Whats up everyone. Decided I want to have more fun and pick up the infamous YEET CANNON (9mm). - forgive me if it only comes in 9mm with the words yeet on the slide

Seems like a solid ass suppressor host but no experience.

I have a Rugged Obsidian 9 not that it really matters with a fixed barrel. This is my vision and please do not school me about the NFA laws of pistols and rifle definitions. I am FULLY aware of the rules. I can see it now… maybe a fore grip and a stupid big prism scope or perhaps a romeo 7 I have lying around. Would be cool for some way to add a brace/stock foldy boy on this MF’r too hahaha. And to top it off, take out to the garage and paint it GOLD. Or chrome, or something bloody awful and tacky. This seems fun to me.

TLDR**** Anyone know of some off the wall accessories/upgrades/after market parts for this gun? Looking forward to this. Thanks in advance. Be safe 2A friends……. YEET YEET MOTHERFUCKER 🤣

Put this together recently, shaved down the iron sight threaded posts on the picatinny rail to allow the scope to be mounted further back towards the stock. Got rid of the crappy warped under barrel picatinny. Added side picatinny rails to hold an IR emitter, also has a sling that isn't pictured. I run 147 gr JHP's through it without issue.

Has anyone tested ballistic performance with this combination?

I have two HiPoint C9 pistols. One is the original Yeet Cannon bought because I could. The other I picked up at a pawn shop for 99 bucks BIG SPENDER. It came with two different firing pins and I am unable to tell which one if either will work with it. When I look online the images show 4 different types for the model with no way to determine which is best. The ones I have are the same overall length but one is beveled on the pin end while the other has a slightly longer back for the spring to slide into. The one with the slightly longer spring end was in when I went to the range and it would not fire the round nor dimple it. I installed the beveled one and it passes a function check. It did before too. Any suggestions or if there is a list that says type goes with specific serial numbers.

Checking to see if anyone has heard any details about Hi-Point looking to release higher capacity magazines for the YC9 and C9 pistols.

Much appreciated!!

I just bought a new gun it is a Smith & Wesson 40 JCP I am looking for some accessories to put on it hopefully an optic. Any suggestions?

Bought a new C9 a few years ago, haven't shot it much. Took it to the range today and noticed when I fire a round the gun (slide?) pinches my trigger finger. Not painful, just annoying.

Anyone know how to fix it?

I’m on a Hi Point kick lately. Although I already had a Gen 2 YC9. When I saw this circa 80’s - 90’s woodland camo edition, I HAD to buy it.

I served in the Marine Corps from 1990 - 1996. This camo design was part of my “work clothes” aesthetic. 😂. I just picked it up yesterday and I’m very impressive with the quality of the paint application. The gun itself just feels better sorted out than my earlier Yeet Cannon from last year.

The magazine seats better in the gun and doesn’t feel like it’s going to creep its way out. This was my biggest complaint with my older one.

I had made a post earlier about my JXP 10 optics from the violence of the slide recoil.

I purchased an ADE optic and after firing 100 rounds, all is good to go. 👍

But I decided to continue. Besides the grips being changed, I added the Hi Point muzzle brake, and swapped out the plastic trigger for a machine aluminum trigger from Thingmeister.

My range is out of service till next Thursday due to storm damage. But I’m looking forward to testing out the other modifications.

Hello all.
Those of you that have had a C9 and a YC9, which do you prefer? Asking from a reliability standpoint more than anything. Glocks and Sigs and S&Ws are the labs and GSPs of guns; which of the Hi Points is the cur dog you wouldn’t give up?

Side thought, which grain bullet did it prefer? Is one brand/grain combination better for it?

Thank you.

My JXP10 has already destroyed two red dots because of the forcefulness of the slide recoil. Anybody have a suggestion on a red dot that’s worked for them on this gun?

Disclaimer - I'm a Glock guy, the vast majority of my handguns are Glocks, but I've gotten into hi points for fun recently.

I actually have a lot of fun shooting my c9 and I wanna start collecting HP's. Is the compensated .380 any good? I'm interested to see how smooth it would be, but the blowback design would lead me to believe the compensator would cause cycling issues.

I use to work at their Mansfield location.i was there 21 years. Laid off due to mismanagement issues and market demands, was asked to come back once I said no, now I work for the railway and make more money

But what has happened to this brand? As an outsider now looking in they seem to push accessories more especially after the YC9 fiasco.

A place once thriving with 60+ employees now dwindled down to 12 ish cars in the parking lot.

I’ll answer questions about my time there, but I want to know the outsiders pov on why their fine just aren’t selling? When I was there we had issues with it of course but the few that are there now, I speak to don’t seem too fond of it, just hanging out and hoping I think.

JXP 10mm

Wood Grips

Rmsc/SMS plate from hipoint

CT RAD Micro Pro

Harbor Freight WPN light

I just got these sweet new grips. Fit was good, and they included the tiny springs too. What do you all think? 🤔

In the Post I made last month about upgrading the trigger spring, someone recommended I check out Thing Meister triggers. I did, and ordered 2 red for both of the 45s. The quality is great, fit and finish. Install was interesting with my old eyes and big fingers 🤣. Overall I like these, and not an expensive upgrade, feels better than the plastic factory trigger. 👍

I know this is not a very popular firearm, but has anyone found a company that makes a molded holster for it?

This is of course not the only firearm in my collection, but I bought it to have the most cost effective 10mm I could get. And honestly, despite feeling a 5 lb brick, it runs just fine.

My intended use is as a woods gun, gator/bear deterrent in central Florida.

I am contemplating buying one ( holster) if available, versus just making my own.

Thanks for any info.

Howdy all, I bought an old C9 for a friend of mine but I noticed a couple potential problems with it.
One is that when it's empty if I shake it or even just like move it around it makes a sort of jingling noise and if I shine a light up the mag well I can see stuff moving around. Is that normal or should I take it to a gunsmith / use the warranty and ask hi-point to fix it? I've never owned a hi-point or even a striker-fired handgun before so I don't know if that's just a feature of striker-fired guns or not. It stops making the noise if I rack the slide.

Just for fun, I want to get the gen 1 pistol - https://www.hi-pointfirearms.com/hi-point-handguns/40-sw-handguns/jcp-40-camo-handguns/#prettyPhoto

And the similar rifle - https://www.hi-pointfirearms.com/hi-point-carbines/40-sw-carbines/4095-camo-carbines/#prettyPhoto

Can the magazines be switched between the two? The LOOK like they can but I can't find anything that confirms this. I am pretty sure the gen 2 pistols magazines are different so I want the gen 1 if they can share mags with the rifle. Does anyone know?

I installed the M*Carbo sheer springs today, I strongly recommend definitely watch the install videos, they're a great help if this is your time taking them both apart. Haven't shot them yet, but I can definitely feel a difference. Probably the best must do/cheap modification, upgrades one can do for theses guns. Plus you get an awesome sticker 😁

And this, ladies and gentlemen, is what lipstick, when applied correctly, looks like on a couple of pigs. Grips and ghost sights on both, and a 1911 Mag Conversion Kit on the .45. $145, all in, on the JHP, and $95, all in, on the C9.