Made in Gimp

Hi everyone! If you saw my previous post, you probably already know about this GIMP Puppet Warp plugin. Version 1.1.0 is now out, bringing significant performance improvements along with a few essential new features

Demo v1.1.0

https://reddit.com/link/1x83o7i/video/txhpo19y6zvh1/player

New Update: Improved performance on large images, along with workflow enhancements and new features

1. Warping

• Click to add pins, drag to deform; Shift snaps a drag to an axis
• Rotate and scale around any pin (orange ring: drag the dot to rotate, drag the body to scale; or Alt+wheel / Ctrl+wheel)
• Per-pin taper — how far a pin's influence reaches before it fades to the rest of the mesh (Shift+wheel, or the T field)
• Per-pin depth — when two warped regions overlap, higher depth draws in front ([ / ], or the D field). See Pin depth
• Pin Edge keeps the outer mesh border at its rest position
• Stiffness mesh derived from the layer's alpha: transparent areas stay soft, so a pin on empty background barely tugs the artwork

2. Canvas & preview

• Extend image grows the layer when pins pull pixels outside its bounds; the layer mask (if any) grows with it
• Live preview with three background modes: Below (first visible layer under), Composite (stack of all visible layers under), Off
• Mesh overlay in four styles (Cells / Triangles / Both / Off) with a custom line color, so you can see the quad grid while you work
• Pan, zoom, fit-to-view; the view widens automatically to show extended pixels

3. Workflow

• Undo / redo inside the dialog (Ctrl+Z, Ctrl+Shift+Z / Ctrl+Y)
• Multi-select pins (Shift+click, Ctrl+A), nudge with arrow keys (Shift = 10 px)
• Save / load the whole setup (pins, depth, taper, grid, options) as a JSON preset
• Non-destructive: every parameter is stored as JSON on the layer filter and travels with the .xcf. Reopen the tool to continue editing — including after an extend, where the padding is re-detected so pins never drift

The plugin is written in Python, with a C solver and a GEGL operation, works with GIMP 3.2

Source code and installation guide: https://github.com/hexsian/puppet-warp-gimp

If you try it and run into any bugs, or if there are features you think are missing, please open an issue on GitHub or just leave a comment here.

Deleting this later! Please follow this account it’s need more followers. Gimp: https://bsky.app/profile/gimpofficial.bsky.social

Hay, I just installed GIMP 2.99.10 and it runs like normal I think, but got these CMD messages when openning it for the first time:

(gimp-2.99.exe:16840): GLib-GIO-WARNING **: 15:15:08.255: Unexpectedly, UWP app `Microsoft.OutlookForWindows_1.2026.818.100_x64__8wekyb3d8bbwe' (AUMId `Microsoft.OutlookForWindows_8wekyb3d8bbwe!Microsoft.OutlookforWindows') supports 5 extensions but has no verbs

set device 'System Aggregated Pointer' to mode: disabled

(process:10444): GLib-GIO-WARNING **: 15:16:04.842: Unexpectedly, UWP app `Microsoft.OutlookForWindows_1.2026.818.100_x64__8wekyb3d8bbwe' (AUMId `Microsoft.OutlookForWindows_8wekyb3d8bbwe!Microsoft.OutlookforWindows') supports 5 extensions but has no verbs

(file-openraster.py:16136): GLib-GIO-WARNING **: 15:17:34.186: Unexpectedly, UWP app `Microsoft.OutlookForWindows_1.2026.818.100_x64__8wekyb3d8bbwe' (AUMId `Microsoft.OutlookForWindows_8wekyb3d8bbwe!Microsoft.OutlookforWindows') supports 5 extensions but has no verbs

Plugin signal handler: C:\Users\Casuario\AppData\Local\Programs\GIMP 2.99\lib\gimp\2.99\extensions\org.gimp.extension.goat-exercises\goat-exercise-lua.lua: fatal error

C:\Users\Casuario\AppData\Local\Programs\GIMP 2.99\lib\gimp\2.99\extensions\org.gimp.extension.goat-exercises\goat-exercise-py3.py:37: DeprecationWarning: bind_textdomain_codeset() is deprecated

gettext.bind_textdomain_codeset(textdomain, 'UTF-8')

Couldn't find useful info online, anything specific that may not work or that I sould be vigilant about?

Thanks!

I love GIMP but this one thing just keeps getting in the way.

I work a lot with UI and when I want to visualise how shifting things slightly, I paste a screenshot into GIMP, select with a rectangle, then cut + paste it around.

The Move tool keeps changing its mode to 'Move Selection' on its own when I paste in the new layer, sometimes. There doesn't seem to be a key modifier to change the mode back to Layer. So I paste, then try to move the pasted layer, and I instead move the rectangle selection I made to cut.

It's driving me insane. What causes this? and can I change a setting to keep it fixed to 'Layer' mode forever? I cannot think of when I would need the Move tool to ever do that, I can just move selections with the select tool...

Using the default pencil tool and a circular brush shape, it gives me a square instead at 3 and 5 pixels wide. Is there any way to change the shape of the pencil while still keeping it pixel perfect? Ive tried following several tutorials for custom brush shapes but everything Ive tried stops being pixel-perfect like the default brush

I first used version 2.8 then 2.10 for like 5 years and really liked the functions, selection, tools and stuff. When GIMP release version 3.0, I tested it and it was pretty different with the things I'm familiar with (mainly about the selection area, layer, fill area,...) I don't want to redo the dreaded learning curve again so I just switch back to 2.10 till this day lol

As I understand the newest version now is 3.2, so does it more easier to use now? Thanks

Hello,

I'm running gimp3-app-3.2.6 on FreeBSD 15.1-RELEASE-p5, trying to print to a Kyocera Ecosys laser printer.

I can pipe to lpr on the command line and it prints on the Kyocera. I can print using the LibreOffice print dialogue in full colour blah blah blah.., basically, it all works.

When I try to print from Gimp, though, it doesn't work. The Kyocera shows up in the print dialogue, all the various options seem to do what they're supposed to, and when I click "Print" the printer responds and I can see the "Processing" light come on. But it only stays on for a second or two, nothing prints, and I can't see the job in the jobs list on the printer.

How can I troubleshoot this? By a process of elimination it feels like a Gimp problem, but I don't know where to start. What logs do I look in?

Obviously, I could just print to PDF and then print that using different software, but it's a bit of kludge, isn't it?

Thanks,
Ben

Hi I’m trying to install GIMP. Have a mac. M1 Pro. Sonoma 14.7.2 OS. I’m trying to download the most recent version of gimp (also tried older versions). The program will not launch.

I had GIMP before and it worked no problem. A recent message showing I couldn’t open a gimp file indicated that the version I had downloaded and used successfully before was not current enough, so I thought I would upgrade.

I download and drag the app into the apps folder like all Mac programs I’ve done before.

When I launch the program, it appears in the side bar and just bounces until it stops. No window opens. I asked the AI for help but I can’t get it working. HELP !!

I've never ever had this issue before, but when I change the hue and then paint with the paintbrush, the colors themselves are inverted. So If I changed green to blue and then started painting with a green hue, it'd paint blue instead of green.

Sonic's speed is power!

Made in Gimp

The 2nd image with the red tip on the d is what it looks like when exported. Is there a way I can fix this?

Hi everyone! I’m currently editing a manga page in GIMP, but I’m running into an issue with text scaling.

Whenever I make a text layer smaller, it gets very pixelated and loses quality. Is there a way to convert a text layer into a vector layer (or paths) so I can resize it without losing quality, or is there a better workflow for handling text scaling in manga editing?

Thanks in advance for any tips!

Why can't python-fu set the default font size? I wanted to make a script that would setup my environment. And another script to switch to a different environment. But apparently this is impossible. I would think supporting multiple simultaneous workflows would be normal.

Clipboard support is broken. When I copy an image from SFSymbols and try to paste it (Create from Clipboard) to GIMP, I see this error: "There is no image data in the clipboard to paste." Same with images copied from a browser. And when I copy a file, it pastes it as the PNG icon, that you see on the background, lol.

I think before I had GIMP 3.2.4 and everything worked.

creating new projects leads to this screen, what the hell?!

Best keep with gimp

I'm generally anti-ai in most cases, and I think we've all seen the recent vibecoded "adobe killer" apps, photocraft specifically in relation to photoshop and GIMP

and whenever someone says "just use GIMP" in a comments section for photocraft (and in the past in comment sections about adobe's greed and photoshop) i'll download gimp, install it, look at the horrible UI, then close the app immediately and boot back into photoshop (or if i'm using a PC without adobe apps and want to do something in a pinch i'll use photopea on the browser)

why doesn't GIMP just copy the photoshop interface?

the problem with photoshop is that it costs money FOREVER, the subscription is expensive and never ending, and that it's NOT open source

the problem with photopea is that it's browser based, and has ads unless you pay for the subscription, and it's also NOT open source

the problem with GIMP is that the user interface is ugly (i'm sorry, we're designers and this stuff does in fact matter) and it sucks for people migrating from photoshop, but it has the benefit of being both free AND open source

now photocraft has been brought into existence... unethically via ai... but...

it's free, it's open source, and it looks and works almost exactly like photoshop...

an additional benefit i didn't even think of until i saw a comment about it is that it also has a tiny file size (about 80mb) which is less than half of GIMP (182mb), which are both a hell of a lot smaller than photoshop (north of 10 gigabytes lol)

and on the website it has an option to download the app portably, meaning you don't have to install anything, just unzip the folder and double click the EXE...

I'm not trying to shill for the ai vibecoded app... but GIMP has been around since 1995, blender was technically around since 1994 but only became FOSS in 2002, and in the 2000s photo editing was a much bigger need than 3D modeling for the average individual

why hasn't GIMP had it's "blender moment" yet?

is it on the way and maybe I just have no idea because i'm not in the loop?

i googled if there was a solution to this and it seems like there's a github project that attempts to rectify this here called PhotoGimp https://github.com/Diolinux/Photogimp

but even that is rather janky and nowhere close to photoshop (also this PhotoGimp mod/skin shows claude in the github contributors so it's ai as well...)

if GIMP just had a ui overhaul it would 100% gain millions of users overnight, people could not wait for the blender 2.8 release when it was being hyped up and i learned blender and even got a job as a Graphic Designer & 3D artist because of it.

I would love to support GIMP but this feels like the main barrier preventing it from reaching mainstream success and appeal

sorry for the massive paragraph but i just had to get this off my chest as a FOSS fan that can't believe adobe hasn't had any real competition in decades until ai came around...

So I have some .dds texture files. I noticed that when I open them in GIMP and export them again without modifications, something in the file data changes even though I keep all the settings the same (mipmaps, DXT1, etc.)

The file size is the same, and visually everything looks the same. Yet the file hashes are different, meaning some data was modified. Furthermore, when I try to compress the file even further (e.g. using oodle), the GIMP-exported version always has a slightly larger size.

Anyone know what's the issue here?

Image here is compressed. Original is 8k

GIMP palette previews don't look good at larger sizes - they appear broken and poorly formatted (as seen in the first two screenshots). I suggest two improvements:

• Palette previews should be rectangular
• Empty spaces should be filled with repeating cells of the available colors

Please refer to the last two screenshots for comparison.

P.S. I really don't need the abuse for making these suggestions, so please refrain from commenting if you think this is 'laughable'.