m wondering if maybe my barrel is a defect or has too much tilt? Maybe the weight of the suppressor on the barrel keeps the tilt at the level it needs to be?

Has anyone else had this issue on the Mas9S?

My x95 for attention

First time shooting with my new Strike Industries Micro Threaded Comp today. I love this little gun so much, I want to buy a 2nd one but keep it more bare bones as a back-up.

I'll probably upgrade/replace the light with a Streamlight TLR-7 and replace the optic with a Holosun EPS carry (2 MOA gold dot) in the near future. But when I first started building up this pistol, I took accessories from other guns that I already owned rather than dumping a bunch of cash into it all at once. But the more I shoot it, the more I like it. It's my favorite 9mm pistol out of the 9 pistols I own. The Mischief Machine grip module is so nice, fits my hand perfectly, really helps with felt recoil. Already pretty flat shooting without the compensator, but now a little better. Also sometimes throw a Spectre 9 suppressor on it for some fun.

ZERO malfunctions in 2,000 rounds so far, with all kinds of ammo.

Shooting from 7 yards at an indoor range. Couple of loose shots in there, but I was double-tapping to see how I liked the new compensator, and these were my first 2 mags with the new compensator.

I’ve been wanting to pick up an 8.3” Galil ACE Gen 2 in 5.45×39mm for a while now. I’ve always liked the AKS-74U (Krinkov), and the Galil seemed like a great modernized alternative.

I actually managed to place an order through an online retailer recently, but they ended up canceling it because they couldn’t fulfill the order. Since then, I’ve looked pretty much everywhere online, and they all seem to be out of stock. I was really eying this gun for months, but I didn't want to do an impulse buy...

I was hoping to get one before the November 1st deadline for IWI’s free suppressor rebate promotion.

Does anyone know if IWI is still producing the 8.3” 5.45×39 variant? More importantly, has anyone heard anything about upcoming restocks, particularly before November 1st?

People think I’m weird when I say I like this better than an AR-15. I’m not much of an AR guy and love my Israeli firearms

There is someone near me offering a good deal on a new in box, unfired X95.

My only concern is if I need warranty work, will it be granted or is it “buyers risk” at that point?

Thanks for any insight.

Looking for best attachments such as a vertical hand grip and the best thermal scope to use. Planning on setting it up for coyote hunting.

Both in 5.56x45 and suppressed, which one is better and why? And for real worl/ go to use for these firearms.

Are for sale posts allowed here?

I have a polymer masada that is great but I prefer metal frames and am in the market for a Jericho (specifically F9)

Everywhere seems to be out of stock. Are there any reputable outlets that have it in stock?

anyone else doing the supressor rebate? submitted mine, and havent heard anything back. bought 2 of the qualifying guns, anyone think i can do it twice?

For now.
It's quiet, accurate and has very little recoil. It's also pretty heavy.

-Gen 1 Galil 7.62×39 13 inch pistol
-CAT ODB 718 Inconel suppressor on Spooky 2 Muzzle Brake
-SWaller89 suppressor cover
-KNS Adjustable Gas Piston
-ALG 2 Stage Trigger
-A3 folding Skelestock with JMK customs walnut cheek riser and butt pad on A3 1913 rear rail adapter.
-KNS plastic delete with JMK custom walnut AR 15 CCQ grip
-RS regulate M lock hand guard with JMK walnut panels and handstop
-Aisin Gioro Retro Dark Weave sling
-Holosun ARO EVO SPR Green Dot with 3x Magnifier
-Arisaka 300 series light with SureFire rail mounted pressure switch
-Bulgarian Polymer Plum Magazines

I am looking for honest opinions on the ts12 I own a couple x95s and was wondering what people thought about the ts12? I seen them online and wanted an honest opinion on them

I haven’t taken this out yet. Kinda just putting spare things together. However, is this gonna cause issues with eating the brass or what?
It feels decent but the mounts are cheap. Just wanted to see how things feel and work before sinking some money into a decent mount.

Tried to time shots in between this guy shooting his hux 762 To… shot Hornady white tail 150gr and Federal Premium 165 or 168 grain and honestly Galil is yes heavy but way manageable, Tisha added no weight and sounded amazing. definitely more back pressure than Tisha 556 (obviously on a 5.56), Rhodie 6 is still better on 5.56. When I get my IWS7 HOPEFULLY next week. I’ll test it on the Galil

I placed an order months ago for a Tavor 7 that was on sale. Then, without fail, something happened in my life that forced me to cancel the order. Fast forward to today, I came across one, marked used, for significantly less.. and as far as I can tell apart from the best up box, this thing is close to new. Trigger pack is clean and un-marred. Bolt and carrier look like maybe a mag went through this rifle, but otherwise untouched. No sign of anything being mounted on either rail. I'm pretty excited about it.

Only thing is it fits not have the factory muzzle device? Is this for a can?