Just wanted to give Fanatec support a shout out. I bought a used wheel on fb marketplace out of warranty and it turned out to have bent/missing pins. I contacted support to see if they had the part in stock so I can buy it to repair the wheel hub. They offered it to me free of charge. Thank you again 🙏

Recently got my dream rally wheel to experience some rallying, Is there any recommendations for this button module’s control and force feedback settings (rocks a dd+), appreciated

Hi all,

Last week, I received an email from Fanatec saying that QR2 prices would remain low following the success of their last sale. So, I thought it would be a good time to upgrade my wheels! I currently have the Clubport formula V2.5, which I'm very happy with, and the P1, which is a bit underwhelming.

I hope you guys and girls can help me with three questions:

1. Is the new QR2 really an upgrade? I can imagine it makes a difference for the P1 wheel, which has the plastic QR.
2. They're currently selling the CSL 320 V2 for €229.95, claiming it's almost €90 off the regular price. Is this actually a good deal, or has it been available at this price for ages? Would it be worth waiting for the Black Friday deals?
3. If you own this wheel, what has your experience with it been like?

Thanks in advance for your help!

Need help, my fanatec dd pro brake pedal started squeeking and making this loud annoying sound whenever I brake.

It started happening this week and my setup is relatively new as I bought it at the beginning of the year.

If anyone could please help me fix this it would be great thanks.

Feel free to ask me any questions.

Brake pedal stopped working, I replaced the load cell but the software still shows no input whatsoever from the brake pedal. Is it possible that the hub underneath the pedals is bad? I tried plugging the clutch and throttle pedals into the brake input and it doesn’t work. Is it possible it could be the wheel base the pedals plug into?

I want to buy the Clubsport RS, I’ve been waiting part of this year for the end of the year in case Fanatec renews it or a new round version comes out, I’m seeing that everything is going very slowly and that the best thing is perhaps to wait for an offer on blackfriday of the already more than classic Clubsport RS and go for it, because if I have to be waiting for a new version...., what would you do? I currently ride the CSL Elite P1 V2

This is not a stock McLaren GT3 wheel. It has been upgraded with several high-quality modifications to create a unique, race-ready wheel that looks as good as it performs.

Custom GT7 Upgrades

• Custom thick vinyl GT7-themed faceplate — professionally applied for a bold Gran Turismo-inspired look.
• Custom PS5 buttons — blue and red buttons are specifically configured for PlayStation/GT7 use and clearly labeled on the wheel.
• VoCore.io display installed — use SimHub to run a variety of customizable HUD layouts directly on the wheel. Display information such as speed, RPM, gear, fuel, lap information, tire data, timing and much more.
• Upgraded blue aluminum QR2 Quick Release — a substantial upgrade from the standard quick-release system, providing a solid, premium connection to your wheel base.

The McLaren GT3 V2 provides an excellent combination of realistic GT-style controls, ergonomic design, and immersive sim-racing functionality. The integrated VoCore display takes it a step further by putting critical race information directly in your line of sight.

Compatible with supported Fanatec wheel bases and PC/PlayStation setups, making it an excellent choice for Gran Turismo 7 on PS5 as well as PC sim racing.

The VoCore display is driven through SimHub, allowing you to choose from numerous existing dashboards or create/customize your own.

What's Included

• Fanatec McLaren GT3 V2 Racing Wheel
• Custom GT7 vinyl faceplate
• Custom blue/red PS5 buttons
• Installed VoCore.io display
• Upgraded blue aluminum QR2 Quick Release

Only used to check functions after customization. Comes from a pet- and smoke-free home.

Asking $385

Bonjour à tous,

J’ai un problème avec mon fanatec CSL DD.
Alors voilà quand je joue je dois légèrement tiré sur le volant a certain moment et de ce fait le volant ce déconnecte…
J’ai déjà démonté et remonté le QR, serrer à fond mais rien n’y fais
Avez vous une solution pour accrocher le volant (j’ai un gt3 CSL) et une base CSL DD acheter fin 2025
Je trouve que le côté plastique est trop peu résistant et je ne sais pas quoi faire…

Merci d’avance pour votre aide

Was setting up a new monitor on my rig and decided to take a peek at Fanatec pedals and while browsing around the US site I saw the Boost 180 kit was only 60 bucks. Didn't see it mentioned in a search of the sub so I figured I shout it out in case anyone wanted to pick up an upgrade for cheap like me.

What is the current opinion on switching to the app ? I tried the app about a year ago and it did not do anything for me. I actually found it more difficult to determine what my wheel settings were since the app would change them at times.

Did i miss something? I was looking on the website and when I selected uk as my location, the bmw gt2 wheel isn't listed.

I hope this is an error as I've always wanted that wheel

Loose magnet, what type of glue should I use?

my brake input started dropping during a race.. until it eventually stopped registering completely. The throttle and clutch are still working normally, but the brake gives absolutely no input.

Ive tried a couple of things..
Dismantled the pedals from my rig and cleaned them.
Disconnected and reconnected all the cables.
Swapped the complete pedal electrical connections at the pedal base to test them in different positions.
The throttle and clutch work when connected to each other’s inputs.
The brake doesn’t work regardless of which input I connect it to.
The throttle and clutch also give no reading when connected to the brake input.
I’ve also removed the brake rod and elastomers to inspect the assembly. I noticed that the RJ connector on the brake cable has some black marks on the contacts that I don’t see on the throttle or clutch connectors. I’ve attached photos.

Been checking online and the only thing I found close enough was someone saying the eventually had to replace the load cell.

From ARTech-USA on Etsy

It feels cheesy now!

Feedback is practically non existent.

Is there a setting somewhere that I'm not seeing?

Is it because GT7 has switched wheel manufacturers to Moza and their phasing out fanatec?

I've put over $1,700.00 into my rig! That's alot of money on my meager salary. I don't want to buy another wheel setup!

help......

I know I need to update or downgrade the main software but I don't know which one to download. Honestly i don't know which one to switch.... > : {

I just picked this up from a 3rd party sale the other night. I really wanted to like it.

I play Gran Turismo 7 on PS5, I only play with gloves on and in VR.

I do enjoy the dual thumb encoders and the thumb rests on the grips.

Even though it's wider than the V2.5, I don't like how narrow it is. I even thought of keeping it for another rig setup. I have a CS DD, pedals etc that I had prior to upgrading to a CS DD+, Simnet SP Pros and an Octane Sequential.

I used it 3 separate times, and for shoulder width and hand placement, it's just too narrow for me. I feel like the shifters are too close, my thumb hits the shifter module and keeps bumping the encoders. LoL

So anyway. I'm asking for $290.00 there is no box. I do have the bag of button covers he gave me as well.

It has the metal QR2, just not the QR2 Pro(I'm not sure if that is an option from Fanatec).

Located near PGH Airport.

asking for $290.00 OBO
there is no box

Hey guys im having a hard time finding 3d print files for the backplate conversion so i can have QR on my CSL Elite p1 V1 wheel. I have found 2 links, both are down - from Fanamod and some random.

Does anyone still have the files id really appreciate it. It looks like this:

https://www.etsy.com/listing/4597169726/fanatec-podium-button-module-endurance

It took some time, but in 2027 we'll have a wheel with decent screen and Simhub support!

Project obsidian has been showcased at the 2026 Frankfurt simracing expo.

What do you recon the price will be?

Here are the other goodies that are coming: https://forum.fanatec.com/news/project-obsidian-and-more-surprises-at-simracing-expo-frankfurt-2026-r600/

My shifter will repeat late try and shift me in the fifth gear when in neutral. Other gears are also affected as seen in the video.

I've already tried the electrical trick to insulate. Fix it for a month or so but it's back again and even after replacing tape a second time has no effect. Any ideas?

Hi Guys

Has some weird stuff going on today. After updating GT7 i thought id play for a while.

About 10 mins in, I hear this RANDOM "SIREN" sound which appears to be either coming from my porsche gt vision wheel or my clubsport DD+ ( didn't even know it had a speaker ?)

I wasn't sure what i heard, i continued to play for about 20-30 mins, and then AGAIN this weird SIREN sound, fairly loud, like a speaker sound i can't describe it?

Played another 30-40 mins and then randomly again....

Any ideas?

Hi, I recently bought these pedals used, and they came with vibration motors, but they weren't installed. Is it worth installing them, or will they be annoying in the long run? I'd have to solder them first because the previous owner ripped the wires...

I mainly play GT3 in iRacing.

Thanks!