​

Hey everyone, looking for some advice because I'm honestly not very handy and have pretty much zero experience with painting or home repairs.

I have a peachy/salmon orange wall in my living room, with a matte finish and a bit of texture. There was a tiny black mark just below a picture frame, so I tried cleaning it with a microfiber cloth and deionized water. I thought that would be pretty harmless, but afterwards a thin dark vertical streak appeared underneath the frame, almost like a little water run.

The wall was dry before I cleaned it and it's been about 24 hours now. The streak is still visible and doesn't seem to have changed much. I've taken the picture off the wall to let it dry, and I'm leaving it alone for now because I don't want to make things worse.

I genuinely had no idea that just wiping a wall with water could leave a mark like this. I don't even know what type of paint was used or whether it's washable, so I'm not sure what I'm dealing with here.

Would you just wait a few more days and see what happens, or could the finish itself have been affected? If it needs fixing, is this something a complete beginner could realistically do, or would it be better to hire a painter?

I'm also worried about matching the peachy orange colour and the textured matte finish. Would touching up just that small area leave an obvious patch? I'd rather avoid repainting the whole wall if possible.

Putting the picture back to cover it is an option, but I'd prefer that as a last resort.

I've attached a photo of the room and some close-ups of the streak. Any advice would be appreciated. Thanks!

We’ve owned our home for a little over ten years. We really love it and it’s well-constructed, so there’s rarely any big issues but the previous owners were architects who put it in a lot of custom stuff and in the rare instance where we have an issue, it’s often more expensive than it probably should be. We’ve definitely made a few bad calls on how to go about home repairs but now we feel stuck and want to know our options. I’m leaving out some details that have been just frustrating rather than concerning but I’ll just say I’d prefer to never see this man again in my life.
We had a mold issue in our top floor a few years ago, got it tested and went with the remediation company the tester suggested. It seems the seals on the windows in our bedroom and guest bedroom each had issues, but the windows themselves were fine. The guy who did the work seemed competent for the most part and told us we’ll probably need to replace one of the windows in a few years and we could call him to get that done. Let’s call him RP.
After a couple years, we call RP to do that. It’s a custom bay window and we wanted to just replace it with the same style. It takes almost three months to get the window (when he had said 6-8 weeks) during which time water seeps in under the window. Then it becomes like a 3 day process for installing it, followed by him replacing the wall under the window where water had gotten in which he had replaced two years prior. Then he couldn’t salvage the stone window stool so we had to get that replaced and then he had to come back to finish up framing that. All in all replacing this window took around 5 months. And then a month later, the recent nor’easter hit and at its peak, water started dripping from the top of the sill of the brand new window (which is a whole new problem we never had). We didn’t want to deal with the guy again so we called a reputable window contractor who (thankfully) said it’s probably just a caulking situation but that they would have to charge like 1k and not give any warranty because they didn’t install it and liability and whatever.
So now we’ve had to go back to RP, who keeps telling me he’s gonna fix it imminently but then doesn’t actually show up. Meanwhile he told me the warranty for the whole window is in his name so if I ever have issues with it, I have to keep using him. I just want this to be over but it seems like that’s not an option. Can the warranty be transferred? How worried should I be about water getting trapped in the window (it’s been raining pretty often this fall, but no more leaks)? If this bullshit continues can I sue him for faulty installation?

I started shopping for a solid wood bed frame and somehow ended up falling down a rabbit hole about joinery and construction lol.

At first, I thought solid wood was all I needed to look for, but now I’m wondering about things like how the side rails connect, center support, and whether bolted joints tend to loosen over time.

I’ve come across quite a few people saying their beds started squeaking or wobbling after a year or two, and I really don’t want to buy something that looks great but becomes a hassle to live with.

For those of you who’ve owned a solid wood bed frame for several years, what’s held up well and what hasn’t? Is good wood joinery really worth prioritizing, or can a bed with bolted connections be just as sturdy in the long run?

we just got rid of the tub and i keep waiting for the shower to be way more work to keep clean, but so far it feels about the same or maybe even easier.

is that normal or am i just early into it and going to regret this in six months? curious what actual day to day upkeep looks like for people who've had one a while.

Hi all, I recently bought an Andersen 4000 to install on my house. I have hardie siding and trim around the doors and am afraid to install the new storm door. Any tips on drilling/screwing into it successfully?

Background
The old storm door was very difficult to remove—many screws were overtightened, while others were stripped. When the contractor installed the old door on the new trim, they seem to have hastened the decay of the old one because every single screw into the side of the hardie plank was stripped, leaving my door to hang off its hinges. When the door finally came off, huge chunks of hardie plank fell off where those screws had been.

The contractor has agreed to replace the hardie plank when they come for another project. But i’m afraid the new door will end up in the same situation. I have two other storm doors I need to replace and I’m about to rip them off too to see what happens. Part of me wonders if wood would be a better option.

Hi,

Interested in recommendations for power tool set recommendations for newish homeowner interested in DIY.

Honestly, not even in advanced projects but to start, tools to hang mirrors and pictures on plaster walls. I've had trouble getting the hang of trying to drill through my 1920 walls.

Any YouTube channel recs for beginners?

Thanks

USA. Racoons tore into dorma window siding. Contractor was supposed to 'replace to original'

A few issues besides a terrible job which they are supposed to fix tomorrow

1. The siding does not look original. There will be 1 inch of black metal flashing showing on the lower border as well as the vertical/diagonal border

Also, instead of 3 inch cedar it's 4 inch hardie plank siding. The contractor did tell me it would be hardie plank but did not mention it would be 4 inches (when he showed up he said they couldn't find 3 inch so it had to be 4 inch)

1. The insurance agent would only accept this bid because it was a third of the price of the other 3 bids. The contractor said his bid was lower than the others because it was hardie plank siding and not cedar siding, which okay, but neither he nor the insurance agent explained that using hardie plank siding meant it would be impossible to look like the original. It was only said to be a different material, nothing about 1 inch of black metal flashing showing + 4 inch vs 3 inch original siding width

My question is does a switch from cedar to hardie plank affect the value of a 1920s Victorian house? Is there any negative effect of choosing this material?

Was giving my bathtub a once over today and noticed this hairline crack that’s about an inch long. Is this something that can be patched? I checked the basement under the tub and I don’t see any leaks. I also used a moisture meter I have on the wood under the tub and it was coming up dry. Any feedback would be greatly appreciated.

https://imgur.com/a/7sbOUYF

I bought this house almost 5 years ago. The previous owners had a security system. I have not subscribed to one. Looking at doing some changes in the house and the motion detector is in the way. Been reading online that I need to completely power off the system, unplug the backup battery then I can safely remove the motion detector.

The backup battery is locked, previous homeowners never left a key or anything. Called the company, cox home life, and they basically said since I'm not a subscriber they can't do anything for me. And even if I was a subscriber, they don't know that they can just open up the backup battery lol.

So I am thinking of just ripping the motion detector out and cutting the wires, but I don't want to get myself hurt or damage the electrical stuff in the house.

Does anyone have any experience ripping these things out or have any guidance they could provide?

What lights are you installing in your showers? I have a steam shower that I am remodeling and I’m looking for a light to install in the ceiling. There are too few “steam shower” lights with near non-existent reviews. I’m thinking about installing a Custom Electric (Model # 53828101) canless wet rated light in the steam shower and adding 100% silicone or kerdi-fix to the seams where the light touches the ceiling tile. I’m using the schluter waterproofing system and maybe the kerdi-fix will be enough. Anyone run into a similar situation?

I live in an area of Southern California that is prone to outages every year during red flag days. This latest out power has been out for over 24 hours and we're expected to not have it restored for another day. I'm looking for recommendations for a backup system. We have solar already but no backup (I was cheap when i got the solar system 5 years ago and am kicking myself). Any recommendations more than welcome.

Hi everyone! Looking for some help.

This is my first time sealing stone and I wasn’t really sure if I was doing it right. Well, I definitely didn’t do it right because it’s so streaky.

These are the steps I took to apply the sealer:
- cleaned the surface with solution of water and a little bit of Dawn dish soap, then let dry for at least 24 hours
- poured Miracle Sealant 511 Impregnator on the table and spread sealer with an applicator pad
- waited a few minutes then wiped away excess

I came back a few days later to see these streak marks on my dining table 🫠 I think I might’ve screwed up the last step I listed above because I wasn’t sure how “wet” the surface was supposed to be, so I kept wiping until it was dry-ish (sorry I know that’s not super helpful but that’s the best way I can put it).

I did a quick research and it seems like Miracle Sealant has another product (Residue Remover) that I can use to try to get rid of the streaks. I didn’t see a whole bunch of reviews online though so I’m a little hesitant. Looking for some tips on how I can get rid of the streaks safely without ruining my dining table. Thanks in advance!

Photo of dining table/streaky sealer here: https://imgur.com/a/OYBGVwT

I am looking for how to best use the floor plan (without breaking any walls). I love Julie Jones style but too expensive and not available for a few weeks. Any alternatives that you follow/can recommend, I am working with an odd layout and getting overwhelmed . thank you!

For a while I kept having an issue with water backing up into my basement.

I went through everything, thinking it was clogged pipes, drain field issues, over saturation from the rain, etc etc.

I saw that my effluent filter was clogged very often, and then completely popping out of the baffle.

My found out that my effluent filter had a "gas deflector" and upon removing that part of it, it never clogged again.

If you look at this photo, it is the slotted gray piece at the bottom: https://m.media-amazon.com/images/I/512eXUwKi4L._AC_SL1208_.jpg

That is actually not needed and caused major clogs for me. They sell the filter without the gas deflector.

Anyways, if you ever come across an issue like mine, try that out. Hope it helps anyone out there!

Hi everyone,
I am having a frustrating issue with my Harbor Breeze Avian ceiling fan and the FAN-53T handheld remote.
Up until today, it worked fine. Then, the light suddenly stopped responding to the remote. When I press the light button, the red LED on the remote lights up, but the actual fan light won't turn on or off.
I tried doing a rapid power cycle using the manual wall switch to clear it. Instead of resetting, the fan motor immediately jumped from Low straight to High speed. Now, the entire unit is completely frozen on High. It refuses to change speeds or turn off when I press any of the buttons on the remote.
I’ve had a similar lockup happen in the past. Back then, we fixed it by leaving the remote in a drawer and just using the wall switch for a few months, which eventually forced a reset. But right now, it is October and freezing cold—I can't leave a fan blasting on High, and I don't want to wait months for a passive drain.
Here is the catch: I cannot flip the main circuit breaker to the room to force an immediate hard reset because I run sensitive home networking equipment in here that I absolutely cannot take offline right now. Dropping the canopy to mess with the wiring is also a bit too complicated for my current situation.
Has anyone dealing with this specific Harbor Breeze Avian model found a trick to force the internal receiver module to factory reset or clear its microprocessor freeze immediately without cutting power to the rest of the room's electrical outlets?
Thanks in advance for any advice!

Hello Reddit community. I come looking for your best recommendations in terms of window film. The building that I work in is mostly windows and during the evening the sun comes in blinding all the staff at the register. What I’ve been tasked with finding is: a window film that will block as most of the sunlight blinding us as possible while also keeping visibility both ways as clear as we can. Most I’ve come across are privacy film but I’m pretty sure the big boss wouldn’t like people to not be able to see into our business. If anyone has best recommendations please let me know. If I should post this in a different sub my apologies.

Anyone know how to get black spray paint off of this tan brick? Pressure washer comes to mind but can’t run that in my living room.

Is there a paint or stain to make it look like natural red brick? Hate the idea of painting it white

https://imgur.com/a/ZMwuyrN

My neighbor wants to cut all 3 of these down. He would be doing it himself (so cost me nothing).

I am for sure on board with the one on the left.. but I am having 2nd thoughts about the 2 (Norway Maples?) on the right….

I get attached to trees and hate to cut down healthy ones… and they shade the west sun (I just have an AC unit that works pretty good) I worry that my yard would feel so naked afterwards!!!

It would be nice to have more sun, and maybe a garden, but would it be too much sun? 🤔I don’t get much sun in my backyard at all right now - can’t really grow anything back there….

Would it increase or decrease my property value?

New time home owner and professional over thinker so any advice helps!!!

Welp apparently I can’t post photos?!! 😭 for reference, they are on my side of the fence, and like 3 ft away from the fence but not that large (yet) like a foot around probably and

1st Primed with mad dog dura-prime. Only happening on the Sunny side of the house. Should I reprime then paint again? ..

https://imgur.com/a/ZeXUUAO

Getting foundation vents installed. Any recommendations for automatic vents that work on bi coil metal. I don’t want to have to worry about opening or closing them seasonally so I assume automatic is the best choice? The guy that’s installing them recommended the Witten 306mlb automatic foundation vents 8 by 16. Lowe’s stopped carrying them and I bought them off Amazon and they sent a completely different brand. Sent for a replacement but might return it all I’m not an Amazon fan at all. Any recommendations or links. If you recommend manual and advise against automatic foundation vents please let me know why. I don’t want anything too fancy just standard and will not be hooking the electric ones up.

Moved into a deceased family member's home, their furniture was of course still here and the couch was in a room that it seemed to not be possible to move it out of normally. (yes of course if they got it in then it can get out, we could not find it and further my family is telling me it was nearly impossible to get in there 40 years ago anyway).

So my uncle decided to just chainsaw the thing in half and we got it out in pieces. Its not nightmarish or anything since we got it up largely with a vacuum but there are still spots with metal flecks. Is there a magnet tool I can rent at Home Depot or something that can easily pull these out?

Be careful! I called Angie's list through my contractor company around March 2026 when the recession started getting bad to get extra work. The person who answered the phone said they would have their salesperson call me. That person called me and told me a quote after talking over all their packages. I told him I would get back to him I just needed to go over the price with my business partner. He immediately started asking, "I thought you were the boss? Why aren't you making decisions? Is this too much money for you that you have to talk to someone else? I can't hold the price once I get off the phone call." I was stunned silent because in 10 yrs of business, I've never been talked to like that.

I told him something about his professionalism being shocking and that I'd be looking elsewhere.

A few days later the original person who answered the call reached out to follow up, and I let him know how unprofessional the salesperson was. He apologized for him and then continued to try and get my service. UGH.

Since then, the company has been getting non-stop telemarketing calls EVERY SINGLE DAY. 2 to 3 a day. It's been MONTHS since I spoke with him. I'm sure he sold our info to some lead company data bases because of that interaction.

I’m currently in the middle of a big basement remodel with a 120k budget. We’re adding two bedrooms and a bathroom to a previously (poorly) finished basement. We hired a local reputable GC after getting several quotes, and so far the project has been going okay, but there have been several issues particularly with hvac and plumbing which have required multiple redos of work done. None of the sub contractors seem to be coordinating with each other and placement of things like ducts and pipes seem to be figured out in the moment without any forethought.

One point of contention as been soffits, which I understand is often necessary in a basement. However, I seem to be the only person concerned about minimizing them. Two weeks ago I came home to ducting running right across a hallway creating a head injury hazard. I’ve made this known to the GC on multiple occasions and am told that they are working with the HVAC company to fix it.

Yesterday I came home to a second air handler for the downstairs with a vent running chest height across the doorway into the garage. The GC told my wife this morning that there’s not really another option.

I feel like a crazy person. Who does something like this and says to themselves “This looks good.” Am I being unrealistic? Is this what working with a GC is normally like?

https://imgur.com/a/xjo4ZJb

Need to change the bulbs, and I've tried unscrewing the center bolt, and it'll come out, but there's clearly a nut on the other side keeping it attached to the glass diffuser plate. The plate stays attached to the fixture, so I can't get at the bulbs. I'm sure I'm missing something super obvious, so TIA for any help y'all can provide.

https://imgur.com/a/DkZPHci

Looking for some advice on replacing the blinds on our large arched window.

I'll admit I'm pretty undereducated when it comes to blinds and window treatments, so I'm hoping to get some insight into what our options are.

We recently received a quote for $2,800 CAD for a Palladian shelf, valance, and three individual blinds (one for each window section). Personally, I find that pretty expensive, especially considering we previously replaced 13 sets of blinds throughout our house using Home Depot's custom-cut blinds for approximately $900.

The main issue is that this window is 93 inches wide, which exceeds the available widths for the blinds we've been looking at.

My original thought was to have a Palladian shelf installed and then purchase and install three individual blinds myself for approximately $800 total.

The proposed blind measurements would be:

• Left: 22.75" wide × 58" long
• Middle: 47.5" wide × 58" long
• Right: 22.75" wide × 58" long

However, my biggest concern is the weight of the three blinds across a 93-inch shelf, particularly since there wouldn't be a centre support. I'd prefer not to drill directly into the vinyl window frame, and I'm worried about the shelf sagging over time.

Is a 93-inch Palladian shelf realistic with only side supports? Would three faux-wood blinds of these dimensions be too heavy? Are there alternative mounting methods or products I should be considering?

I'm open to different styles or approaches. Ideally, I'd like something that looks clean, matches the rest of our house, and doesn't cost nearly $3,000.

Any suggestions, experiences, or recommendations would be greatly appreciated!